LSI. MN63Y1208 Datasheet
Package Code No.
About this manual
These specifications provide important information for users of the MN63Y1208-E1, including an overview
and descriptions of functions.
■ Manual Configuration
Each section of this manual consists of a title, main text, and notes. The layout and definition of each section
are shown below.
This section describes the UART specification.
1.1.1 Communication Specifications
Table 1-1 shows the UART specification of this RFID.
Table 1-1 UART Communication Specification
Asynchronous, half-duplex (Only IRQ notification allows full-
1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400
Data (8 bits)
Start bit (1bit)
Parity bit (1bit, even)
Stop bit (1bit) See Note below.
No flow control signal (RTS/CTS)
Note: In order to ensure the timing margin, when sending consequtive data from the host, use a
2-bit stop bit or set the interval between stop bit and next start bit to 1 bit or more.
This is the Note.
■ Finding Desired Information
This manual provides two methods for finding desired information quickly and easily.
1. Consult the table of contents at the front of the manual to locate desired titles.
2. Chapter names are located at the top outer corner of each page, and section titles are located at the
bottom outer corner of each page.