Silicon Transistors. 2N3902 Datasheet

2N3902 Transistors. Datasheet pdf. Equivalent

2N3902 Datasheet
Recommendation 2N3902 Datasheet
Part 2N3902
Description NPN High Power Silicon Transistors
Feature 2N3902; 2N3902 & 2N5157 NPN High Power Silicon Transistors Features  Available in JAN, JANTX, JANTXV per MI.
Manufacture MA-COM
Datasheet
Download 2N3902 Datasheet




MA-COM 2N3902
2N3902 & 2N5157
NPN High Power Silicon Transistors
Features
Available in JAN, JANTX, JANTXV per
MIL-PRF-19500/371
TO-3 (TO-204AA) Package
Rev. V1
Electrical Characteristics
Parameter
Test Conditions
Symbol Units
Off Characteristics
Collector - Emitter Cutoff Current
VCE = 400 Vdc, 2N3902
VCE = 500 Vdc, 2N5157
ICEO µAdc
Collector - Emitter Cutoff Current
Collector - Emitter Cutoff Current
On Characteristics1
Forward Current Transfer Ratio
Collector - Emitter Saturation Voltage
Base - Emitter Saturation Voltage
Dynamic Characteristics
Small-Signal Short-Circuit Forward Current
Transfer Ratio
VBE = 1.5 Vdc, VCE = 700 Vdc
VBE = 5 Vdc, 2N3902
VBE = 6 Vdc, 2N5157
IC = 0.5 Adc, VCE = 5 Vdc
IC = 1.0 Adc, VCE = 5 Vdc
IC = 2.5 Adc, VCE = 5 Vdc
IC = 3.5 Adc, VCE = 5 Vdc
IC = 1.0 Adc, IB = 0.1 Adc
IC = 3.5 Adc, IB = 0.7 Adc
IC = 1.0 Adc, IB = 0.1 Adc
IC = 3.5 Adc, IB = 0.7 Adc
ICEX µAdc
IEBO µAdc
HFE -
VCE(SAT) Vdc
VCE(SAT) Vdc
IC = 0.2 Adc, VCE = 10 Vdc, f = 1 MHz | HFE | -
Output Capacitance
VCB = 10 Vdc, IE = 0, 100 kHz ≤ f ≤ 1 MHz COBO pF
Min.
25
30
10
5
2.5
Max.
100
100
20
200
200
90
0.8
2.5
1.5
2.0
25
250
1. Pulse Test: Pulse Width = 300 μs, Duty Cycle ≤2.0%.
(Continued next page)
1
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support



MA-COM 2N3902
2N3902 & 2N5157
NPN High Power Silicon Transistors
Rev. V1
Electrical Characteristics
Parameter
Switching Characteristics
Turn-On Time
Turn-Off Time
Safe Operating Area
Test Conditions
Symbol Units Min.
Max.
VCC = 125 Vdc; IC = 1.0 Adc;
IB1 = 0.1 Adc
VCC = 125 Vdc; IC = 1.0 Adc;
IB1 = 0.1 Adc, -IB2 = 0.50 Adc
TON µs
TOFF
µs
0.8
1.7
DC Tests:
Test 1:
Test 2:
Test 3:
TC = +25°C, I Cycle, t = 1.0 s (see Fig. 3 of MIL-PRF-19500/371)
VCE = 28.6 Vdc, IC = 3.5 Adc
VCE = 70 Vdc, IC = 1.43 Adc
VCE = 325 Vdc, IC = 55 mAdc, 2N3902
VCE = 400 Vdc, IC = 35 mAdc, 2N5157
Switching Tests:
Load Condition C (unclamped inductive load): TC = +25°C, duty cycle <10%; RS = 0.1 Ω (See Fig. 4 of MIL-PRF-19500/371)
Test 1:
tP = approximately 3 ms (vary to obtain IC), RBB1 = 20 Ω, VBB1 = 10 Vdc; RBB2 = 3 kΩ,
VBB2 = 1.5 Vdc, VCC = 50 Vdc, lC = 3.5 Adc, L = 60 mH, R = 3 Ω; RL <14 Ω
Test 2:
tP = approximately 3 ms (vary to obtain IC), RBB1 = 100 Ω, VBB1 = 10 Vdc; RBB2 = 3 kΩ,
VBB2 = 1.5 Vdc, lC = 0.6 Adc, VCC = 50 Vdc, L = 200 mH, R = 8 Ω; RL <83 Ω
Load Condition (clamped inductive load): TC = +25°C, duty cycle <10% (See Fig. 5 of MIL-PRF-19500/371)
Test 1:
tP = approximately 30 ms (vary to obtain IC), RS = 0.1 Ω, RBB1 = 20 Ω, VBB1 = 10 Vdc;
RBB2 = 100 Ω, VBB2 = 1.5 Vdc, VCC = 50 Vdc, lC = 3.5 Adc, L = 60 mH, R = 3 Ω; RL <0 Ω
(A suitable clamping circuit or diode can be used.)
Clamp Voltage = 400 +0, -5 Vdc 2N3902
Clamp Voltage = 500 +0, -5 Vdc 2N5157
(Clamped voltage must be reached)
2
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support



MA-COM 2N3902
2N3902 & 2N5157
NPN High Power Silicon Transistors
Absolute Maximum Ratings
Ratings
Collector - Emitter Voltage
2N3902
2N5157
Emitter - Base Voltage
2N3902
2N5157
Collector - Base Voltage
Base Current
Collector Current
Total Power Dissipation
@ TA = +25°C2
@ TA = +25°C3
Operating & Storage Temperature Range
2. Derate linearly @ 28.57 mW / °C for TA >+25°C.
3. Derate linearly @ 0.8 mW / °C for TA >+75°C.
Thermal Characteristics
Characteristics
Thermal Resistance, Junction to Case
Outline Drawing
Symbol
VCEO
VEBO
VCBO
IB
IC
PT
TOP, TSTG
Symbol
RθJC
Value
400 Vdc
500 Vdc
5 Vdc
6 Vdc
700 Vdc
2.0 Adc
3.5 Adc
5W
100 W
-65°C to +200°C
Rev. V1
Max. Value
1.25°C/W
Notes:
Dimensions in inches [mm]
Standard header type solid base.
Standard lead finish: per MIL-M-38510 type x or equivalent.
Lead not bent >15°
Dimensions based on JEDEC standard TO-3 publication 95, PA
3
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)