DatasheetsPDF.com

24C16

Turbo IC
Part Number 24C16
Manufacturer Turbo IC
Description 16K ELECTRICALLY ERASABLE PROGRAMMABLE ROM
Published Apr 14, 2015
Detailed Description Turbo IC, Inc. 24C16 CMOS I²C 2-WIRE BUS 16K ELECTRICALLY ERASABLE PROGRAMMABLE ROM 2K X 8 BIT EEPROM FEATURES : • Ext...
Datasheet PDF File 24C16 PDF File

24C16
24C16

Overview
Turbo IC, Inc.
24C16 CMOS I²C 2-WIRE BUS 16K ELECTRICALLY ERASABLE PROGRAMMABLE ROM 2K X 8 BIT EEPROM FEATURES : • Extended Power Supply Voltage Single Vcc for Read and Programming (Vcc = 2.
7 V to 5.
5 V) • Low Power (Isb = 2µa @ 5.
5 V) • I²C Bus, 2-Wire Serial Interface • Support Byte Write and Page Write (16 Bytes) • Automatic Page write Operation (maximum 10 ms) Internal Control Timer Internal Data Latches for 16 Bytes • Hardware Data Protection by Write Protect Pin • High Reliability CMOS Technology with EEPROM Cell Endurance : 1,000,000 Cycles Data Retention : 100 Years DESCRIPTION: The Turbo IC 24C16 is a serial 16K EEPROM fabricated with Turbo’s proprietary, high reliability, high performance CMOS technology.
It’s 16K of memory is organized as 2,048 x 8 bits.
The memory is configured as 128 pages with each page containing 16 bytes.
This device offers significant advantages in low power and low voltage applications.
The Turbo IC 24C16 uses the I²C addressing protocol and 2-wire serial interface which includes a bidirectional serial data bus synchronized by a clock.
It offers a flexible byte write and a faster 16-byte page write.
The data in the upper half of memory can be protected by a write protect pin.
The Turbo IC 24C16 is assembled in either a 8-pin PDIP or 8-pin SOIC package.
Pin #1, #2, and #3 are not connected (NC).
Pin #4 is the ground (Vss).
Pin #5 is the serial data (SDA) pin used for bidirectional transfer of data.
Pin #6 is the serial clock (SCL) input pin.
Pin #7 is the write protect (WP) input pin, and Pin #8 is the power supply (Vcc) pin.
PIN DESCRIPTION NC NC NC GND 18 27 36 45 VCC WP SCL SDA 8 pin SOIC NC NC NC GND All data is serially transmitted in bytes (8 bits) on the SDA bus.
To access the Turbo IC 24C16 (slave) for a read or write operation, the controller (master) issues a start condi- tion by pulling SDA from high to low while SCL is high.
The 1 8 VCC master then issues the device address byte which consists of 1010 (B10)...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)