Part Number

SM8S32CA

Description

6600W Transient Voltage Suppressor

Manufacture

Leiditech

Total Page 6 Pages
PDF Download
Download SM8S32CA Datasheet PDF


Features Datasheet pdf SM8S Series 6600W Transient Voltage Supp ressor DESCRIPTION: SM8S Series TVS di odes can be used in sensitive electroni cs protection against voltage transient s induced by inductive load switching a nd lighting, especially for automotive load dump protection application. DO-2 18AB FEATURES:  Available in uni/bi -directional polarity.  Low forward voltage drop & Low leakage current.  High surge capability.  Junction pa ssivation optimized design passivated a nisotropic rectifier technology.  TJ = 175 ℃ capability suitable for high reliability and automotive requirement .  Meets ISO7637-2 surge specificati on (varied by test condition).  Meet s MSL level 1, per J-STD-020, LF maximum peak of 245.
Keywords SM8S32CA, datasheet, pdf, Leiditech, 6600W, Transient, Voltage, Suppressor, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

SM8S32CA Datasheet
SM8S Series 6600W Transient Voltage Suppressor
DESCRIPTION:
SM8S Series TVS diodes can be used in sensitive electronics
protection against voltage transients induced by inductive load
switching and lighting, especially for automotive load dump
protection application.
DO-218AB
FEATURES:
Available in uni/bi-directional polarity.
Low forward voltage drop & Low leakage current.
High surge capability.
Junction passivation optimized design passivated anisotropic rectifier technology.
TJ = 175 capability suitable for high reliability and automotive requirement.
Meets ISO7637-2 surge specification (varied by test condition).
Meets MSL level 1, per J-STD-020, LF maximum peak of 245.
AEC-Q101 qualified.
Compliant to ROHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC
ABSOLUTE MAXIMUM RATINGS (TC=25ºC, RH=45%-75%, unless otherwise noted)
Parameter
Symbol
Value
Unit
Peak pulse power dissipation on 10/1000us waveform
Peak pulse power dissipation on 10/10000us waveform
Ppp
6600
5200
Watts
Watts
Peak pulse current with 10/1000us waveform
Power dissipation on infinite heat Sink at TC=25
Ipp See next table Amps
PD 8.0 Watts
Peak forward surge current, 8.3ms single half sine-wave IFSM
Operating Junction and Storage Temperature Range TJ ,TSTG
Typical thermal resistance, junction to case
RθJC
700
-55 to +150
0.9
Amps
/Watt
Rev : 01.06.2014
1/6 www.leiditech.com




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)