ESD suppressor. 41206ESDA Datasheet

41206ESDA suppressor. Datasheet pdf. Equivalent

Part 41206ESDA
Description ESD suppressor
Feature Technical Data DS41206 Effective May 2017 Supersedes August 2006 41206ESDA ESD suppressor four-cha.
Manufacture EATON
Total Page 3 Pages
Datasheet
Download 41206ESDA Datasheet



41206ESDA
Technical Data DS41206
Effective May 2017
Supersedes August 2006
41206ESDA
ESD suppressor four-channel
Product features
The best ESD protection for high frequency, low
voltage applications.
Protects up to 4 separate lines with one device
Exceeds testing requirements outlined in IEC
61000-4-2
Extremely low capacitance
Very low leakage current
Fast response time
Bi-directional
Surface mount
Solder termination
RoHS compliant
Device marking
ESDA devices are marked on the tape and reel
packages, not individually. Since the product is bi-
directional and symmetrical, no orientation marking is
required.
Device application
ESDA family are applicable to most signal line circuits. It is applied
in a shunt-connected manner. They are not suitable for use on
lines where lighting or load-switching transients are present.
ESDA family is ideal for use in computers and computer-related
equip-ment, such as modems, keyboards, and printers. ESDA
family is also well suited for portable electronic equipment such
as mobile telephones, test equipment, and card scanners.
Processing recommendations
ESDA family currently have a convex profile on the top surface of
the part. This profile is a result of the construction of the device.
They can be processed using standard pick – and – place
equipment. The placement and processing techniques for ESDA
family are similar to those used for chip resistors and chip
capacitors.
The Location in the circuit for the ESDA family has to be carefully
determined. For the better performance of the device, the device
should be positioned as close to the signal input as possible and
ahead of any other component.
Part Numbering
Device
Con guration
41206
ESD
PolySurg™
Device
Designator
A -TR1
Packaging Options
-TR1 = (standard) 5,000 pcs, tape-and-reel
-SP1 = (samples) 10 pcs on tape, in bag
Device Characteristics
A = Standard
Note: Spacing in part number is shown for clarity only. Device part number contains no spaces (e.g.41206ESDA-TR1)
Part Ratings and Characteristics:
Performance Characteristics
Continuous operating voltage
Clamping voltage 3
Trigger voltage 4
ESD Threat voltage capability 5
Capacitance (@ 1 KHz ~ 1.8GHz)
Leakage current (@ 12 VDC)
Peak current 3
Operating temperature
ESD pulse withstand 3
Units
VDC
V
V
kV
pF
nA
A
°C
# pulses
Min
-
-
-
-
-
-40
20
Typ
12 1
35
150
8
0.15
30
+25
>500 2
Max
-
60
300
15
1
100
45
+105
-
Notes:
1. The product is 100% tested for 30V operating voltage at 25°C.
Continuous operation with higher than 12VDC under extreme
temperature and humidity may cause increasing leakage cur-
rent and/or shifting device resistance. However, even under
severe environmental test, characteristics of the device did not
change up to 12VDC operation.
2. Some shifting in characteristics may occur when tested over
several hundred ESD pulses at very rapid rate of 1 pulse per
second or faster.
3. Per IEC 61000-4-2, 30A @ 8kV, level 4, clamp measurement
made 30 ns after initiation of pulse, all tests in contact dis-
charge mode.
4. Trigger measurement made using Transmission Line Pulse
(TLP) method.
5. PolySurg™ devices are capable of withstanding up to a 15 kV,
45A ESD pulse. Device ratings are given at 8kV per Note 1,
unless otherwise speci ed.



41206ESDA
Technical Data DS41206
Effective May 2017
41206ESDA
ESD suppressor four-channel
Environmental Specifications:
• Moisture Resistance: MIL-STD-883, Method 1004.7, 85°C, 85%R.H., 240 hrs.
• Thermal shock: MIL-STD-202, Method 107G, -65°C to 125°C, 30 min. cycle, 5 cycles
• Vibration: MIL-STD-202F, Method 201A,(10 to 55 to 10 Hz, 1 min. cycle, 2 hrs each in X-Y-Z)
• Chemical resistance: ASTM D-543, 24 hrs @ 50°C, 3 solutions (H2O, detergent solution, de uxer)
• Full load voltage: Up to 24 VDC, 1000 hrs, 25°C
• Solder leach resistance and terminal adhesion: Per EIA-576
• Solderability: MIL-STD-202, Method 208 (95% coverage)
Product Dimension
E
F
W
Bottom View
L
AH
X
I B CD
EIA Size
L
WH
A
B
41206 3.2 ± 0.2 1.6 ± 0.2 0.8 max 0.38 ± 0.5 0.2 min, 0.4 typ
mm(inch) (.126 ± .008) (.063 ± .008) (.032 max) (.015 ± .002) (.008 min, .16 Typ)
C
0.4 Typ
(.016 Typ)
DEF
0.2 ± 0.1 0.2 Typ 0.38 ± 0.10
(.008 ± .004) (.008 Typ) (.015 ± .004)
IX
0.80 ± 0.02 0.45 ± 0.02
(.03 ± .0008) (.017 ± .0008)
Recommended Solder
Pad Outline
(per IPC-SM-782)
0.5
(.020)
0.8
(.031)
0.7
(.028)
0.8
(.031)
Tape-and-Reel Specification
B
A
4.0±0.1
(.157±.004)
2.0±0.05
(.079±.002)
3.5±0.05
(.138±.002)
8.0±0.2
(.315±.008)
4.0±0.1
(.157±.004)
1.5+0.1/-0
(.056+.004/-0)
Dimension
A
B
41206
3.5+0.2
(.138+.008)
1.9+0.2
(.075+.008)
1.75±0.1
(.059±.004)
20.5
(.807)
13.0±0.5
(.512±.020)
1.0±0.2
(.040±.008)
mm (inches)
2.0
(.080)
10.0±1.5
(.394±.059)
60.0±1.0
(2.362±.040)
178.0±2.0
(7.008±.080)
2 www.eaton.com/electronics





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)