Microcontroller. MK22FN512VLH12 Datasheet

MK22FN512VLH12 Microcontroller. Datasheet pdf. Equivalent

Part MK22FN512VLH12
Description Microcontroller
Feature NXP Semiconductors Data Sheet: Technical Data K22P121M120SF7 Rev. 7.1, 08/2016 Kinetis K22F 512KB .
Manufacture NXP
Datasheet
Download MK22FN512VLH12 Datasheet



MK22FN512VLH12
NXP Semiconductors
Data Sheet: Technical Data
K22P121M120SF7
Rev. 7.1, 08/2016
Kinetis K22F 512KB Flash
120 MHz ARM® Cortex®-M4 Based Microcontroller with FPU
The Kinetis K22 product family members are optimized for cost-
sensitive applications requiring low-power, USB connectivity, and
processing efficiency and high peripheral integration with a
floating point unit. These devices share the comprehensive
enablement and scalability of the Kinetis family.
This product offers:
• Run power consumption down to 156 µA/MHz and static
power consumption down to 3.8 µA, full state retention and
6 µS wakeup. Lowest static mode down to 140 nA.
• USB LS/FS OTG 2.0 with embedded 3.3 V, 120 mA LDO
voltage regulator. USB FS device crystal-less functionality.
MK22FN512VDC12
MK22FN512VLL12
MK22FN512VLH12
MK22FN512VMP12
MK22FN512VFX12
121 XFBGA (DC)
8 x 8 x 0.5 mm P .65
100 & 64 LQFP(LL&LH)
14x14x1.4 mm P .5(LL)
10x10x1.4 mm P .5(LH)
64 MAPBGA (MP)
88 QFN (FX)
5 x 5 x 1.2 mm P .5 10 x 10 x 0.9 mm P .4
Performance
• 120 MHz ARM Cortex-M4 core with DSP instructions
delivering 1.25 Dhrystone MIPS per MHz
Memories and memory interfaces
• 512 KB of embedded flash and 128 KB of RAM
• FlexBus external bus interface 1
• Serial programming interface (EzPort)
• Preprogrammed Kinetis flashloader for one-time, in-
system factory programming
Timers
• Two 8-ch general purpose/PWM timers
• Two 2-ch general purpose timers with quadrature
decoder functionality
• Periodic interrupt timers
• 16-bit low-power timer
• Real-time clock with independent power domain
• Programmable delay block
Security and integrity modules
• Hardware CRC module
• 128-bit unique identification (ID) number per chip
• Hardware random-number generator
• Flash access control to protect proprietary software
Operating Characteristics
• Voltage range (including flash writes): 1.71 to 3.6 V
• Temperature range (ambient): -40 to 105°C
Analog modules
• Two 16-bit SAR ADCs (1.2 MS/s in 12bit mode)
• Two 12-bit DACs 2
• Two analog comparators (CMP) with 6-bit DAC
• Accurate internal voltage reference
System peripherals
• Flexible low-power modes, multiple wake-up
sources
• 16-channel DMA controller
• Independent external and software watchdog
monitor
Clocks
• Two crystal oscillators: 32 kHz (RTC) and 32-40 kHz
or 3-32 MHz
• Three internal oscillators: 32 kHz, 4 MHz, & 48 MHz
• Multipurpose clock generator with PLL and FLL
Communication interfaces
• USB full/low-speed On-the-Go controller
• USB full-speed device crystal-less operation
• Two SPI modules and I2S module
• Three UART modules and one low-power UART
• Two I2C: Support for up to 1 Mbps operation
Human-machine interface
• Up to 81 general-purpose I/O (GPIO)
NXP reserves the right to change the production detail specifications as may be
required to permit improvements in the design of its products.



MK22FN512VLH12
1. MK22FN512VFX12 (88QFN) does not support the FlexBus function.
2. MK22FN512VFX12 (88QFN) does not support the DAC1 function.
Ordering Information
Part Number
MK22FN512VDC12
MK22FN512VLL12
MK22FN512VLH12
MK22FN512VMP12
MK22FN512VFX12
Flash (KB)
512
512
512
512
512
Memory
SRAM (KB)
128
128
128
128
128
Maximum number of I/O's
81
66
40
40
60
Device Mask Set Number
0N50M
Device Revision Number
0001
SIM_SDID[REVID]
JTAG ID Register[PRN]
0001
Related Resources
Type
Description
Document
Selector Guide The NXP Solution Advisor is a web-based tool that features interactive
application wizards and a dynamic product selector
KINETISKMCUSELGD
Product Brief
The Product Brief contains concise overview/summary information to enable K22FPB
quick evaluation of a device for design suitability.
Reference
Manual
The Reference Manual contains a comprehensive description of the
structure and function (operation) of a device.
K22P121M120SF7RM
Data Sheet
The Data Sheet is this document. It includes electrical characteristics and
signal connections.
K22P121M120SF7
Chip Errata
The chip mask set Errata provides additional or corrective information for a KINETIS_K_xN50M1
particular device mask set.
Package drawing Package dimensions are provided by part number:
• MK22FN512VDC12
• MK22FN512VLL12
• MK22FN512VLH12
• MK22FN512VMP12
• MK22FN512VFX12
Package drawing:
98ASA00595D
98ASS23308W
98ASS23234W
98ASA00420D
98ASA00935D
Engineering
Bulletin
This engineering bulletin gives connection recommendations specifically for
microcontrollers in DFN and QFN packages.
Electrical Connection
Recommendations for the
Exposed Pad on QFN and
DFN Packages.
1. To find the associated resource, go to nxp.com and perform a search using this term with the x replaced by the revision
of the device you are using.
Figure 1 shows the functional modules in the chip.
2
NXP Semiconductors
Kinetis K22F 512KB Flash, Rev. 7.1, 08/2016





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)