Module. LP141X6-A1IB Datasheet

LP141X6-A1IB Datasheet PDF

Part LP141X6-A1IB
Description LCD Module
Feature LP141X6-A1IB; ( DataSheet : www.DataSheet4U.com ) SPECIFICATIONS LP141X6-A1IB LIQUID CRYSTAL DISPLAY TITLE: LP141.
Manufacture LG
Datasheet
Download LP141X6-A1IB Datasheet




LP141X6-A1IB
( DataSheet : www.DataSheet4U.com )
LP141X6-A1IB LIQUID CRYSTAL DISPLAY
SPECIFICATIONS
TITLE: LP141X6-A1IB REV. 1 PAGE 1 OF 22
DATA DISPLAY AG
LP141X6-A1IB
14.1“ XGA TFT LCD
PRELIMINARY
SPECIFICATION
The information given in this document is carefully checked and believed to be reliable. Data Display reserves the
right to make changes in product or specification at any time and without further notice. Data Display products are
not intended for use in systems in which failures of product could result in personal injury. All mentioned trademarks
are registered trademarks of their owner.
LG.Philips LCD: Rev. 0.2 Oct.6, 1999
DATA DISPLAY AG
Industriestrasse 1
D-82110 Germering
www.DataSheet4U.com
OCT 2000
http://www.datadisplay.de
Tel.: +49-89-894450-0
Fax: +49-89-894450-90



LP141X6-A1IB
LP141X6-A1IB LIQUID CRYSTAL DISPLAY
SPECIFICATIONS
TITLE: LP141X6-A1IB REV. 1 PAGE 2 OF 22
1. GENERAL DESCRIPTION
The LP141X6-A1IB is a Color Active Matrix Liquid Crystal Display with an integral
Cold Cathode Fluorescent Lamp(CCFL) back light system. The matrix employs a-Si
Thin Film Transistor as the active element. It is a transmissive type display operating
in the normally white mode. This TFT-LCD has a 14.1 inch diagonally measured
active display area with XGA resolution(768 vertical by 1024 horizontal pixel array).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are
arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is
determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of
more than 262,144 colors. The LP141X6-A1IB has been designed to apply the
interface method that enables low power, high speed low EMI. Flat Link must be
used as a LVDS(Low Voltage Differential Signaling) chip. The LP141X6-A1IB is
intended to support applications where thin thickness, low power are critical factors
and graphic displays are important. In combination with the vertical arrangement of
the sub-pixels, the LP141X6-A1IB characteristics provide an excellent flat panel
display for office automation products such as mobile industrial computers.
Timing
Control
Block
Power
Block
Column driver circuit
TFT-LCD
(1024×768)
CN2
Backlight Ass’y
General Features
Active screen size
Outline dimensions
Pixel pitch
Pixel format
Color depth
Luminance, White
Power Consumption
Weight
Display operating mode
Surface treatments
DATA DISPLAY AG
Industriestrasse 1
D-82110 Germering
14.1 inches (33.78 cm) diagonal
298.5 (H) × 227.5 (V) × 5.7 (D) mm (typ)
0.279 mm × 0.279 mm
1024 horiz. By 768 vert. Pixel RGB stripe arrangement
6-bit, 262,144 colors
150 cd/m2 (typ)
Total 4.54 Watt (typ)
500g (typ)
transmissive mode, normally white
hard coating(3H),
anti-glare treatment of the front polarizer
OCT 2000
http://www.datadisplay.de
Tel.: +49-89-894450-0
Fax: +49-89-894450-90



LP141X6-A1IB
SPECIFICATIONS
LP141X6-A1IB LIQUID CRYSTAL DISPLAY
TITLE: LP141X6-A1IB REV. 1 PAGE 3 OF 22
2. ABSOLUTE MAXIMUM RATINGS
The following are maximum values which, if exceeded, may cause faulty operation
or damage to the unit.
Table 1 ABSOLUTE MAXIMUM RATINGS
Parameter
Power Input Voltage
Operating Temperature
Storage Temperature
Symbol
VTTOCSCTP
Values
Min.
Max.
-0.3 +3.6
0 +50
-20 +60
Units
Vdc
°C
°C
Notes
at 25°
1,2
1,2
Note 1:
Note 2:
Temperature at 5 mm above display center of LCD Module.
Ta 40°C: 90 % RH max
Ta > 40°C: Absolute Humidity shall be less than Ta = 40° 90 % RH.
These shall be no dew condensation.
Humidity Min. 5% RH, Max. 90% RH
3. ELECTRICAL SPECIFICATIONS
3.1 Electrical Characteristics
The LP141X6-A1IB requires two power inputs. One is employed to power the LCD
electronics and to drive the TFT array and liquid crystal. The second input which
powers the CCFL, is typically generated by an inverter. The inverter is an external
unit to the LCD.
Table 2 ELECTRICAL CHARACTERISTICS
Parameter
Symbol
MODULE:
Power Supply Input Voltage
Power Supply Input Current
Differential Impedance
Power Consumption
Rush current
LAMP
Operating Voltage
Operating Current
Established Starting
Voltage
at 25°C
at 0°C
Operating Frequency
Power Consumption
Half Life Time
VZICCmCC
IRPUSc H
VIBBLL
PfBBLL
Min.
3.0
-
90
-
-
680
3.0
-
-
40
-
10,000
Values
Typ.
3.3
0.275
100
0.91
1.0
725
5.0
-
-
60
3.63
15,000
Max.
3.6
0.315
110
1.04
1.5
850
6.0
1170
1450
80
4.08
-
Units Notes
Vdc
A
ohm
Watts
A
1
2
1
3
VmRMAS
VVkRRHMMzSS
Watts
Hrs
4
5
6
7
Notes 1: The specified current and power consumption are under the Vcc = 3.3V,
25°C, fv = 60 Hz condition whereas Black pattern is displayed.
DATA DISPLAY AG
Industriestrasse 1
D-82110 Germering
OCT 2000
http://www.datadisplay.de
Tel.: +49-89-894450-0
Fax: +49-89-894450-90







@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)