Diode Array. UDT26A05L05 Datasheet

UDT26A05L05 Array. Datasheet pdf. Equivalent


Brightking UDT26A05L05
DESCRIPTION
UDT26A05L05 are surge rated diode arrays designed to protect high speed
data interfaces.This series has been specifically designed to protect sensitive
components which are connected to data and transmission lines from over-
voltage caused by electrostatic discharge(ESD),electrical fast transients (EFT),
and lightning.
The unique design of the UDT26A05L05 devices incorporates one surge rated,
and four data lines.Low capacitance steering diodes and a TVS diode in a single
package.The low capacitance array configuration allows the user to protect four
high-speed data or transmission lines.
UDT26A05L05
+%0  ̈́N9
$LU 0RGH  ̈́N9
SPECIFICATION FEATURES
ϥ IEC61000-4-2 ESD 15KV Air,8KV contact compliance
ϥ ʳʳSmall SOT23-6L surface mount package
ϥ Protects four high-speed data lines and one power line
ϥ Array of surge rated,low capacitance diodes
ϥ Low clamping voltage
ϥ Low leakage current
ϥ Solid-state silicon avalanche technology
ϥ Lead Free/RoHS compliant
ϥ Marking: B 05B or 054
UDT26A05L05
APPLICATIONS
ϥ USB power and data line protection
ϥ 10/100/1000 Ethernet
ϥ Video line protection
ϥ I2C bus protection
ϥ WAN/LAN equipment
ϥ ISDN S/T interface
ϥ Microcontroller input protection
ϥ Portable electronics
DVI connector
Revision:07-Mar-12
UDT26A05L05
DVI Data Line Protection
www.brightking.com


UDT26A05L05 Datasheet
Recommendation UDT26A05L05 Datasheet
Part UDT26A05L05
Description Low Capacitance TVS Diode Array
Feature UDT26A05L05; DESCRIPTION UDT26A05L05 are surge rated diode arrays designed to protect high speed data interfaces..
Manufacture Brightking
Datasheet
Download UDT26A05L05 Datasheet




Brightking UDT26A05L05
ELECTRICAL CHARACTERISTICS (TJ =25ć)
UDT26A05L05
Rating
ESD voltage (HBM contact)
ESD voltage (AIR contact)
Storage & operating temperature range
Symbol
VESD
TSTG ,TJ
Value
±8
±15
-55~+150
Unit
KV
ć
Parameter
Reverse stand-off voltage
Reverse breakdown voltage
Reverse leakage current
Clamping voltage (tp=8/20ȝs)
Clamping voltage (tp=8/20ȝs)
Off state junction capacitance
Symbol
VRWM
VBR
IR
VC
VC
CJ
Condition
Min. Typ. Max. Unit
5V
IBR =1mA
6
V
VR =5V
5 ȝA
IPP =1A
9.8 V
IPP =2A
0Vdc,f=1MHZ
between I/O
pins and GND
11
2.5
V
pF
Revision:07-Mar-12
www.brightking.com



Brightking UDT26A05L05
ESD PROTECTION STANDARDS
UDT26A05L05
IEC 61000-4-2
Interfaces of consumer electronic equipment are widely specified according to the International
Electrotechnical Commission standard IEC 61000-4-2. This standard is not targeted towards
particular devices but towards general equipment, systems and subsystems that may be involved
in electrostatic discharge. consists of a 150 pF capacitor and a 330¡ series resistor representing
the counterpart to the Device Under Test (DUT).
Test circuit according IEC 61000-4-2
ESD surge according IEC 61000-4-2
Revision:07-Mar-12
www.brightking.com







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)