STATE LAMP. WP1503EC Datasheet

WP1503EC LAMP. Datasheet pdf. Equivalent

WP1503EC Datasheet
Recommendation WP1503EC Datasheet
Part WP1503EC
Description SOLID STATE LAMP
Feature WP1503EC; Features  Low power consumption.  Versatile mounting on P.C. board or panel.  T-1 3/4 diameter fl.
Manufacture Kingbright
Datasheet
Download WP1503EC Datasheet




Kingbright WP1503EC
Features
Low power consumption.
Versatile mounting on P.C. board or panel.
T-1 3/4 diameter flangeless package.
Reliable and rugged.
RoHS compliant.
T-1 3/4(5mm) SOLID STATE LAMP
Part Number: WP1503EC
High Efficiency Red
Description
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAF2378
APPROVED: WYNEC
REV NO: V.5A
CHECKED: Allen Liu
DATE: JAN/20/2015
DRAWN: Q.M.Chen
PAGE: 1 OF 6
ERP: 1101001562



Kingbright WP1503EC
Selection Guide
Part No.
Dice
Lens Type
WP1503EC
High Efficiency Red (GaAsP/GaP)
Water Clear
Notes:
1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2.Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (mcd) [2]
@ 10mA
Min. Typ.
50 100
*25 *50
Viewing
Angle [1]
2θ1/2
30°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units
Test Conditions
λpeak
Peak Wavelength
High Efficiency Red
627
nm IF=20mA
λD [1]
Dominant Wavelength
High Efficiency Red
617
nm IF=20mA
Δλ1/2
Spectral Line Half-width
High Efficiency Red
45
nm IF=20mA
C
Capacitance
High Efficiency Red
15
pF VF=0V;f=1MHz
VF [2]
Forward Voltage
High Efficiency Red
2
2.5 V
IF=20mA
IR
Reverse Current
High Efficiency Red
10 uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
High Efficiency Red
75
30
160
5
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
SPEC NO: DSAF2378
APPROVED: WYNEC
REV NO: V.5A
CHECKED: Allen Liu
DATE: JAN/20/2015
DRAWN: Q.M.Chen
Units
mW
mA
mA
V
PAGE: 2 OF 6
ERP: 1101001562



Kingbright WP1503EC
High Efficiency Red
WP1503EC
SPEC NO: DSAF2378
APPROVED: WYNEC
REV NO: V.5A
CHECKED: Allen Liu
DATE: JAN/20/2015
DRAWN: Q.M.Chen
PAGE: 3 OF 6
ERP: 1101001562







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)