PWM Controller. APW7098 Datasheet

APW7098 Controller. Datasheet pdf. Equivalent

Part APW7098
Description Two- Phase Buck PWM Controller
Feature APW7098 Two- Phase Buck PWM Controller with Integrated MOSFET Drivers Features General Description.
Manufacture ANPEC
Datasheet
Download APW7098 Datasheet




APW7098
APW7098
Two- Phase Buck PWM Controller with Integrated MOSFET Drivers
Features
General Description
Voltage-Mode Operation with Current Sharing
- Adjustable Feedback Compensation
- Fast Load Transient Response
Operate with 8V~13.2V Supply Voltage
CC
Selectable External or Internal 0.6V Reference
- ±1.5% Accuracy Over Temperature
Support Single- and Two-Phase Operations
5VCC and Buffered Reference Outputs
8~12V Gate Drivers with Internal Bootstrap
Diode
Lossless Inductor DCR Current Sensing
Selectable Operation Frequency
- 150k/300k/400kHz per Phase
Power-OK Indicator Output
- Regulated 1.5V on REFOUT/POK
Adjustable Over-Current Protection (OCP)
Accurate Load Line (DROOP) Programming
Adjustable Soft-Start
Over-Voltage Protection (OVP)
Under-Voltage Protection (UVP)
Over-Temperature Protection (OTP)
QFN4x4 24-Lead Package (QFN4x4-24A)
Lead Free and Green Devices Available
(RoHS Compliant)
Simplified Application Circuit
VIN1
REFIN/EN
REFOUT/POK
APW7098
COMP
FB
VIN2
VOUT
The APW7098, two-phase PWM control IC, provides a
precision voltage regulation system for advanced graphic
microprocessors in graphics card applications. The
integration of power MOSFET drivers into the controller
IC and reduces the number of external parts for a cost
and space saving power management solution.
The APW7098 uses a voltage-mode PWM architecture,
operating with fixed-frequency, to provides excellent load
transient response. The device uses the voltage across
the DCRs of the inductors for current sensing. Load line
voltage positioning (DROOP), channel-current balance,
and over-current protection are accomplished through
continuous inductor DCR current sensing.
The MODE pin programs single- or two- phase operation.
When IC operates in two-phase mode normally, it can
transfer two-phase mode to single-phase mode at liberty.
Nevertheless, once operates in single-phase mode, the
operation mode is latched. It is required to toggle SS,
REFIN/EN or 5VCC pin to reset the IC. Such feature of the
MODE pin makes the APW7098 ideally suitable for dual
power input applications, such as PCIE interfaced graphic
cards.
This control IC‘s protection features include a set of
sophisticated over-temperature, over-voltage, under-
voltage, and over-current protections. Over-voltage re-
sults in the converter turning the lower MOSFETs on to
clamp the rising output voltage and protects the
microprocessor. The over-current protection level is set
through external resistors. The device also provides a
power-on-reset function and a programmable soft-start
to prevent wrong operation and limit the input surge
current during power-on or start-up.
The APW7098 is available in a QFN4x4-24A package.
Applications
Graphics Card GPU Core Power Supply
Motherboard Chipset or DDR SDRAM Core Power
Supply
On-board High Power PWM Converter with Out-
put Current up to 60A
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and
advise customers to obtain the latest version of relevant information to verify before placing orders.
Copyright © ANPEC Electronics Corp.
Rev. A.7 - Oct., 2011
1
www.anpec.com.tw



APW7098
APW7098
Ordering and Marking Information
APW7098
Assembly Material
Handling Code
Temperature Range
Package Code
Package Code
QA : QFN4x4-24A
Operating Ambient Temperature Range
E : -20 to 70 oC
Handling Code
TR : Tape & Reel
Assembly Material
G : Halogen and Lead Free Device
APW7098 QA :
APW7098
XXXXX
XXXXX - Date Code
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
Pin Configuration
24 23 22 21 20 19
UGATE1 1
BOOT1 2
18 UGATE2
17 BOOT2
5VCC 3
AGND 4
25
PGND
16 REFOUT/POK
15 REFIN/EN
MODE 5
14 SS
CSP1 6
13 FB
7 8 9 10 11 12
QFN4x4-24A
(Top View)
Absolute Maximum Ratings (Note 1)
Symbol
VCC
VBOOT1/2
Parameter
VCC Supply Voltage (VCC to AGND)
BOOT1/2 Voltage (BOOT1/2 to PHASE1/2)
UGATE1/2 Voltage (UGATE1/2 to PHASE1/2)
<200ns pulse width
>200ns pulse width
LGATE1/2 Voltage (LGATE1/2 to PGND)
<200ns pulse width
>200ns pulse width
PHASE1/2 Voltage (PHASE1/2 to PGND)
<200ns pulse width
>200ns pulse width
Rating
-0.3 ~ 15
-0.3 ~ 15
-5 ~ VBOOT1/2+5
-0.3 ~ VBOOT1/2+0.3
-5 ~ VCC+5
-0.3 ~ VCC+0.3
-10 ~ 30
-2 ~ 15
Unit
V
V
V
V
V
Copyright © ANPEC Electronics Corp.
Rev. A.7 - Oct., 2011
2
www.anpec.com.tw







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)