Thyristor. P0080LB Datasheet

P0080LB Datasheet PDF


Part

P0080LB

Description

Over-voltage Protection Thyristor

Manufacture

LAN

Page 3 Pages
Datasheet
Download P0080LB Datasheet


P0080LB Datasheet
Over-voltage Protection Thyristor
PXXX0LB
PXXX0LB
Description
Thyristor solid state protection thyristor protect
telecommunications equipment such as modems, line cards,
fax machines, and other CPE.
P Series devices are used to enable equipment to meet
various regulatory requirements including GR 1089, ITU
K.20, K.21 and K.45, IEC 60950, and TIA-968
(formerly known as FCC Part 68)..
Compared to surge suppression using other technologies, P Series devices offer absolute surge protection
regardless of the surge current available and the rate of applied voltage (dv/dt). P Series devices:
Cannot be damaged by voltage
Eliminate hysteresis and heat dissipation typically found with clamping devices
Eliminate voltage overshoot caused by fast-rising transients
Are non-degenerative
Will not fatigue
Have low capacitance, making them ideal for high-speed transmission equipment
Electrical Parameters
Parameter
Definition
CO Off-state Capacitance — typical capacitance
measured in off state
di/dt Rate of Rise of Current — maximum rated value of
the acceptable rate of rise in current over time
IS Switching Current — maximum current required to
switch to on state
IDRM Leakage Current — maximum peak off-state current
measured at VDRM
IH Holding Current — minimum current required to
maintain on state
IPP Peak Pulse Current — maximum rated peak impulse
current
IT On-state Current — maximum rated continuous
on-state current
ITSM Peak One-cycle Surge Current — maximum rated
one-cycle AC current
VS Switching Voltage — maximum voltage prior to
switching to on state
VDRM
Peak Off-state Voltage — maximum voltage that can
be applied while maintaining off state
VF On-state Forward Voltage — maximum forward
voltage measured at rated on-state current
VT On-state Voltage — maximum voltage measured at
rated on-state current
PXXX0LB

P0080LB Datasheet
Over-voltage Protection Thyristor
PXXX0LB
Electrical Characteristics
Part
VDRM
VS
VT IDRM
IS
IT
IH
CO
Number*
Volts Volts Volts μAmps mAmps Amps mAmps
pF
P0080LB
6 25
4
5
800 2.2
50
85
P0300LB
25 40
4
5
800 2.2
50
85
P0640LB
58 77
4
5
800 2.2 150
60
P0720LB
65 88
4
5
800 2.2 150
60
P0900LB
75 88
4
5
800 2.2 150
55
P1100LB
90 130
4
5
800 2.2 150
55
P1300LB
120 160
4
5
800 2.2 150
55
P1500LB
140 180
4
5
800 2.2 150
60
P1800LB
170 220
4
5
800 2.2 150
60
P2000LB
180 220
4
5
800 2.2 150
60
P2300LB
190 260
4
5
800 2.2 150
55
P2600LB
220 300
4
5
800 2.2 150
50
P3100LB
275 350
4
5
800 2.2 150
45
P3500LB
320 400
4
5
800 2.2 150
40
P4000LB
360 460
4
5
800 2.2 150
40
P4500LB
400 540
4
5
800 2.2 150
40
P5000LB
440 600
4
5
800 2.2 150
40
* For surge ratings, see table below.
Notes:
• All measurements are made at an ambient temperature of 25. IPP applies to -40through +85temperature range.
• Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias and is typical value.
Surge Ratings
Series
B
IPP
2x10 μs
Amps
250
IPP
8x20μs
Amps
250
IPP IPP
IPP
10x160μs 10x560μs 10x1000μs
Amps
Amps
Amps
150 100
80
ITSM
60 Hz
Amps
30
di/dt
Amps/μs
500
Thermal Considerations
Package TO-92
Symbol
TJ
TS
RθJA
Parameter
Operating Junction
Temperature
Storage Temperature
Range
unction to Ambient on
printed circuit
Value
-40 to +150
-40 to +150
90
Unit
/W
PXXX0LB


Features Datasheet pdf Over-voltage Protection Thyristor PXXX0L B PXXX0LB Description Thyristor solid state protection thyristor protect tel ecommunications equipment such as modem s, line cards, fax machines, and other CPE. P Series devices are used to enabl e equipment to meet various regulatory requirements including GR 1089, ITU K.2 0, K.21 and K.45, IEC 60950, and TIA-96 8 (formerly known as FCC Part 68).. Co mpared to surge suppression using other technologies, P Series devices offer a bsolute surge protection regardless of the surge current available and the rat e of applied voltage (dv/dt). P Series devices: Cannot be damaged by voltage E liminate hysteresis and heat dissipatio n typically found with clamping devices Eliminate voltage overshoot caused by fast-rising transients Are non-degenera tive Will not fatigue Have low capacita nce, making them ideal for high-speed t ransmission equipment Electrical Param eters Parameter Definition CO Off-st ate Capacitance — typical capacitance measured in off state .
Keywords P0080LB, datasheet, pdf, LAN, Over-voltage, Protection, Thyristor, 0080LB, 080LB, 80LB, P0080L, P0080, P008, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)