BRIDGE RECTIFIER. RS601 Datasheet

RS601 RECTIFIER. Datasheet pdf. Equivalent

Part RS601
Description SINGLE-PHASE BRIDGE RECTIFIER
Feature MOSPEC SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 6.0 Ampere FEATURES.
Manufacture MOSPEC
Datasheet
Download RS601 Datasheet




RS601
MOSPEC
SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
6.0 Ampere
FEATURES
Low cost
High forward surge current capability
Ideal for printed circuit board
High temperature soldering guaranteed:
260oc/10 second,0.375”(9.5mm)lead length
at 5 lbs. (2.3kg) tension.
MECHANICAL DATA
Case: Transfer molded plastic
Epoxy: UL94V-O rate flame retardant
Terminals Lead Solderable Per MIL-STD-202
method 208C
Polarity Polarity symbols marked on case
Mounting :Thru hole for #6 screw, 5 in,-lbs.Torqute Max.
Weight 0.27 ounce, 7.59 gram
RS601 THRU RS607
MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS
* Rating at 25 ambient temperature unless otherwise specified
* Single phase,half wave. 60Hz, resistive or inductive load.
* For capacitive load derate current by 20 %
Characteristic
Symbol RS601 RS602 RS603 RS604 RS605 RS606 RS607
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VDC
50
100 200 400 600 800 1000
V
RMS Reverse Voltage
VR(RMS)
Average Rectifier Forward TC=100
Current at
TA=40 (Note 3)
Non-Repetitive Peak Surge Current
8.3 ms Single half sine-wave superimposed on
rated load
Forward Voltage (per element) ( IF =6.0 Amp)
IO(AV)
IFSM
VFM
Peak Reverse Current at rated
DC blocking voltage per element
I2 t Rating for Fusing( t<8.3ms)
TA = 25
TA = 100
Typical Junction Capacitance per element
(Note1)
IR
I2t
CJ
Typical Thermal Resistance (per leg)(note 2)
Operating and Storage Temperature Range
Rθ jc
TJ , Tstg
35
70 140 280 420 560 700
6.0
6.0
150
V
A
A
1.0
10
1.0
93
105
4.7
-65 to +150
V
uA
mA
A2s
pF
oC/W
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Unit mounted on 2.6”×1.4”×0.06” thick (6.3×3.5×0.15 cm ) Al. plate.
3. Unit mounted in free air, no heatsink, P.C.B. at 375”(9.5mm) lead length with. 5”×5”(12×12 mm) copper pads..



RS601
RS601 THRU RS607
FIG-1 FORWARD CURRENT DERATING CURVE
Single phase
Half Wave 60 Hz
Resistive or
Inducttive Load
TC
Heat Sink
Mounting
2.6”×2.6”×0.06”
(6.5×6.5×0.15 cm
AL Plate
Ambient
Temperature
TA
P.C.B Mounting
0.47”×0.47” (12×12 mm)
Copper Pads
0.375”(9.5mm) Lead Length
CASE TEMPERATURE ( )
FIG-3 PEAK FORWARD SURGE CURRENT
TJ=25OC
Single Half
Sine Wave
(JEDEC Method)
FIG-2 TYPICAL FORWARD CHARACTERISITICS
TJ=25OC
Pulse Width=300us
1% Duty Cycle
FORWARD VOLTAGE (Volts)
FIG-4 TYPICAL JUNCTION CAPACITANCE
TJ=25OC
f=1MHz
NUMBER OF CYCLES AT 60 Hz
REVERSE VOLTAGE (Volts)
FIG-5 TYPICAL REVERSE CHARACTERISTICS
TJ=100OC
TJ=25OC
PERCENT OF RATED REVERSE VOLTAGE ( )







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)