Absorptive Attenuator. MAAV-007091 Datasheet

MAAV-007091 Attenuator. Datasheet pdf. Equivalent

MAAV-007091 Datasheet
Recommendation MAAV-007091 Datasheet
Part MAAV-007091
Description Voltage Variable Absorptive Attenuator
Feature MAAV-007091; MAAV-007091 Voltage Variable Absorptive Attenuator, 1700 - 2200 MHz Rev. V3 Features  Input IP3:.
Manufacture MA-COM
Datasheet
Download MAAV-007091 Datasheet




MA-COM MAAV-007091
MAAV-007091
Voltage Variable Absorptive
Attenuator, 1700 - 2200 MHz
Rev. V3
Features
Input IP3: +31 dBm Min (Full Attenuation Range)
Input IP3 is 15 -20 dB Better than GaAs
Linear Operation: +20 dBm Typ.
Plastic, 28 Lead, 6 mm CSP, SMT Package
35 dB Dynamic Range (With 30 mA Bias Current)
Single Control Voltage
50 ohm Impedance
Linear Driver, MADR-007098-000100, Available
Test Boards are Available
Tape and Reel Packaging Available
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of MAAVCC0002
Functional Schematic
Description
M/A-COM's MAAV-007091-000100 is a PIN diode
based voltage variable attenuator. This device is in a
6mm square, 28 lead, plastic CSP package, suitable
for surface mounting on PCBs. These attenuators
have linear operating power and input intercept point
levels 15 - 20 dB better than GaAs FET MMIC
voltage variable attenuators. They are ideally suited
for use where low distortion, high linear operating
power and high dynamic range are required. These
devices are optimized for the PCS and UMTS
frequency bands, but exhibit excellent performance
and repeatability over the entire specified frequency
band. The MAAV-007091-000100 is ideally suited
for wireless communications systems.
Pin Configuration2,3
Pin #
1
2
3
4
5
Function
NC
NC
NC
NC
NC
Pin #
15
16
17
18
19
Function
NC
NC
NC
NC
NC
6 NC 20 NC
7 NC 21 NC
Ordering Information
Part Number
MAAV-007091-000100
MAAV-007091-0001TR
MAAV-007091-0001TB
Package
Bulk Packaging
1000 piece reel
Sample Test Board
8 NC 22
9
BIAS 1
23
10 NC 24
11 NC 25
12 GND 26
13 RFOUT 27
14 GND 28
NC
BIAS 1
NC
NC
GND
RFIN
GND
Note: Reference Application Note M513 for reel size
information.
* Restrictions on Hazardous Substances, European Union
Directive 2002/95/EC.
1
1. Bias current may be applied to Pin 9 or 23. However, the
unused pin must be isolated.
2. The exposed pad centered on the package bottom must be
connected to RF and DC ground. (For PQFN packages)
3. It is preferable to ground all “NC” pins, except for the unused
bias pin, which must be left open.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support



MA-COM MAAV-007091
MAAV-007091
Voltage Variable Absorptive
Attenuator, 1700 - 2200 MHz
Electrical Specifications: TA = 25°C
Parameter
Insertion Loss
Attenuation
(Above Loss)
Attenuation
Flatness
VSWR
Switching Speed
Linear Operation
Input IP3
P1 dB
I Control
Test Conditions
0 volts
10 mA bias current
0 to 30 dB attenuation
0 to 30 dB attenuation
50% Control to 90%/10% RF
Two-tone inputs up to +10 dBm
Full Attenuation Range
Frequency
1700-2200 MHz
1700-2200 MHz
1700-2200 MHz
1700-2200 MHz
1700-2200 MHz
1700-2200 MHz
1700-2200 MHz
1700-2200 MHz
1700-2200 MHz
Units
dB
dB
dB
Ratio
µs
dBm
dBm
dBm
mA
Min.
30
+31
Typ.
2.9
33
1.0
2:1
+20
-
+23
-
Absolute Maximum Ratings 4
Parameter
Max. Input Power
1700 - 2200 MHz
Operating Temperature
Storage Temperature
Absolute Maximum
+27 dBm
-40°C to +85°C
-65°C to +125°C
4. Exceeding any one or combination of these limits may
cause permanent damage to this device.
Recommended PCB Layout
Rev. V3
Max.
4.0
2.0
2.2:1
3.0
30
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support



MA-COM MAAV-007091
MAAV-007091
Voltage Variable Absorptive
Attenuator, 1700 - 2200 MHz
Rev. V3
Typical Performance Curves
Insertion Loss
- 4 0 °C
4.0
3.5
3.0
2.5
2.0
1.5
1700
1750
2 5 °C
1800 1850 1900
Frequency (MHz)
8 5 °C
1950 2000
Typical Performance Curves (beyond 2GHz)
Insertion Loss @ 25°C
3.9
3.7
3.5
3.3
3.1
2.9
2.7
2.5
2000
2050
2100
2150
Fre que ncy (MHz )
2200
Attenuation Flatness @ +25°C
5 dB
10 d B
20 dB 30 dB
1.0
0 .8
0 .6
0 .4
0 .2
0 .0
- 0 .2
- 0 .4
- 0 .6
- 0 .8
-1.0
170 0
1750
18 0 0
1850 1900
1950 2000
Fre que ncy (MHz )
Attenuation Flatness @ 25°C
30 dB
0.4
20 dB
10 d B
5 dB
0.2
0
-0.2
-0.4
-0.6
-0.8
-1
-1.2
-1.4
2000
2050
2100
2150
Fre que ncy (MHz )
2200
Typical VSWR @ +25°C
Typical VSWR @ +25°C
R ef
30 dB
15 d B
1.8
Lo ss
2.2
5 dB
10 d B
30 dB
2
1.6
1.8
1.4 1.6
1.4
1.2
1.2
1
1700 1750 1800 1850 1900 1950 2000
Frequency (MHz)
3
1
2000 2050 2100 2150 2200
Frequency (MHz)
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)