DatasheetsPDF.com

NCT72

ON Semiconductor
Part Number NCT72
Manufacturer ON Semiconductor
Description Temperature Monitor
Published Oct 29, 2014
Detailed Description NCT72 +15C Temperature Monitor with Series Resistance Cancellation The NCT72 is a dual-channel digital thermometer and ...
Datasheet PDF File NCT72 PDF File

NCT72
NCT72


Overview
NCT72 +15C Temperature Monitor with Series Resistance Cancellation The NCT72 is a dual-channel digital thermometer and undertemperature/overtemperature alarm, intended for use in PCs and thermal management systems.
It is pin and register compatible with the NCT1008 but the NCT72 allows the user to pull the ALERT pin to 1.
8 V without increasing the device Idd.
A feature of the NCT72 is series resistance cancellation, where up to 1.
5 kW (typical) of resistance in series with the temperature monitoring diode can be automatically cancelled from the temperature result, allowing noise filtering.
The NCT72 has a configurable ALERT output and an extended, switchable temperature measurement range.
The NCT72 can measure the temperature of a remote thermal diode accurate to ±1°C and the ambient temperature accurate to ±3°C.
The temperature measurement range defaults to 0°C to +127°C, compatible with the NCT1008, but it can be switched to a wider measurement range of −64°C to +191°C.
The NCT72 communicates over a 2-wire serial interface, compatible with system management bus (SMBus/I2C) standards.
The default SMBus/I2C address of the NCT72 is 0x4C.
An NCT72D is available with an SMBus/I2C address of 0x4D.
This is useful if more than one NCT72 is used on the same SMBus/I2C.
An ALERT output signals when the on-chip or remote temperature is out of range.
The THERM output is a comparator output that allows on/off control of a cooling fan.
The ALERT output can be reconfigured as a second THERM output, if required.
Features • On-chip and Remote Temperature Sensor • 0.
25°C Resolution/1°C Accuracy on Remote Channel • 1°C Resolution/1°C Accuracy on Local Channel • Series Resistance Cancellation Up to 1.
5 kW • Extended, Switchable Temperature Measurement Range 0°C to +127°C (Default) or –64°C to +191°C • Pin and Register Compatible with NCT1008 • Remote THERM Limit of 108°C • 2-wire SMBus/I2C Serial Interface with SMBus Alert Support • Programmable Over/Undertemperature Limits • Offset ...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)