Regulator Controller. APL5610 Datasheet

APL5610 Controller. Datasheet pdf. Equivalent

Part APL5610
Description Low Dropout Linear Regulator Controller
Feature APL5610/A Low Dropout Linear Regulator Controller Features General Description • Wide Supply Vol.
Manufacture ANPEC
Datasheet
Download APL5610 Datasheet



APL5610
APL5610/A
Low Dropout Linear Regulator Controller
Features
General Description
Wide Supply Voltage Range from 4.5 to 13.5V
The APL5610/A is a low dropout linear regulator controller.
High Output Accuracy Over Operating Temperature The APL5610/A could drive an external N-Channel
and Loading Ranges
MOSFET and provides an adjustable output by using an
Fast Transient Response
external resistive divider.
Power-On-Reset Monitoring on VCC
Internal Soft-Start Function
Low Shutdown Current: < 5µA
The APL5610/A integrates various functions. For example,
a Power-On-Reset (POR) circuit monitors VCC supply
voltage to prevent wrong operations; the function of Un-
der-Voltage Protection (UVP) protects the device from short
Enable Control Function
circuit condition. A POK indicates that the output status
Under-Voltage Protection
with time delay which is set internally. It can control other
Power-OK Output with a Delay Time
converter for power sequence. Moreover, the APL5610/A
Two Versions of IC Available:
can be enabled by other power system; namely, holding
- APL5610: UVP Activated after V is Ready
OUT
- APL5610A: UVP Activated after VCC is Supplied
SOT-23-6 Package
the EN above 1.6V enables output and pulling the EN
under 0.4 disables output.
The APL5610/A is available in SOT-23-6 package.
Lead Free and Green Devices Available
(RoHS Compliant)
Simplified Application Circuit
Applications
Note Book PC Applications
Motherboard Applications
Pin Configuration
APL5610/A
EN 1
GND 2
FB 3
6 VCC
5 DRV
4 POK
SOT-23-6
(Top View)
ON
EN
OFF
POK
-
VCC
EN DRV
APL5610
APL5610A
POK
FB
GND
VCC
VIN
VOUT
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and
advise customers to obtain the latest version of relevant information to verify before placing orders.
Copyright © ANPEC Electronics Corp.
Rev. A.4 - Sep., 2009
1
www.anpec.com.tw



APL5610
APL5610/A
Ordering and Marking Information
APL5610
APL5610A
Assembly Material
Handling Code
Temperature Range
Package Code
Package Code
C : SOT-23-6
Operating Ambient Temperature Range
I : -40 to 85 oC
Handling Code
TR : Tape & Reel
Assembly Material
G : Halogen and Lead Free Device
APL5610 C:
L10X
X - Date Code
APL5610A C:
LA0X
X - Date Code
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
Absolute Maximum Ratings (Note 1 )
Symbol
Parameter
Rating
Unit
VCC VCC Input Voltage (VCC to GND)
EN, POK, to GND Voltage
-0.3 to 15
-0.3 to 7
V
V
VFB
VDRV
TJ
TSTG
TSDR
FB to GND Voltage
DRV to GND Voltage
Maximum Junction Temperature
Storage Temperature
Maximum Lead Soldering Temperature, 10 Seconds
-0.3 to 7
-0.3 to VCC+0.3
150
-65 to 150
260
V
V
oC
oC
oC
Note 1: Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Thermal Characteristic
Symbol
θJA
Parameter
Junction-to-Ambient Resistance in Free Air (Note 2)
SOT-23-6
Typical Value
250
Note 2: θJA is measured with the component mounted on a high effective thermal conductivity test board in free air.
Unit
oC/W
Recommended Operating Conditions (Note 3)
Symbol
Parameter
Range
Unit
VCC
VEN
VOUT
TA
TJ
VCC Input Voltage (VCC to GND)
EN to GND Voltage
VOUT Output Voltage (Note4)
Ambient Temperature
Junction Temperature
4.5 to 13.5
0 to 5.5
0.8 ~ VIN - VDROP
-40 to 85
-40 to 125
V
V
V
oC
oC
Note 3: Refer to the typical application circuit.
Note 4: VDROP defined as the VIN -VOUT voltage at VOUT = 98% normal VOUT. The linear regulator must provide the output MOSFET with
sufficient Gate-to-Source voltage (VGS = VCC - VOUT) to regulate the output voltage.
Copyright © ANPEC Electronics Corp.
Rev. A.4 - Sep., 2009
2
www.anpec.com.tw







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)