welding torch. MTXC-3531 Datasheet

MTXC-3531 torch. Datasheet pdf. Equivalent

MTXC-3531 Datasheet
Recommendation MTXC-3531 Datasheet
Part MTXC-3531
Description Shock sensor built-in type welding torch
Feature MTXC-3531; Thank you for purchasing DAIHEN shock sensor built-in type CO2 /MAG welding torch. Before use, read .
Manufacture DAIHEN
Datasheet
Download MTXC-3531 Datasheet




DAIHEN MTXC-3531
Thank you for purchasing DAIHEN shock sensor built-in type CO2 /MAG welding torch.
Before use, read this instruction manual thoroughly to use the product correctly.
[ Not e] 1. The contents in this instruction manual are subject to change without prior notice.
2. We have carefully written the standard specifications to eliminate as many errors as possible.
Even if any errors are found in the contents, we are not responsible for any damage resulting
from those errors.
3. No part of this instruction manual may be reproduced or stored in any form without the express
written permission.
. Specifications
This is the “Shock sensor built-in type welding torch” to be used for CO2/MAG welding.
The specifications are shown in Table 1.1. (Refer to Fig. 1.1 ~1.3 for the outline drawing.)
Model
To r c h t y p e
Welding process
Max. operating
current
Rated duty cycle
Wire type
Applicable wire
diameter
Cooling system
Nozzle cleaning
function
Shock sensor
MTX-
3531
Straight
Table 1.1 Specifications of welding torch
MTXC- MTXB- MTXCB- MTX- MTXC- MTXB- MTXCB- MTXW- MTXCW-
3531 3531 3531 5031 5031 5031 5031 5031 5031
Curved Straight Curved Straight Curved Straight Curved Straight Curved
CO2 (MAG)
350A250A
500A300A
500A350A
50
50
Solid wire, Flux cored wire
70
(φ 0.8)(φ 0.9)(φ 1.0) φ 1.2 (φ 1.4)(φ 1.6
Air cooling
(φ 0.8)(φ 0.9
(φ 1.0)(φ 1.2
(φ 1.4) φ 1.6
Water cooling
Air-blow
Air-blow
Built-in
Note) 1. While using MTXW-5031 and MTXCW-5031, be sure that cooling water is being supplied with the water
tank (PU-301).
2. The maximum operating current and rated duty cycle are different between CO2 and MAG welding system.
3. The model MTXB-3531, MTXCB-3531, MTXB-5031 and MTXCB-5031 shall be used accompanied with the
air-blow unit. (Refer to the section 3.5.)
4. Shock sensor function
In the Arc welding system, a welding torch may collide with a workpiece or jig, resulting in its deformation,
or the robot body may get damaged. To avoid such an accident, this welding torch has the shock sensor
function, which stops the robot motion immediately when excess force is applied on the torch tip (nozzle
part), by keeping the nozzle part away and outputting the excess force detection signal at a time.
(* However, this function does not guarantee the torch positioning accuracy. After the shock sensor was
activated, ensure the torch aiming point.) (See the section 5.2.)
1



DAIHEN MTXC-3531
質量 1.4kg
Weight 1.4[kg] 3.08[lb]
MTX-3531 形ショックセンサ付空冷 350A
CO2/MAG ストレートトーチ外形図
Air-cooled 350A CO2/MAG straight torch
MTX-3531 with shock sensor
質量 1.5kg
Weight 1.5[kg] 3.3[lb]
MTXC-3531 形ショックセンサ付空冷 350A
CO2/MAG カーブドトーチ外形図
Air-cooled 350A CO2/MAG curved torch
MTXC-3531 with shock sensor
質量 1.45kg
Weight 1.45[kg] 3.19[lb]
MTXB-3531 形ショックセンサ付空冷 350A
CO2/MAG エアブローストレートトーチ外形図
Air-cooled 350A CO2/MAG air-blow straight
torch
MTXB-3531 with shock sensor
質量 1.55kg
Weight 1.55[kg] 3.41[lb]
MTXCB-3531 形ショックセンサ付空冷 350A
CO2/MAG エアブローカーブドトーチ外形図
Air-cooled 350A CO2/MAG air-blow curved torch
MTXCB-3531 with shock sensor
Fig.1.1 Outline drawing of air-cooled 350A torch Unit (mm)
2



DAIHEN MTXC-3531
質量 1.5kg
Weight 1.5[kg] 3.3[lb]
MTX-5031 形ショックセンサ付空冷 500A
CO2/MAG ストレートトーチ外形図
Air-cooled 500A CO2/MAG straight torch
MTX-5031 with shock sensor
質量 1.6kg
Weight 1.6[kg] 3.52[Ib]
MTXC-5031 形ショックセンサ付空冷 500A
CO2/MAG カーブドトーチ外形図
Air-cooled 500A CO2/MAG curved torch
MTXC-5031 with shock sensor
質量 1.65kg
Weight 1.65[kg] 3.63[lb]
MTXB-5031 形ショックセンサ付空冷 500A
CO2/MAG エアブローストレートトーチ外形図
Air-cooled 500A CO2/MAG straight torch
MTXB-5031 with shock sensor
質量 1.65kg
Weight 1.75[kg] 3.85[lb]
MTXCB-5031 形ショックセンサ付空冷 500A
CO2/MAG エアブローカーブドトーチ外形図
Air-cooled 500A CO2/MAG curved torch
MTXCB-5031 with shock sensor
Fig.1.2 Outline drawing of air-cooled 500A torch Unit (mm)
3







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)