LED. APA1606ZGC Datasheet

APA1606ZGC Datasheet PDF

Part APA1606ZGC
Description SMD LED
Feature 1.6x0.6mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DI.
Manufacture Kingbright
Datasheet
Download APA1606ZGC Datasheet

1.6x0.6mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION OBSERVE P APA1606ZGC Datasheet





APA1606ZGC
1.6x0.6mm RIGHT ANGLE SMD CHIP LED
LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: APA1606ZGC
Green
Features
z 1.6mmx1.2mmx0.6mm right angle SMD LED,0.6mm thickness.
z Low power consumption.
z Wide viewing angle.
z Ideal for backlight and indicator.
z Package :2000pcs / reel.
z Moisture sensitivity level : level 3.
z Tinned pads for improved solderability.
z RoHS compliant.
Descriptions
z The Green source color devices are made with InGaN
Light Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipment and machinery must be electri
cally grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH3851
APPROVED: Wynec
REV NO: V.9B
CHECKED: Allen Liu
DATE: AUG/02/2016
DRAWN: L.T.Zhang
PAGE: 1 OF 5
ERP: 1203003655



APA1606ZGC
Selection Guide
Part No.
Emitting Color (Material)
Lens Type
APA1606ZGC
Green (InGaN)
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Iv (mcd) [2]
@ 20mA
Min. Typ.
200 400
Viewing
Angle [1]
2θ1/2
110°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Emitting Color
Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength
Green
515
nm
IF=20mA
λD [1]
Dominant Wavelength
Green
525
nm
IF=20mA
Δλ1/2
Spectral Line Half-width
Green
30
nm
IF=20mA
C
Capacitance
Green
45
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Green
3.3
4.1
V
IF=20mA
IR
Reverse Current
Green
50
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to CIE127-2007 standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
Units
Power dissipation
102.5
mW
DC Forward Current
25
mA
Peak Forward Current [1]
150
mA
Reverse Voltage
5
V
Electrostatic Discharge Threshold (HBM)
450
V
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
SPEC NO: DSAH3851
APPROVED: Wynec
REV NO: V.9B
CHECKED: Allen Liu
DATE: AUG/02/2016
DRAWN: L.T.Zhang
PAGE: 2 OF 5
ERP: 1203003655




@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)