Energy Module. ISP091201 Datasheet

ISP091201 Module. Datasheet pdf. Equivalent

Part ISP091201
Description Bluetooth Low Energy Module
Feature BLE MODULE ISP091201 ISP091201 Bluetooth Low Energy Module with Integrated Antenna Key Features A.
Manufacture Insight SiP
Datasheet
Download ISP091201 Datasheet



ISP091201
BLE MODULE
ISP091201
ISP091201
Bluetooth Low Energy Module
with Integrated Antenna
Key Features
Applications
Single Mode BLE v4.0 Slave
Nordic Semiconductor µBlue products based
Includes transceiver, baseband, software stack
Ultra Low Power Consumption
Single 1.9 to 3.6 V supply
Very small size 8.0 x 12.0 x 1.5 mm
Temperature -40 to 85 °C
Fully integrated RF matching and Antenna
Integrated 16 MHz Crystal Clock
Space constrained BLE Slave Devices
Sport and fitness sensors
Health care sensors
Out of Range (OOR) sensors
Personal User Interface Devices (PUID)
Remote controls
General Description
Certifications
FCC Limited Modular Certification
Complies with CE
Complies with IC
Bluetooth SIG certified
RoHS compliant
This module is based on Nordic Semiconductor
nRF8001 µBlue Bluetooth Low Energy Platform.
The nRF8001 is a single chip transceiver with an
embedded baseband protocol engine, suitable for
ultra low power wireless applications conforming to
the Bluetooth Low Energy Specification contained
within v4.0 of the overall Bluetooth specification.
The nRF8001, used in the current revision of
ISP091201, is a production product using a RoM
for the baseband protocol engine.
The µBlue transceiver is specifically designed for
both PC peripherals and ultra low power
applications such as sports and wellness sensors.
For sensor applications, the ultra low power
consumption and advanced power management
enables battery lifetimes up to several years on a
coin cell battery.
The ISP091201 module size measures 8 x 12 x
1.5 mm. The module integrates all the decoupling
capacitors, the 16 MHz crystal and load capacitors
plus the RF matching circuit and antenna in addi-
tion to the transceiver. As the module has several end applications, the antenna was designed to be
compatible with several ground plane sizes including that of a USB dongle and a cell phone. The module
can operate as a standalone Bluetooth sensor node with the addition of a transducer, a small external
microprocessor to run application software, a 32 kHz crystal and a DC power source.
February 6, 2014
Page 1/14
Document Ref: isp_ble_DS091201_R15.doc
Insight SiP Green Side 400 avenue Roumanille BP 309 06906 Sophia-Antipolis Cedex France www.insightsip.com
The information contained in this document is the property of Insight SiP and should not be disclosed to any third party with out written permission.
Specification subject to change without notice.



ISP091201
BLE MODULE
ISP091201
Contents
1. Electrical Specifications ........................................................................................................... Page 1-2
2. RF Performances .................................................................................................................... Page 1-5
3. Product Development Tools .................................................................................................... Page 1-8
4. Mechanical Outlines ................................................................................................................ Page 1-9
5. Quality & User Information..................................................................................................... Page 1-11
6. Packaging & Storage............................................................................................................. Page 1-14
1. Electrical Specifications
Electrical Performance
Temperature range -40 to +85 °C
Parameter
Min. Supply Voltage
Static levels
Peak current, receiver active
Peak current, transmitter active
Current drain, connection-less state
Current drain between connection events
Supply voltage
Current consumption
Value
1.9
14.6
12.7
0.5
2
Unit
V
mA
mA
µA
µA
Pin Assignment
Pin
15
6
Name
NC
OUT_ANT
Pin function
Not Connected
Antenna In/Out
7 OUT_MOD Module In/Out
8 GND
9 NC
10 MOSI
Ground
Not Connected
Digital input
Description
Isolated pad on application PCB for mechanical stability
This pin is connected to the internal antenna. It should be
connected to Pin 7 OUT_MOD for normal operation. During
certification the pin may be connected to an RF connector for
antenna measurement
This pin is the RF I/O pin of the BLE module. It should be
connected to Pin 6 OUT_ANT for normal operation. During
certification the pin may be connected to an RF connector for
module measurement using a Bluetooth test setup
Should be connected to ground plane on application PCB
Isolated pad on application PCB for mechanical stability
ACI Master Out Slave In
February 6, 2014
Page 2/14
Document Ref: isp_ble_DS091201_R15.doc
Insight SiP Green Side 400 avenue Roumanille BP 309 06906 Sophia-Antipolis Cedex France www.insightsip.com
The information contained in this document is the property of Insight SiP and should not be disclosed to any third party with out written permission.
Specification subject to change without notice.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)