DatasheetsPDF.com

LPS128

Emerson
Part Number LPS128
Manufacturer Emerson
Description AC-DC / 86W - 135W
Published Oct 25, 2009
Detailed Description Embedded Power for Business-Critical Continuity LPS120 Series 120 Watts Total Power: Input Voltage: # of Outputs: 80...
Datasheet PDF File LPS128 PDF File

LPS128
LPS128

Overview
Embedded Power for Business-Critical Continuity LPS120 Series 120 Watts Total Power: Input Voltage: # of Outputs: 80 - 130 Watts 85 - 264 VAC Single Rev.
09.
15.
09_12 LPS120 Series  of 3 Special Features • • • • • • • • • • • • • Active power factor correction 3” x 5” footprint Less than 1U high EN61000-3-2 compliant Remote sense Power fail and remote inhibit Single wire current sharing Adjustable main output Built-in Class B EMI filter Overvoltage protection Overload protection Thermal overload protection 5 V Standby output and 12V Fan output Electrical Specifications Input Input ra­nge: Frequency: Inrush current: Efficiency: EMI/RFI: Power factor: Safety ground leakage current: 85 - 264 VAC ; 127 - 300VDC 47 - 440 Hz 40 A max.
, cold start @ 25 °C 80% typical at full load FCC Class B conducted; CISPR22 Class B conducted; EN55022 Class B conducted; VDE0878PT3 Class B conducted 0.
99 typical 0.
5 mA @ 50/60 Hz, 264 VAC input  Output Maximum power: Adjustment range: Fan output: Standby outputs: 80 W for convection ; 130 W with 30CFM forced air ± 5% minimum on the main outputs 12 V @ 500mA - 5%, +7% 5V @ 500mA ± 5% Hold-up time: 20ms @ 125 W load, 120 VAC input Overload protection: Short circuit protection on all outputs.
Case overload protected @ 120 - 135% above rating Overvoltage protection: 20 - 35% above nominal output Remote sense: Compensates for 0.
5 V lead drop max.
Will operate without remote sense connected.
Reverse connection protected.
Logical Control Safety TUV: UL: CSA NEMKO: AUSTEL: CB: CE: 60950 60950 60950 60950 60950 Certificate and report Mark (LVD) Power failure: Remote inhibit: Remote sense:  TL logic signal goes high 100 - 500 msec after main output; it goes low at T least 4 msec before loss of regulation Requires a contact closure to disable the outputs, except 5 V standby.
 ompensates for 0.
5 V lead drop min.
Will operate without remote sense C connected.
Reverse connection protected.
Embedded Power for Busine...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)