Chip Inductors. LB2012T101K Datasheet

LB2012T101K Inductors. Datasheet pdf. Equivalent


TAIYO YUDEN LB2012T101K
Spec Sheet
Wire-wound Chip Inductors (LB series)[LB]
LB2012T101K
Features
Item Summary
100uH±10%, 45mA, 0805/2012 (EIA/JIS)
Lifecycle Stage
Mass Production
Standard packaging quantity (minimum)
Taping Embossed 3000pcs
Products characteristics table
Inductance
Case Size (EIA/JIS)
Rated Current (max)
DC Resistance (max)
DC Resistance (typ)
LQ Measuring Frequency
Self Resonant Frequency (min)
Operating Temp. Range
Temperature characteristic
(Inductance change)
RoHS2 Compliance (10 subst.)
REACH Compliance (181 subst.)
Halogen Free
Soldering
100 uH ± 10 %
0805/2012
45 mA
9.1 Ω
0.796 MHz
8 MHz
-40 to +105 ℃
(Including-self-generated heat)
± 20 %
Yes
Yes
Yes
Reflow
External Dimensions
Dimension L
2.0 ±0.2 mm
Dimension W
1.25 ±0.2 mm
Dimension T
1.25 ±0.2 mm
Dimension e
0.5 ±0.2 mm
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.
Powered by TCPDF (www.tcpdf.org)
2018.10.29
http://www.ty-top.com


LB2012T101K Datasheet
Recommendation LB2012T101K Datasheet
Part LB2012T101K
Description Wire-wound Chip Inductors
Feature LB2012T101K; Spec Sheet Wire-wound Chip Inductors (LB series)[LB] LB2012T101K Features Item Summary 100uH±10%, 45.
Manufacture TAIYO YUDEN
Datasheet
Download LB2012T101K Datasheet




TAIYO YUDEN LB2012T101K
Halogen free / RoHS compliant
Wire Wound Inductor
-Electrical Characteristics Data-
2016/7/22
Wire-wound Chip Inductors (LB series)
LB2012T101K
Dimension
Length :
Width :
Height :
unit : mm
2.0 + / - 0.2
1.25 + / - 0.2
1.25 + / - 0.2
unit : inch
( 0.079 + / - 0.008 )
( 0.049 + / - 0.008 )
( 0.049 + / - 0.008 )
Inductance : 100
uH ( test freq at 0.796MHz )
DC Resistance : 7.0 / 9.1 ohm ( typ / max )
Rated Current : 45
mA
Rated current typical : 10% reduction from initial L value.
and Temperature will rise by 20 deg C
DC Bias vs Inductance
150
100
50
0
0 20 40 60 80 100
DC Bias [mA]
10000
Frequency vs Inductance
1000
100
10
0.1
1 10
Frequency [MHz]
100
60
50
40
30
20
10
0
0
DC Bias vs Temperature
60 120 180 240 300
DC Bias [mA]
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.



TAIYO YUDEN LB2012T101K
Notice for TAIYO YUDEN Products
Please read this notice before using the TAIYO YUDEN products.
! REMINDERS
Please conduct validation and verification of our products in actual condition of mounting and operating environment before using our
products.
The product listed in this spec sheet is intended for use in general electronic equipment (e.g., AV equipment, OA equipment, home electric
appliances, office equipment, information and communication equipment including, without limitation, mobile phone, and PC) and medical
equipment classified as Class I or II by IMDRF. Please be sure to contact TAIYO YUDEN for further information before using the products for any
equipment which may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment, disaster prevention equipment,
medical equipment classified as Class III by IMDRF, highly public information network equipment including, without limitation, telephone
exchange, and base station).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g., aerospace equipment,
aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control equipment, undersea equipment, military
equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g., in-flight
entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN. Please be sure to
contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic equipment, it is strongly
recommended to perform a thorough safety evaluation prior to use of our products and to install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way responsible for any damages
incurred by you or third parties arising from use of the product listed in this spec sheet for any equipment requiring inquiry to TAIYO YUDEN or
prohibited for use by TAIYO YUDEN as described above.
Information contained in this spec sheet is intended to convey examples of typical performances and/or applications of our products and is not
intended to make any warranty with respect to the intellectual property rights or any other related rights of TAIYO YUDEN or any third parties
nor grant any license under such rights.
Please note that the scope of warranty for our products is limited to the delivered our products themselves and TAIYO YUDEN shall not be in
any way responsible for any damages resulting from a fault or defect in our products. Notwithstanding the foregoing, if there is a written
agreement (e.g., supply and purchase agreement, quality assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will
warrant our products in accordance with such agreement.
The contents of this spec sheet are applicable to our products which are purchased from our sales offices or authorized distributors
(hereinafter “TAIYO YUDEN’s official sales channel”). Please note that the contents of this spec sheet are not applicable to our products
purchased from any seller other than TAIYO YUDEN’s official sales channel.
Caution for Export
The product listed in this spec sheet may require specific procedures for export according to “U.S. Export Administration Regulations”, “Foreign
Exchange and Foreign Trade Control Law” of Japan, and other applicable regulations. Should you have any questions on this matter, please
contact our sales staff.







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)