VOLTAGE SUPPRESSOR. SMDJ24A Datasheet

SMDJ24A SUPPRESSOR. Datasheet pdf. Equivalent

Part SMDJ24A
Description SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Feature MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656.
Manufacture MDE
Datasheet
Download SMDJ24A Datasheet

SMDJ Series TVS Diodes Surface Mount – 3000W > SMDJ series SMDJ24A Datasheet
SMDJ5.0 THRU SMDJ170CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPR SMDJ24A Datasheet
SMDJ5.0 thru SMDJ44 0CA SURFACE MOUNT TRANSIENT VOLTAGE SUPP SMDJ24A Datasheet
Transient Voltage Suppressors - SMDJ Series Features 1. Hal SMDJ24A Datasheet
Elektronische Bauelemente SMDJ Series Voltage 7.0V ~ 170V 3 SMDJ24A Datasheet
Surface Mount Transient Voltage Suppressors (TVS) SMDJ Serie SMDJ24A Datasheet
MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Q SMDJ24A Datasheet
UNISONIC TECHNOLOGIES CO., LTD SMDJ SURFACE MOUNT TRANSIENT SMDJ24A Datasheet
Production specification TRANSIENT VOLTAGE SUPPRESSOR SMDJ SMDJ24A Datasheet
Surface Mount Transient Voltage Suppressors (TVS) SMDJ Serie SMDJ24A Datasheet
Recommendation Recommendation Datasheet SMDJ24A Datasheet




SMDJ24A
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com
SMDJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-5.0 TO 170 Volts
3000 Watt Peak Pulse Power
FEATURES
• For surface mounted applications in order to
optimize board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• Repetition rate (duty cycle):0.01%
• Fast response time: typically less than
1.0 ps from 0 volts to BV for unidirectional types
• Typical IR less than 1µA above 10V
• High temperature soldering:
250°C/10 seconds at terminals
• Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O
MECHANICAL DATA
Case: JEDEC DO214AB. Molded plastic over glass
passivated junction
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bidirectional
Standard Packaging: 16mm tape (EIA STD RS-481)
Weight: 0.007 ounces, 0.21 grams)
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types SMDJ5.0 thru types SMDJ170 (e.g. SMDJ5.0C, SMDJ170CA)
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
SYMBOL
VALUE
Peak Pulse Power Dissipation on 10/1000 µs
waveform (NOTE 1, 2, Fig.1)
PPPM
Minimum 3000
Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3) IPPM SEE TABLE 1
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load, (JEDEC Method)(Note2, 3)
IFSM
300
Operatings and Storage Temperature Range
NOTES:
TJ, TSTG
-55 +150
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
UNITS
Watts
Amps
Amps
°C
Certified RoHS Compliant
UL File # E223026



SMDJ24A
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com
RATING AND CHARACTERISTIC CURVES SMDJ SERIES
Fig. 1 - Peak Pulse Power Rating Curve
100
Non-repetitive pulse
waveform shown in
Fig.3 TA = 25°C
10
1
0.1
0.1μs
1.0μs
10μs
100μs
td - Pulse Width (sec.)
1.0ms
10ms
100
87.5
75
62.5
50
37.5
25
12.5
0
0
Fig.2 - Pulse Derating Curve
25 50 75 100 125 150 175 200
TA - Ambient Temperature (°C)
Fig.3 - Pulse Waveform
150
tr = 10μsec.
TJ = 25°C
Pulse Width(td)is defined
Peak Value
as the point where the
100
IPPM
Half Value- IPPM
peak current decays to
50% of IPPM
2
50 10/1000μsec.Waveform
as defined by R.E.A.
td
0
0
1.0 2.03.0
t - Time(ms)
3.0 4.0
Fig. 5 - Steady State Power
Derating Curve
8.0
60Hz
7.0 Resistive or
Inductive Load
6.0
5.0
4.0
3.0
2.0
1.0
10000
1000
100
10
1
4.0
00
25 50 75 100 125 150 175 200
TL - Lead Temperature (°C)
10000
1000
Fig. 4 - Typical Junction Capacitance
Unidirectional
Bidirectional
VR = 0
100
10
5
VR = Rated
Stand-off
f = 1MHz
Vsig = 50mVp-p
TJ 25°C
1100 100
VWM - Reverse Stand-Off Voltage (V)
500
1000
Fig.6 - Maximum Non-Repetitive Forward
Surge Current Uni-Directional Only
300
8.3ms Single Half Sine-Wave
(JEDEC Method)TJ=TJ max.
250
200
150
100
1
10
Number of Cycles at 60 Hz
100





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)