Drive Optocoupler. HCPL-J312 Datasheet

HCPL-J312 Optocoupler. Datasheet pdf. Equivalent

Part HCPL-J312
Description Agilent 2.5 Amp Output Current IGBT Gate Drive Optocoupler
Feature www.DataSheet4U.com Agilent 2.5 Amp Output Current IGBT Gate Drive Optocoupler Data Sheet HCPL-312.
Manufacture Agilent
Datasheet
Download HCPL-J312 Datasheet

HCPL-3120/J312, HCNW3120 2.5 Amp Output Current IGBT Gate Dr HCPL-J312 Datasheet
www.DataSheet4U.com Agilent 2.5 Amp Output Current IGBT Gat HCPL-J312 Datasheet
Recommendation Recommendation Datasheet HCPL-J312 Datasheet





HCPL-J312
www.DataSheet4U.com
Agilent 2.5 Amp Output Current IGBT
Gate Drive Optocoupler
Data Sheet
HCPL-3120
HCPL-J312
HCNW3120
Functional Diagram
N/C 1
ANODE 2
CATHODE 3
N/C 4
HCPL-3120/J312
SHIELD
HCNW3120
8 VCC
N/C 1
8 VCC
7 VO ANODE 2 DataSheet4U.com7 VO
6 VO CATHODE 3
6 N/C
5 VEE
N/C 4
SHIELD
5 VEE
TRUTH TABLE
VCC - VEE
VCC - VEE
“POSITIVE GOING” “NEGATIVE GOING”
LED (i.e., TURN-ON)
(i.e., TURN-OFF)
OFF
0 - 30 V
0 - 30 V
VO
LOW
ON 0 - 11 V
0 - 9.5 V
LOW
ON 11 - 13.5 V
9.5 - 12 V
TRANSITION
ON 13.5 - 30 V
12 - 30 V
HIGH
A 0.1 µF bypass capacitor must be connected between pins 5 and 8.
Features
• 2.5 A maximum peak output
current
• 2.0 A minimum peak output
current
• 15 kV/µs minimum Common Mode
Rejection (CMR) at VCM = 1500 V
• 0.5 V maximum low level output
voltage (VOL)
Eliminates need for negative gate
drive
• ICC = 5 mA maximum supply
current
• Under Voltage Lock-Out protection
(UVLO) with hysteresis
• Wide operating VCC range: 15 to
30 Volts
• 500 ns maximum switching speeds
• Industrial temperature range:
-40°C to 100°C
• Safety Approval
UL Recognized
3750 Vrms for 1 min. for
HCPL-3120/J312
5000 Vrms for 1 min. for
HCNW3120
CSA Approval
IEC/EN/DIN EN 60747-5-2
Approved
VIORM = 630 Vpeak for HCPL-3120
(Option 060)
VIORM = 891 Vpeak for HCPL-J312
VIORM = 1414 Vpeak for HCNW3120
Applications
• IGBT/MOSFET gate drive
• AC/Brushless DC motor drives
• Industrial inverters
• Switch mode power supplies
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this
component to prevent damage and/or degradation which may be induced by ESD.
DataSheet4U.com
DataShee
DataSheet4 U .com



HCPL-J312
www.DataSheet4U.com
Description
The HCPL-3120 contains a
GaAsP LED while the
HCPL-J312 and the HCNW3120
contain an AlGaAs LED. The
LED is optically coupled to an
integrated circuit with a power
output stage. These optocouplers
are ideally suited for driving
power IGBTs and MOSFETs
used in motor control inverter
applications. The high operating
voltage range of the output stage
provides the drive voltages
required by gate controlled
devices. The voltage and current
supplied by these optocouplers
make them ideally suited for
directly driving IGBTs with
ratings up to 1200 V/100 A. For
IGBTs with higher ratings, the
HCPL-3120 series can be used to
drive a discrete power stage
which drives the IGBT gate. The
HCNW3120 has the highest
insulation voltage of
VIORM = 1414 Vpeak in the
IEC/EN/DIN EN 60747-5-2. The
HCPL-J312 has an insulation
voltage of VIORM = 891 Vpeak and
the VIORM = 630 Vpeak is also
available with the HCPL-3120
(Option 060).
Selection Guide
Part Number
Output Peak Current ( IO)
IEC/EN/DIN EN
60747-5-2 Approval
HCPL-3120
2.5 A
VIORM = 630 Vpeak
(Option 060)
HCPL-J312
2.5 A
VIORM = 891 Vpeak
HCNW3120
2.5 A
VIORM = 1414 Vpeak
*The HCPL-3150 Data sheet available. Contact Agilent sales representative or authorized distributor.
HCPL-3150*
0.6 A
VIORM = 630 Vpeak
(Option 060)
et4U.com
Ordering Information
Specify Part Number followed by Option Number (if desired)
Example:
HCPL-3120#XXXX
DataSheet4U.com
060 = IEC/EN/DIN EN 60747-5-2, VIORM = 630 Vpeak (HCPL-3120 only)
300 = Gull Wing Surface Mount Option
500 = Tape and Reel Packaging Option
XXXE = Lead Free Option
Option 500 contains 1000 units (HCPL-3120/J312), 750 units (HCNW3120) per reel.
Other options contain 50 units (HCPL-3120/J312), 42 units (HCNW312) per tube.
Option data sheets available. Contact Agilent sales representative or authorized distributor.
Remarks: The notation “#” is used for existing products, while (new) products launched since 15th July
2001 and lead free option will use “-”.
DataShee
DataSheet4U.com
2
DataSheet4 U .com





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)