Power Amplifier. MAAP-011146-STD Datasheet

MAAP-011146-STD Amplifier. Datasheet pdf. Equivalent

MAAP-011146-STD Datasheet
Recommendation MAAP-011146-STD Datasheet
Part MAAP-011146-STD
Description Power Amplifier
Feature MAAP-011146-STD; MAAP-011146-STD Power Amplifier, 2 W 21.15 - 23.65 GHz Features  24 dB Small Signal Gain  41 dBm T.
Manufacture MA-COM
Datasheet
Download MAAP-011146-STD Datasheet




MA-COM MAAP-011146-STD
MAAP-011146-STD
Power Amplifier, 2 W
21.15 - 23.65 GHz
Features
24 dB Small Signal Gain
41 dBm Third Order Intercept Point (OIP3)
>2 W Output P1dB
35 dBm Saturated Output Power
Integrated Power Detector
Bias 1330 mA @ 6 V
Lead-Free 7 mm Cavity Package
RoHS* Compliant
Description
The MAAP-011146-STD is a power amplifier
assembled in a 7 mm surface mount package with a
temperature compensated integrated power detector
operating from 21.15 to 23.65 GHz. The circuit
provides 24 dB gain, 41 dBm OIP3, 2 W P1dB and
35 dBm saturated output power.
The device includes ESD protection and by-pass
capacitors to ease the implementation and volume
assembly of the packaged part.
This power amplifier is specifically designed for use
in point-to-point radios for cellular backhaul
applications in the 23 GHz band.
Ordering Information1
Part Number
MAAP-011146-STD
MAAP-011146-STR500
Package
Bulk Quantity
500 piece reel
MAAP-011146-001SMB
Sample Board
1. Reference Application Note M513 for reel size information.
Functional Schematic
Rev. V2
Pin Configuration2
1 Ground 11 Ground
2
RF Input
12 RF Output
3
Ground
13 Power Detector
4
Ground
14 Reference
5
Gate 1 Bias
15
Ground
6
Gate 2 Bias
16 No Connection
7
Gate 3 Bias
17
Ground
8
Ground
18 Drain 2 Bias
9 Drain 3 Bias 19 Drain 1 Bias
10 Ground 20 Ground
213 Paddle
2. All “No Connection” pins should be grounded.
3. The exposed pad centered on the package bottom must be
connected to RF, DC and thermal ground.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support



MA-COM MAAP-011146-STD
MAAP-011146-STD
Power Amplifier, 2 W
21.15 - 23.65 GHz
Electrical Specifications: VDD = 6 V, IDQ4 = 1330 mA, TA = +25°C
Rev. V2
Small Signal Gain
PSAT
Output IP3, +20 dBm SCL
Output IP3, +24 dBm SCL
P1dB
Input Return Loss
Output Return Loss
Detector Vdiff, POUT= +20 dBm
Noise Figure
Gain Ripple over frequency
Gate Voltage
dB
dBm
dBm
dBm
dBm
dB
dB
V
dB
dB
V
21.7
34
39.25
37.25
0.5
24.0
35
41.00
39.00
34
15
10
1.1
6
2
28.3
1.7
-0.60
4. Adjust VG1, VG2 and VG3 between -1.2 and -0.6 V to achieve specified IDQ (IDQ = ID1+ID2+ID3). VG1, VG2 and VG3 are nominally the same
voltage.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support



MA-COM MAAP-011146-STD
MAAP-011146-STD
Power Amplifier, 2 W
21.15 - 23.65 GHz
Absolute Maximum Ratings5,6,7
Parameter
Rating
Input Power
18 dBm
Drain Voltage (VD1,2,3)
Gate Voltage (VG1,2,3)
Drain to Gate Voltage
(VD-VG)
Current (IDQ = ID1+ID2+ID3)
Detector Pin
7V
-3 V
10 V
2000 mA
6V
Detector Reference Pin
6V
Detector Pout
35 dBm
Junction Temperature
+175°C
Storage Temperature
-65°C to +150°C
5. Exceeding any one or combination of these limits may cause
permanent damage to this device.
6. MACOM does not recommend sustained operation near these
survivability limits.
7. Operating at nominal conditions with TJ ≤ +150°C will ensure
MTTF > 1 x 106 hours.
Rev. V2
Maximum Operating Ratings8,9
Parameter
Rating
PDISS
11.2 W
Junction Temperature
+150°C
Operating Temperature
-40°C to +85°C
8. Channel temperature directly affects device MTTF. Chanel
temperature should be kept as low as possible to maximize
lifetime. Thermal resistance, Θjc, is 5.8 °C/W.
9. For saturated performance, it is recommended that the sum
of (2VDD + abs (VGG)) < 15 V.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
These electronic devices are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these CDM class 2,
HBM class 1B devices.
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)