DatasheetsPDF.com

NBSG11BA Datasheet

2.5V/3.3VSiGe 1:2 Differential Clock Driver with RSECL* Outputs

NBSG11 2.5V/3.3V SiGe 1:2 Differential Clock Driver with RSECL* Outputs *Reduced Swing ECL http://onsemi.com The NBSG11 is a 1-to-2 differential fanout buffer, optimized for low skew and ultra-low JITTER. Inputs incorporate internal 50 W termination resistors and accept NECL (Negative ECL), PECL (Positive ECL), CML, LVCMOS, LVTTL, or LVDS. Outputs.

ON
NBSG11BA.pdf

Preview
Preview

Preview

ON NBSG11BA Datasheet
NBSG11 2.5V/3.3V SiGe 1:2 Differential Clock Driver with RSECL* Outputs *Reduced Swing ECL http://onsemi.com The NBSG11 is a 1-to-2 differential fanout buffer, optimized for low skew and ultra-low JITTER. Inputs incorporate internal 50 W termination resistors and accept NECL (Negative ECL), PECL (Positive ECL), CML, LVCMOS, LVTTL, or LVDS. Outputs are RSECL (Reduced Swing ECL), 400 mV. MARKING DIAGRAM* SG 11 LYW • • • • • • • Maximum Input Clock Frequency up to 12 GHz Typical Maximum Input Data Rate up to 12 Gb/s Typical 30 ps Typical Rise and Fall Times 125 ps Typical Propagation Delay RSPECL Output with Operating Range: VCC = 2.375 V to 3.465 V with VEE = 0 V RSNECL Output with RSNECL or NECL Inputs with Operating Range: VCC = 0 V with VEE = -2.375 V to -3.465 V RSECL Output Level (400 mV Peak-to-Peak Output), Differential Output Only 50 W Internal Input Termination Resistors FCBGA-16 BA SUFFIX CASE 489 QFN-16 MN SUFFIX CASE 485G SG11 ALYW • • Compatible with Existing 2.5 V/3.




NBSG11 2.5V/3.3V SiGe 1:2 Differential Clock Driver with RSECL* Outputs *Reduced Swing ECL http://onsemi.com The NBSG11 is a 1-to-2 differential fanout buffer, optimized for low skew and ultra-low JITTER. Inputs incorporate internal 50 W termination resistors and accept NECL (Negative ECL), PECL (Positive ECL), CML, LVCMOS, LVTTL, or LVDS. Outputs.

ON
NBSG11BAR2.pdf

Preview
Preview




Preview

ON NBSG11BAR2 Datasheet
NBSG11 2.5V/3.3V SiGe 1:2 Differential Clock Driver with RSECL* Outputs *Reduced Swing ECL http://onsemi.com The NBSG11 is a 1-to-2 differential fanout buffer, optimized for low skew and ultra-low JITTER. Inputs incorporate internal 50 W termination resistors and accept NECL (Negative ECL), PECL (Positive ECL), CML, LVCMOS, LVTTL, or LVDS. Outputs are RSECL (Reduced Swing ECL), 400 mV. MARKING DIAGRAM* SG 11 LYW • • • • • • • Maximum Input Clock Frequency up to 12 GHz Typical Maximum Input Data Rate up to 12 Gb/s Typical 30 ps Typical Rise and Fall Times 125 ps Typical Propagation Delay RSPECL Output with Operating Range: VCC = 2.375 V to 3.465 V with VEE = 0 V RSNECL Output with RSNECL or NECL Inputs with Operating Range: VCC = 0 V with VEE = -2.375 V to -3.465 V RSECL Output Level (400 mV Peak-to-Peak Output), Differential Output Only 50 W Internal Input Termination Resistors FCBGA-16 BA SUFFIX CASE 489 QFN-16 MN SUFFIX CASE 485G SG11 ALYW • • Compatible with Existing 2.5 V/3.





NBSG11 2.5V/3.3V SiGe 1:2 Differential Clock Driver with RSECL* Outputs *Reduced Swing ECL http://onsemi.com The NBSG11 is a 1-to-2 differential fanout buffer, optimized for low skew and ultra-low JITTER. Inputs incorporate internal 50 W termination resistors and accept NECL (Negative ECL), PECL (Positive ECL), CML, LVCMOS, LVTTL, or LVDS. Outputs.

ON
NBSG11BAEVB.pdf

Preview
Preview




Preview

ON NBSG11BAEVB Datasheet
NBSG11 2.5V/3.3V SiGe 1:2 Differential Clock Driver with RSECL* Outputs *Reduced Swing ECL http://onsemi.com The NBSG11 is a 1-to-2 differential fanout buffer, optimized for low skew and ultra-low JITTER. Inputs incorporate internal 50 W termination resistors and accept NECL (Negative ECL), PECL (Positive ECL), CML, LVCMOS, LVTTL, or LVDS. Outputs are RSECL (Reduced Swing ECL), 400 mV. MARKING DIAGRAM* SG 11 LYW • • • • • • • Maximum Input Clock Frequency up to 12 GHz Typical Maximum Input Data Rate up to 12 Gb/s Typical 30 ps Typical Rise and Fall Times 125 ps Typical Propagation Delay RSPECL Output with Operating Range: VCC = 2.375 V to 3.465 V with VEE = 0 V RSNECL Output with RSNECL or NECL Inputs with Operating Range: VCC = 0 V with VEE = -2.375 V to -3.465 V RSECL Output Level (400 mV Peak-to-Peak Output), Differential Output Only 50 W Internal Input Termination Resistors FCBGA-16 BA SUFFIX CASE 489 QFN-16 MN SUFFIX CASE 485G SG11 ALYW • • Compatible with Existing 2.5 V/3.







@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)