No change on display and in operation under the following test condition.
Unless otherwise specified, tests will be conducted under the following condition.
Humidity : 65±5%RH
tests will be not conducted under functioning state.
1 High Temperature Operating 70°C±2°C, 96hrs (operation state)
2 Low Temperature Operating -20°C±2°C, 96hrs (operation state)
3 High Temperature Storage
4 Low Temperature Storage
5 Damp Proof Test
6 Vibration Test
Total fixed amplitude : 1.5mm
Vibration Frequency : 10~55Hz
One cycle 60 seconds to 3 directions of X, Y, Z for
each 15 minutes
7 Shock Test
To be measured after dropping from 60cm high on
the concrete surface in packing state.
Dropping method corner dropping
F A corner : once
B,C,D edge : once
E,F,G face : once
Note 1 :No dew condensation to be observed.
Note 2 :The function test shall be conducted after 4 hours storage at the normal
Temperature and humidity after removed from the test chamber.
Note 3 :Vibration test will be conducted to the product itself without putting it in a container.
F-51661GNCJU-MLW-AA (AA) No. 2002-0219