I2C compatible color sensor
The S13683-02WT is a color sensor that supports the inter-integrated circuit (I2C) interface. It is sensitive to red (λp=615
nm), green (λp=530 nm), blue (λp=460 nm), and infrared (λp=855 nm) light, and outputs detected results as 16-bit digital
data for each color. The sensor automatically switches the photodiode of each color in order to perform measurements. The
sensitivity and integration time are adjustable so that light measurements can be performed over a wide range. We provide
an evaluation kit for this product. Contact us for detailed information.
I2C interface compatible
Sequential measurements of red, green, blue, and infrared light
2-step sensitivity switching (sensitivity ratio 1:10)
Adjustable sensitivity (1 to 65535 times) by setting the integration time
Low voltage (2.5 V or 3.3 V) operation
Low current consumption: 75 μA typ.
With infrared cutoff filter
Wide dynamic range (low gain: 1 to 10 klx)
LCD backlight adjustment on cell phones, notebook PCs, etc.
Energy-saving sensors on wide screen TV, etc.
Various light level detection and chromaticity adjustment
Absolute maximum ratings (Ta=25 °C unless otherwise noted)
-0.3 to +4.5
Topr No dew condensation*1
-40 to +85
Tstg No dew condensation*1
-40 to +100
Reflow soldering conditions*2
Peak temperature: 260 °C, three times (see P.11)
*1: When there is a temperature difference between a product and the surrounding area in high humidity environment, dew condensa-
tion may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability.
*2: M oisture absorption and reflow conditions: JEDEC J-STD-020D LEVEL2a
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the prod-
uct within the absolute maximum ratings.