DatasheetsPDF.com

MAX7321

Maxim Integrated Products
Part Number MAX7321
Manufacturer Maxim Integrated Products
Description I2C Port Expander
Published Nov 8, 2006
Detailed Description MAX7321 I2C Port Expander with 8 Open-Drain I/Os General Description The MAX7321 2-wire serial-interfaced peripheral f...
Datasheet PDF File MAX7321 PDF File

MAX7321
MAX7321


Overview
MAX7321 I2C Port Expander with 8 Open-Drain I/Os General Description The MAX7321 2-wire serial-interfaced peripheral features eight open-drain I/O ports with selectable internal pullups and transition detection.
Any port may be used as a logic input or an open-drain output.
Ports are overvoltage protected to +6V independent of supply voltage.
All I/O ports configured as inputs are continuously monitored for state changes (transition detection).
State changes are indicated by the open-drain INT output.
The interrupt is latched, allowing detection of transient changes.
When the MAX7321 is subsequently accessed through the serial interface, any pending interrupt is cleared.
The open-drain outputs are rated to sink 20mA and are capable of driving LEDs.
The RST input clears the serial interface, terminating any I2C communication to or from the MAX7321.
The MAX7321 uses two address inputs with four-level logic to allow 16 I2C slave addresses.
The slave address also determines the power-up logic state for the I/O ports, and enables or disables internal 40kΩ pullups in groups of four ports.
The MAX7321 is one device in a family of pin-compatible port expanders with a choice of input ports, open-drain I/O ports, and push-pull output ports (see Table 1).
The MAX7321 is available in 16-pin QSOP and TQFN packages, and is specified over the automotive temperature range (-40°C to +125°C).
Applications ●● Cell Phones ●● SAN/NAS ●● Servers ●● Notebooks ●● Satellite Radio Pin Configurations + AD0 1 RST 2 AD2 3 P0 4 MAX7321 P1 5 P2 6 P3 7 GND 8 QSOP 16 V+ 15 SDA 14 SCL 13 INT 12 P7 11 P6 10 P5 9 P4 Features ●● 400kHz I2C Serial Interface ●● +1.
71V to +5.
5V Operating Voltage ●● 8 Open-Drain I/O Ports Rated to 20mA Sink Current ●● I/O Ports Are Overvoltage Protected to +6V ●● Any Port Can Be a Logic Input or an Open-Drain Output ●● Selectable I/O Port Power-Up Default Logic States ●● Transient Changes Are Latched, Allowing Detection Between Read Operations ●● INT...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)