DatasheetsPDF.com

SC623

Semtech Corporation
Part Number SC623
Manufacturer Semtech Corporation
Description LED Light Management Unit Charge Pump
Published Dec 22, 2009
Detailed Description SC623 LED Light Management Unit POWER MANAGEMENT Features „ „ „ „ „ „ „ „ „ „ „ „ „ „ „ Charge Pump, 4 LEDs, 400mA Flas...
Datasheet PDF File SC623 PDF File

SC623
SC623

Overview
SC623 LED Light Management Unit POWER MANAGEMENT Features „ „ „ „ „ „ „ „ „ „ „ „ „ „ „ Charge Pump, 4 LEDs, 400mA Flash LED, and SemWireTM Interface Description The SC623 is a high efficiency charge pump LED driver using Semtech’s proprietary mAhXLifeTM technology.
Performance is optimized for use in single-cell Li-ion battery applications.
The charge pump provides backlight current in conjunction with four matched current sinks.
It also can supply continuous or bursted current to a flash LED using the dedicated flash driver current sink.
The load and supply conditions determine whether the charge pump operates in 1x, 1.
5x, or 2x mode.
An optional fading feature that gradually adjusts the backlight current is provided to simplify control software.
A flash-timeout feature disables the flash if active for longer than 1 second.
The SC623 uses the proprietary SemWireTM single wire interface.
The interface controls all functions of the device, including backlight and flash currents.
The single wire implementation minimizes microcontroller and interface pin counts.
The flash/spotlight output is triggered via either the SemWire interface or a dedicated pin.
In sleep mode, the device reduces quiescent current to 100μA while continuing to monitor the serial interface.
Total current reduces to 0.
1μA in shutdown.
Input supply voltage range — 3.
0V to 5.
5V Charge pump modes — 1x, 1.
5x and 2x Four programmable current sinks with 32 steps from 0.
5mA to 25mA Flash LED — 400mA max in flash mode, 250mA max continuous for spotlight Charge pump frequency — 250kHz SemWireTM single wire interface — up to 75kbit/s Backlight current accuracy ±1.
5% typical Backlight current matching ±0.
5% typical Programmable fade-in/fade-out for main backlight External flash control pin to sync with camera Optional 1s flash time out Automatic sleep mode (LEDs off ) — IQ = 100μA Low shutdown current — 0.
1μA (typical) Ultra-thin package — 3mm x 3mm x 0.
6mm Fully WEEE and RoHS compliant Applications „ Ce...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)