VOLTAGE SUPPRESSOR. 3KP60CA Datasheet

3KP60CA SUPPRESSOR. Datasheet pdf. Equivalent

Part 3KP60CA
Description TRANSIENT VOLTAGE SUPPRESSOR
Feature TRANSIENT VOLTAGE SUPPRESSOR RoHS 3KP5.0A~3KP220CA 3000 Watts FEATURES • Glass passivated chip ju.
Manufacture RFE
Datasheet
Download 3KP60CA Datasheet



3KP60CA
TRANSIENT VOLTAGE SUPPRESSOR RoHS
3KP5.0A~3KP220CA
3000 Watts
FEATURES
• Glass passivated chip junction
• Available in uni-directional & bi-directional
• 3000W surge capability at 10×100 s waveform,
duty cycle: 0.01%  
• Excellent clamping capability
• Low incremental surge resistance
• Fast response time: Typically less than 1.0ps from
0 volts to BV min
• Typical IR less 2 A above 12V
High temperature soldering capability:
260/40 seconds/.375” (9.5mm) Lead
length/5lbs. (2.3kg) tension
Voltage Range 5.0 to 220 Volts
3000 Watts Peak Power
7.0 Watts Steady State
MECHANICAL DATA
• Molded plastic body (UL 94V-0 rated)
• Axial leads, solderable per MIL-STD 202, Method 208
• Color band denotes cathode, except for bipolar
• Weight: 1.7 gram
R-6 (P600)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS
Rating at 25ambient temperature unless otherwise specified.
Single phase, half wave,60Hz, resistive or inductive load.
For capactitive load, derate current by 20%
Parameter
Peak Power Dissipation at TA=25,Tp=1ms
(Note 1)
Steady State Power Dissipation at TL=75
Lead Lengths. "0.495” (12.5mm) Note 2
Peak Forward Surge Current, 8.3 ms Single
Half sine-wave Superimposed on Rated Load
(JEDEC method) (Note 3)
Symbol
Pppm
PD
IFSM
Operating and Storage Temperature
TJ,TSTG
Value
Minimum 3000
7.0
300
-55 to +175
Unit
Watts
Watts
Amps
NOTE: 1. Non-repetitive current pulse, per Fig-1 and derated above TA=25per Fig. 2 .
2. Mounted on Copper Pad Area of 1.6×1.6” (40×40mm) per Fig-5
3. 10ms Single Half Sine-Wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minutes Maximum.
Devices for Bipolar Applications
1. Electrical Characteristics Apply in Both Directions.
Page 1 of 4
C3TVS6
2011.10.27



3KP60CA
TRANSIENT VOLTAGE SUPPRESSOR RoHS
3KP5.0A~3KP220CA
3000 Watts
RATING & CHARACTERISTIC CURVES
FIG 1-Peak Pulse Power Rating Curve
Non-Repetitive Pulse
Waveform shown FIG-3
TA=25
FIG 2-Pulse Power or Current VS Initial junction
Temperature
Peak Width (Sec)
FIG 3-Pulse Waveform
tr=10
Peak Value
IPPM
TJ=25
Pulse Width(td) is defined as
the point where the Peak
Current Decays to 50% of IPPM
Half Value-IPP
2
10/1000 WAVEFORM AS
Dedined by R.R.A.
Time (ms)
FIG 5-Maximum Non-Repetitive Surge Current
60Hz
Resistive or inductive Load
0.375” (9.5mm)
Lead Lengths
Ambient Temperature ()
FIG 4-Power Derating Curve
Unidirectional
Bidirectional
VR=Rated
Stand-off Voltage
f=1MHz
Vsig=50mVp-p
TJ=25
Lead Temperature ()
FIG 5-Maximum Non-Repetitive Surge Current
1.6x1.6x0.040” (40x40x1mm)
Copper Heat Sinks
Lead Temperature ()
Page 2 of 4
Number of cycles at 60Hz
C3TVS6
2011.10.27





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)