Transmit Module. RF5216 Datasheet

RF5216 Module. Datasheet pdf. Equivalent

Part RF5216
Description Linear EDGE Transmit Module
Feature RF5216 Quad-Band GSM, Linear EDGE Transmit Module with Fourteen High Linearity TRX Switch Ports The .
Manufacture RFMD
Datasheet
Download RF5216 Datasheet

RF5216 Quad-Band GSM, Linear EDGE Transmit Module with Fourt RF5216 Datasheet
Recommendation Recommendation Datasheet RF5216 Datasheet




RF5216
RF5216
Quad-Band GSM, Linear EDGE Transmit Module with
Fourteen High Linearity TRX Switch Ports
The RF5216 is a quad-band GSM/GPRS, linear EDGE transmit
module with fourteen transmit and receive RF switch ports using a
MIPI RFFE interface for PA and switch controls. The power
amplifier supports GSM and EDGE Class 12 transmit in the
GSM850, GSM900, DCS1800, and PCS1900 bands. The fourteen
switch ports are UMTS and LTE transmit and receive capable and
may be used for GSM and EDGE receive ports.
GND 1
RFIN_L 2
RFIN_H 3
GND 4
SCLK 5
SDATA 6
VIO 7
VRAMP 8
VCC/VPA 9
VBAT/VSW 10
GND 11
Power Amplifier
And
PA Bias, Mode,
Switch Control
With
MIPI RFFE
30 TRX8
29 TRX9
28 TRX10
27 TRX11
26 TRX12
25 TRX13
24 TRX14
23 GND
22 ANT
21 GND
20 GND
RF5216
Package: Module, 38-pin,
5.30mm x 5.50mm x 0.78mm
Features
GSM and Linear EDGE Transmit
Fourteen High Linearity TRX Ports
MIPI RFFE Digital Control
Low RF Switch Port Loss
Few External Components
Required
8kV ESD Protection in a Handset
Application
-1dBm to 6dBm Drive Level
Applications
WEDGE Handsets and Connected
Devices
GSM and Linear EDGE Uplink
Plus Multiband 3G and 4G
Functional Block Diagram
Ordering Information
RF5216PCK-410
Evaluation Board Sample Kit
RF5216SB
Sample bag with 5 pieces
RF5216TR7
7" Reel with 750 pieces
RF5216TR13-5K
13" Reel with 5000 pieces
RF5216DK
Design Kit, RF5216PCK-410+ RD2000 Communication Board
Basic MIPI RFFE Registers
MIPI
Location
Reg. 1D
Reg. 1E
Reg. 1F
Bit
Name
Product_ID [7:0]
Mfr_ID [7:0]
USID [3:0]
Default
Value (hex)
DD
34
F
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS20151001
RF MICRO DEVICES® and RFMD® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 22



RF5216
Absolute Maximum Ratings
Parameter
Supply Voltage (VCC, VBATT)
Control Voltage (VRAMP)
Digital control signals, SCLK, SDATA, VIO
RF Input Power for 2G PA
RF Input Power for all TRX Ports
Transmit Duty Cycle, Period = 4.6ms
Output Load VSWR
Operating Temperature Range
Storage Temperature Range
ESD Rating – Human Body Model (HBM, JESD22-A114)
ESD Rating – Charged Device Model (CDM, JESD22-C101C)
Moisture Sensitivity Level
Rating
-1.2 to 6.0
-0.3 to 3.0
2.0
10
31
50
20:1
-30 to +85
-55 to +150
1000
500
MSL3
Unit
V
V
V
dBm
dBm
%
°C
°C
V
V
Caution! ESD sensitive device.
RFMD Green: RoHS status based on EU
Directive 2011/65/EU (at time of this
document revision), halogen free per IEC
61249-2-21, < 1000ppm each of
antimony trioxide in polymeric materials
and red phosphorus as a flame retardant,
and <2% antimony in solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Performance Specifications
Parameter
Specification
Min Typ Max
Unit Condition
General Requirements
TA = 25°C, unless otherwise specified
Operating Ambient Temperature (TA)
-30
25
85 °C
Supply Voltage, VCC
3.0 3.5 4.6 V Normal operating range
Supply Voltage, VBATT
2.8 3.5 4.6 V Normal operating range
Supply Leakage Current
10 µA
VRAMP Voltage
0.16
V GSM transmit; minimum RF output power
1.8 V GSM transmit; maximum RF output power
1.65
1.8 V EDGE transmit
VRAMP Capacitance
10 pF DC to 200kHz
VRAMP Current
10 µA
Supply Voltage, VIO
1.65 1.8 2.0 V MIPI RFFE supply voltage
MIPI RFFE logic low (SCLK, SDATA)
0
0.3*VIO V
MIPI RFFE logic high (SCLK, SDATA) 0.7*VIO
VIO V
VIO Rise Time
450 µs Required for device reset
Control Current (MIPI Digital Inputs)
50 µA
Turn-on Time
20 µs From application of VBATT and VIO
Switching Speed
2 5 µs Port to Port
RF Port Impedance
50 Ω Pins 2, 3, 17, 22, 24 to 37
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS20151001
RF MICRO DEVICES® and RFMD® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
2 of 22





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)