TDR. 115C120T Datasheet

115C120T TDR. Datasheet pdf. Equivalent

Part 115C120T
Description TDR
Feature Solving your relay requirements since 1922 Amperite Co. 567 52nd Street P.O. Box 329 West New York,.
Manufacture Amperite
Datasheet
Download 115C120T Datasheet

Solving your relay requirements since 1922 Amperite Co. 567 115C120T Datasheet
Recommendation Recommendation Datasheet 115C120T Datasheet





115C120T
Solving your relay requirements since 1922
Amperite Co.
567 52nd Street
P.O. Box 329
West New York, NJ 07093
(800) 752-2329
www.Amperite.com
G Series TDR
… Hermetically sealed
… Delay on Make or Delay on Break timing modes
… Thermal device
… 3 AMP rating
… 1 - 115V input voltage range - works on AC or DC
… Isolated output contacts
… Fixed delay times only
… Initial and reset (release) delay device
… Long life
… UL File #E96739 (M)
Timing Mode:
Timing cycle begins upon application of power to the heater terminals. At the end of the
initial delay time the relay contacts transfer and remain in a transferred state until input
power is removed. When the heater input power is removed, the contacts transfer back to
their original state at the end of a reset (release) delay period.
Timing Diagram:
Contact Information:
Arrangement: 1 form A (SPST - Normally open) - Delay on Make
1 form B (SPST - Normally closed) - Delay on Break
Contact Material: Silver - Cadmium Oxide
Rating (Resistive): 3A @ 115V AC
Expected Life @ 25°C: 500,000 operations minimum at rated loads
Environmental Information:
Temperature Range: Operating & storage: -55°C to +80°C, (-67°F to +176°F)
Mechanical Information:
Termination & Enclosure: Octal style, or 9-pin miniature style glass envelope. See
Diagram A & B.
Weight: 1 oz. (28g)
Outline Dimensions:



115C120T
Solving your relay requirements since 1922
Amperite Co.
567 52nd Street
P.O. Box 329
West New York, NJ 07093
(800) 752-2329
www.Amperite.com
Timing Specifications:
Timing - Fixed: 1 through 300 secs. - (octal style) or 1 - 120 secs. (9-pin miniature style)
Timing Tolerance: ±20% - Tighter tolerances are available.
Repeatability: ±5%
Release Time: Contact factory
Timing Cycle Interrupt Transfer: none
Initial Dielectric Strength:
1-10 Second Type: Between open contacts: 250V RMS; Between contacts & coil: 500V
RMS
15 - 300 Second Type: Between open contacts: 800V RMS; Between contacts & coil:
500V RMS
Input Information:
Voltage: AC or DC - 6V, 12V, 26V, 50V and 115V. Other voltages are available.
Power Requirement: 2.0 Watts approx.
Transient Protection: impervious to transients
Polarity Protection: None required
Input Voltages & Limits:
Nominal
6V AC/DC
12V AC/DC
26V AC/DC
50V AC/DC
Minimum Maximum
4V 8V
10V 14V
22V 30V
42 58V





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)