OKL-T-3-W12N-C-S Datasheet
www.murata-ps.com
OKL-T/3-W12 Series
Programmable Output 3-Amp iLGA SMT PoLs
Typical unit
FEATURES
iLGA inspectable Land Grid Array 4.5-14Vdc input voltage range Programmable output voltage from 0.591-5.5Vdc Drives up to 200 μF ceramic capacitive loads High power conversion efficiency at 93% Outstanding thermal derating performance Short circuit and over current protection On/Off control and Power Good signal Optional Sequence/Tracking operation
(OKL2-T/3-W12 models) Certified to UL/EN/IEC 60950-1 safety, 2nd Edition RoHS-6 hazardous substance compliance
PRODUCT OVERVIEW
The OKL-T/3-W12 series are miniature non-isolated Point-of-Load (PoL) DC/DC power converters for embedded applications. Featuring inspectable Land Grid Array (iLGA) format, the OKL-T/3-W12 measures only 0.48 x 0.48 x 0.244 inches max. (12.2 x 12.2 x 6.2 mm max.).
The wide input range is 4.5 to 14 Volts DC. The maximum output current is 3 Amps. Based on fixed-frequency synchronous buck converter s.
Programmable Output 3-Amp iLGA SMT PoLs
www.murata-ps.com
OKL-T/3-W12 Series
Programmable Output 3-Amp iLGA SMT PoLs
Typical unit
FEATURES
iLGA inspectable Land Grid Array 4.5-14Vdc input voltage range Programmable output voltage from 0.591-5.5Vdc Drives up to 200 μF ceramic capacitive loads High power conversion efficiency at 93% Outstanding thermal derating performance Short circuit and over current protection On/Off control and Power Good signal Optional Sequence/Tracking operation
(OKL2-T/3-W12 models) Certified to UL/EN/IEC 60950-1 safety, 2nd Edition RoHS-6 hazardous substance compliance
PRODUCT OVERVIEW
The OKL-T/3-W12 series are miniature non-isolated Point-of-Load (PoL) DC/DC power converters for embedded applications. Featuring inspectable Land Grid Array (iLGA) format, the OKL-T/3-W12 measures only 0.48 x 0.48 x 0.244 inches max. (12.2 x 12.2 x 6.2 mm max.).
The wide input range is 4.5 to 14 Volts DC. The maximum output current is 3 Amps. Based on fixed-frequency synchronous buck converter switching topology, the high power conversion
efficient Point of Load (PoL) module features programmable output voltage and On/Off control. These converters also include under voltage lock out (UVLO), output short circuit protection, and over-current protections.
An optional sequence/tracking feature on OKL2-T/3-W12 models allows power sequencing of PoL’s. These units are certified to all standard UL/EN/ IEC 60950-1 safety certifications (2nd Edition) and RoHS-6 hazardous substance compliance.
Con.
2015-11-14 : S424CA S424GC S424GE S424GH S424IE S424IH S424GE MAX77596 OKR-T-1.5-W12-C OKI-T-3-W40N-C