|
|
Controller/Driver. ST7735R Datasheet |
|
|
ST
ST7735R
262K Color Single-Chip TFT Controller/Driver
1 Introduction
The ST7735R is a single-chip controller/driver for 262K-color, graphic type TFT-LCD. It consists of 396 source line and 162
gate line driving circuits. This chip is capable of connecting directly to an external microprocessor, and accepts Serial
Peripheral Interface (SPI), 8-bit/9-bit/16-bit/18-bit parallel interface. Display data can be stored in the on-chip display data
RAM of 132 x 162 x 18 bits. It can perform display data RAM read/write operation with no external operation clock to
minimize power consumption. In addition, because of the integrated power supply circuits necessary to drive liquid crystal,
it is possible to make a display system with fewer components.
2 Features
Single chip TFT-LCD Controller/Driver with RAM
Built-in Circuits
On-chip Display Data RAM (i.e. Frame Memory)
DC/DC converter
132 (H) x RGB x 162 (V) bits
Adjustable VCOM generation
Non-volatile (NV) memory to store initial register setting
LCD Driver Output Circuits:
Oscillator for display clock generation
Source Outputs: 132 RGB channels
Factory default value (module ID, module version, etc) are
Gate Outputs: 162 channels
stored in NV memory
Common electrode output
Timing controller
Display Colors (Color Mode)
Full Color: 262K, RGB=(666) max., Idle Mode OFF
Color Reduce: 8-color, RGB=(111), Idle Mode ON
Programmable Pixel Color Format (Color Depth) for
Various Display Data input Format
12-bit/pixel: RGB=(444) using the 384k-bit frame memory
and LUT
16-bit/pixel: RGB=(565) using the 384k-bit frame memory
and LUT
18-bit/pixel: RGB=(666) using the 384k-bit frame memory
and LUT
Various Interfaces
Parallel 8080-series MCU Interface
(8-bit, 9-bit, 16-bit & 18-bit)
Parallel 6800-series MCU Interface
(8-bit, 9-bit, 16-bit & 18-bit)
3-line serial interface
4-line serial interface
Built-in NV Memory for LCD Initial Register Setting
7-bits for ID2
8-bits for ID3
7-bits for VCOM adjustment
Wide Supply Voltage Range
I/O Voltage (VDDI to DGND): 1.65V~3.7V (VDDI ≤ VDD)
Analog Voltage (VDD to AGND): 2.3V~4.8V
On-Chip Power System
Source Voltage (GVDD to AGND): 3.0V~4.5V
VCOM level (VCOM to AGND): -0.4V to -2.0V
Gate driver HIGH level (VGH to AGND): +10.0V to +15V
Gate driver LOW level (VGL to AGND): -13V to -7.5V
Operating Temperature: -30°C to +85°C
Display Features
Support both normal-black & normal-white LC
Software programmable color depth mode
ST7735R
Parallel Interface: 8080,6800(8-bit/9-bit/16-bit/18-bit)
Serial Interface: 3-line, 4-line
Sitronix Technology Corp. reserves the right to change the contents in this document without prior notice.
V0.2
1 2009-8-5
Free Datasheet http://www.datasheet4u.net/
|
|
ST7735R
3 Pad arrangement
3.1 Output Bump Dimension
Boundary (Include scribe Lane)
CK
L
H
J
A
Item
Bump pitch
Bump width
Bump height
Bump gap1 (Vertical)
Bump gap2 (Horizontal)
Bump area
Chip Boundary (include scribe Lane)
Symbol
A
C
H
J
K
CxH
L
Size
16 um
16 um
98 um
19 um
16 um
1568 um2
59 um
V0.2
2 2009-08-05
Free Datasheet http://www.datasheet4u.net/
|
ST7735R
3.2 Input Bump Dimension
C2
C2
A1
A2 C1
H
K
K2
Item
Bump pitch 1
Bump pitch 2
Bump width 1
Bump width 2
Bump height
Bump gap
Bump gap1
Bump gap2
Bump area 1
Bump area 2
Chip Boundary(include scribe Lane)
K1
L
K1
Boundary (Include scribe Lane)
Symbol
A1
A2
C1
C2
H
K
K1
K2
C1 X H
C2 X H
L
Size
67 um
50 um
33 um
38 um
88 um
22 um
17 um
34 um
2904 um2
3344 um2
59 um
V0.2
3 2009-08-05
Free Datasheet http://www.datasheet4u.net/
|
|
@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact) |
