HCNW4503 Datasheet PDF


Part Number

HCNW4503

Description

High Speed Optocouplers

Manufacture

HP

Total Page 17 Pages
PDF Download
Download HCNW4503 Datasheet PDF


Features Datasheet pdf Single Channel, High Speed Optocouplers Technical Data H 6N135/6 HCNW135/6 HCN W4502/3 HCPL-0452/3 HCPL-0500/1 HCPL-45 02/3 Features • 15 kV/µs Minimum Co mmon Mode Transient Immunity at VCM = 1 500 V (4503/0453) • High Speed: 1 Mb/ s • TTL Compatible • Available in 8 -Pin DIP, SO-8, Widebody Packages • O pen Collector Output • Guaranteed Per formance from Temperature: 0°C to 70° C • Safety Approval UL Recognized – 2500 V rms for 1 minute (5000 V rms fo r 1 minute for HCNW and Option 020 devi ces) per UL1577 CSA Approved VDE 0884 A pproved –VIORM = 630 V peak for HCPL- 4503#060 –VIORM = 1414 V peak for HCN W devices BSI Certified (HCNW devices o nly) • Dual Channel Version Available (253X/4534/053X/ 0534.
Keywords HCNW4503, datasheet, pdf, HP, High, Speed, Optocouplers, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

HCNW4503 Datasheet
Single Channel, High Speed
Optocouplers
Technical Data
H
6N135/6
HCNW135/6
HCNW4502/3
HCPL-0452/3
HCPL-0500/1
HCPL-4502/3
Features
• 15 kV/µs Minimum Common
Mode Transient Immunity at
VCM = 1500 V (4503/0453)
• High Speed: 1 Mb/s
• TTL Compatible
• Available in 8-Pin DIP, SO-8,
Widebody Packages
• Open Collector Output
• Guaranteed Performance
from Temperature: 0°C
to 70°C
• Safety Approval
UL Recognized – 2500 V rms
for 1 minute (5000 V rms for
1 minute for HCNW and
Option 020 devices) per
UL1577
CSA Approved
VDE 0884 Approved
–VIORM = 630 V peak for
HCPL-4503#060
–VIORM = 1414 V peak for
HCNW devices
BSI Certified
(HCNW devices only)
• Dual Channel Version
Available (253X/4534/053X/
0534)
• MIL-STD-1772 Version
Available (55XX/65XX/4N55)
Applications
• High Voltage Insulation
• Video Signal Isolation
• Power Transistor Isolation
in Motor Drives
• Line Receivers
• Feedback Element in
Switched Mode Power
Supplies
• High Speed Logic Ground
Isolation – TTL/TTL, TTL/
CMOS, TTL/LSTTL
• Replaces Pulse Transformers
• Replaces Slow
Phototransistor Isolators
• Analog Signal Ground
Isolation
Description
These diode-transistor optocoup-
lers use an insulating layer
between a LED and an integrated
photodetector to provide elec-
trical insulation between input
and output. Separate connections
for the photodiode bias and
output-transistor collector
increase the speed up to a
hundred times that of a conven-
tional phototransistor coupler by
reducing the base-collector
capacitance.
Functional Diagram
NC 1
ANODE 2
CATHODE 3
NC 4
8 VCC
*
7 VB
6 VO
5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED
VO
ON
OFF
LOW
HIGH
* NOTE: FOR 4502/3, 0452/3,
PIN 7 IS NOT CONNECTED.
A 0.1 µF bypass capacitor must be connected between pins 5 and 8.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
1-16
5965-3605E




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)