Electrolytic Capacitors. PEH536JBC4390M Datasheet

PEH536JBC4390M Datasheet PDF


Part Number

PEH536JBC4390M

Description

Snap-In Aluminum Electrolytic Capacitors

Manufacture

Kemet

Total Page 13 Pages
Datasheet
Download PEH536JBC4390M Datasheet



PEH536JBC4390M
Snap-In Aluminum Electrolytic Capacitors
PEH536 Series, +105ºC
Overview
KEMET's PEH536 is a long-life electrolytic capacitor designed
to offer high ripple current capability and low mounting cost. Low
ESR is the result of a very low resistive paper/electrolyte system.
Low ESR, together with the TDC thermal concept, gives the
PEH536 a high ripple current capability.
Applications
Typical applications for KEMET's PEH536 capacitor include
switch mode power supplies (SMPS), drives, welding equipment,
uninterruptible power supplies (UPS), and other power electronic
applications where high current ratings and compact size are
important.
Benefits
• Snap-In
• 6,000 hours at +105°C
• PCB mounting
• Low ESR and ESL
• High ripple current
Part Number System
PEH536
Series
Snap-In type
Aluminum
Electrolytic
J
Voltage (VDC)
J = 35
M = 63
P = 100
R = 200
S = 250
U = 350
V = 400
Y = 450
AD
Size Code
See Dimension
Table
439
Capacitance Code (µF)
The second two digits
indicate the two most
significant digits of the
capacitance value. The
first digit indicates the
total number digits.
0
Version
0 = Standard
M
Capacitance
Tolerance
M = ±20%
2
Termination
See Termination
Table
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
One world. One KEMET
A4025_PEH536 • 9/9/2013 1
Free Datasheet http://www.Datasheet4U.com

PEH536JBC4390M
Snap-In Aluminum Electrolytic Capacitors – PEH536, +105ºC
Performance Characteristics
Item Performance Characteristics
Capacitance Range 47 – 18,000 µF
Rated Voltage 35 – 450 VDC
Temperature Range -40 to +105°C
Capacitance Tolerance ±20% at 100 Hz / +20°C
Operational Lifetime
+105°C (hours)
6,000
Shelf Life 4 years at +40°C 0 VDC
Leakage Current
I = 0.003 CV (µA)
C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C.
Vibration Test Specifications
Standards
Procedure
Requirements
0.75 mm displacement amplitude or 10g maximum
acceleration. Vibration applied for three 2-hour sessions at
10 – 500 Hz (Capacitor clamped by body).
No leakage of electrolyte or other visible damage.
Deviations in capacitance and tanδ from initial
measurements must not exceed: ∆ C/C < 5%
IEC 60384-4 long life grade 40/85/56, in accordance with CECC 30 301–809
Test Method & Performance
Conditions
Temperature
Test Duration
Ripple Current
Voltage
Performance
Capacitance Change
Equivalent Series Resistance
Leakage Current
Endurance Life Test
Performance
+105°C
2,000 hours
Maximum ripple current specified in table
The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor
The following specifications will be satisfied when the capacitor is tested at +20°C:
≤ 160 V
Within 15% of the initial value
> 160 V
Within 10% of the initial value
Does not exceed 200% of the initial value
Does not exceed leakage current limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
A4025_PEH536 • 9/9/2013 2
Free Datasheet http://www.Datasheet4U.com




@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)