Audio Amplifier. SSM2537 Datasheet

SSM2537 Amplifier. Datasheet pdf. Equivalent

SSM2537 Datasheet
Recommendation SSM2537 Datasheet
Part SSM2537
Description Mono 2.7 W Class-D Audio Amplifier
Feature SSM2537; Data Sheet PDM Digital Input, Mono 2.7 W Class-D Audio Amplifier SSM2537 FEATURES architecture en.
Manufacture Analog Devices
Datasheet
Download SSM2537 Datasheet




Analog Devices SSM2537
Data Sheet
PDM Digital Input, Mono
2.7 W Class-D Audio Amplifier
SSM2537
FEATURES
architecture enables extremely low real-world power consumption
Filterless digital Class-D amplifier
Pulse density modulation (PDM) digital input interface
2.7 W into 4 Ω load and 1.4 W into 8 Ω load at 5.0 V supply
with <1% total harmonic distortion plus noise (THD + N)
Available in 9-ball, 1.2 mm × 1.2 mm, 0.4 mm pitch WLCSP
93% efficiency into 8 Ω at full scale
Output noise: 25 µV rms at 3.6 V, A-weighted
from digital audio sources with excellent audio performance. Using
the SSM2537, audio can be transmitted digitally to the audio
amplifier, significantly reducing the effect of noise sources such
as GSM interference or other digital signals on the transmitted
audio. The SSM2537 is capable of delivering 2.7 W of continu-
ous output power with <1% THD + N driving a 4 Ω load from a
5.0 V supply.
THD + N: 0.005% at 1 kHz, 100 mW output power
The SSM2537 features a high efficiency, low noise modulation
PSRR: 80 dB at 217 Hz, with dither input
scheme that requires no external LC output filters. The closed-loop,
Quiescent power consumption: 5.1 mW
three-level modulator design retains the benefits of an all-digital
(VDD = 1.8 V, PVDD = 3.6 V, 8 Ω + 33 µH load)
Pop-and-click suppression
Configurable with PDM pattern inputs
Short-circuit and thermal protection with autorecovery
Smart power-down when PDM stop condition or no clock
input detected
64 × fS or 128 × fS operation supporting 3 MHz and 6 MHz clocks
DC blocking high-pass filter and static input dc protection
User-selectable ultralow EMI emissions and low latency modes
Power-on reset (POR)
Minimal external passive components
APPLICATIONS
amplifier, yet enables very good PSRR and audio performance. The
modulation continues to provide high efficiency even at low output
power and has an SNR of 102 dB PDM input. Spread-spectrum
pulse density modulation is used to provide lower EMI-radiated
emissions compared with other Class-D architectures.
The SSM2537 has a four-state gain and sample frequency selection
pin that can select two different gain settings, optimized for 3.6 V
and 5 V operation. This same pin controls the internal digital fil-
tering and clocking, which can be set for a 64 × fS or 128 × fS input
sample rate to support both 3 MHz and 6 MHz PDM clock rates.
The SSM2537 has a micropower shutdown mode with a typical
shutdown current of 1.6 µA for both power supplies. Shutdown is
Mobile handsets
enabled automatically by gating input clock and data signals. A
GENERAL DESCRIPTION
The SSM2537 is a PDM digital input Class-D power amplifier
that offers higher performance than existing DAC plus Class-D
solutions. The SSM2537 is ideal for power sensitive applications
where system noise can corrupt the small analog signal sent to
the amplifier, such as mobile phones and portable media players.
The SSM2537 combines an audio digital-to-analog converter
(DAC), a power amplifier, and a PDM digital interface on a single
chip. The integrated DAC plus analog sigma-delta (Σ-Δ) modulator
standby mode can be entered by applying a designated PDM stop
condition sequence. The device also includes pop-and-click sup-
pression circuitry. This suppression circuitry minimizes voltage
glitches at the output when entering or leaving the low power
state, reducing audible noises on activation and deactivation.
The SSM2537 is specified over the industrial temperature range
of −40°C to +85°C. It has built-in thermal shutdown and output
short-circuit protection. It is available in a 9-ball, 1.2 mm ×
1.2 mm wafer level chip scale package (WLCSP).
FUNCTIONAL BLOCK DIAGRAM
VDD
PVDD PGND
PDAT
PCLK
POWER-ON
RESET
CLOCKING POWER
CONTROL
INPUT
INTERFACE
FILTERING/
DAC
Σ-Δ
CLASS-D
MODULATOR
SSM2537
FULL-BRIDGE
POWER STAGE
OUT+
OUT–
GAIN_FS
Figure 1.
LRSEL
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2012 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com



Analog Devices SSM2537
SSM2537* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
DOCUMENTATION
Data Sheet
SSM2537: PDM Digital Input, Mono 2.7 W Class-D Audio
Amplifier Data Sheet
DESIGN RESOURCES
SSM2537 Material Declaration
PCN-PDN Information
Quality And Reliability
Symbols and Footprints
DISCUSSIONS
View all SSM2537 EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.



Analog Devices SSM2537
SSM2537
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
General Description ......................................................................... 1
Functional Block Diagram .............................................................. 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Digital Input/Output Specifications........................................... 4
PDM Interface Digital Timing Specifications .......................... 5
Absolute Maximum Ratings............................................................ 6
Thermal Resistance ...................................................................... 6
ESD Caution.................................................................................. 6
Pin Configuration and Function Descriptions............................. 7
Typical Performance Characteristics ............................................. 8
Theory of Operation ...................................................................... 13
REVISION HISTORY
10/12—Revision 0: Initial Version
Data Sheet
Master Clock............................................................................... 13
Power Supplies ............................................................................ 13
Power Control............................................................................. 13
Power-On Reset/Voltage Supervisor ....................................... 13
System Gain/Input Frequency .................................................. 13
PDM Pattern Control ................................................................ 14
EMI Noise.................................................................................... 14
PDM Channel Selection ............................................................ 14
Output Modulation Description .............................................. 14
Applications Information .............................................................. 15
Layout .......................................................................................... 15
Power Supply Decoupling ......................................................... 15
Outline Dimensions ....................................................................... 16
Ordering Guide .......................................................................... 16
Rev. 0 | Page 2 of 16







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)