DatasheetsPDF.com

Proximity Sensor. ISL29044 Datasheet

DatasheetsPDF.com

Proximity Sensor. ISL29044 Datasheet






ISL29044 Sensor. Datasheet pdf. Equivalent




ISL29044 Sensor. Datasheet pdf. Equivalent





Part

ISL29044

Description

Low Power Ambient Light and Proximity Sensor



Feature


ISL29044 NORETCROEMCMOMENMDEENISDDLER2D E90PF4LO4AARCNEEMWENDTEPSAIGRNTS Low P ower Ambient Light and Proximity Sensor with Internal IR-LED and Digital Outpu t DATASHEET FN8305 Rev 2.00 April 28, 2016 The ISL29044 is an integrated amb ient and infrared light-to-digital conv erter with a built-in IR LED and I2C In terface (SMBus Compatible). This device uses two independ.
Manufacture

Renesas

Datasheet
Download ISL29044 Datasheet


Renesas ISL29044

ISL29044; ent ADCs for concurrently measuring ambi ent light and proximity in parallel. Th e flexible interrupt scheme is designed for minimal microcontroller utilizatio n. For ambient light sensor (ALS) data conversions, an ADC converts photodiode current (with a light sensitivity rang e up to 2000 Lux) in 100ms per sample. The ADC rejects 50Hz/60Hz flicker noise caused by artific.


Renesas ISL29044

ial light sources. For proximity sensor (Prox) data conversions, the built-in d river turns on an internal infrared LED and the proximity sensor ADC converts the reflected IR intensity to digital. This ADC rejects ambient IR noise (such as sunlight) and has a 5 .


Renesas ISL29044

.

Part

ISL29044

Description

Low Power Ambient Light and Proximity Sensor



Feature


ISL29044 NORETCROEMCMOMENMDEENISDDLER2D E90PF4LO4AARCNEEMWENDTEPSAIGRNTS Low P ower Ambient Light and Proximity Sensor with Internal IR-LED and Digital Outpu t DATASHEET FN8305 Rev 2.00 April 28, 2016 The ISL29044 is an integrated amb ient and infrared light-to-digital conv erter with a built-in IR LED and I2C In terface (SMBus Compatible). This device uses two independ.
Manufacture

Renesas

Datasheet
Download ISL29044 Datasheet




 ISL29044
ISL29044
NORETCROEMCMOMENMDEENISDDLER2DE90PF4LO4AARCNEEMWENDTEPSAIGRNTS
Low Power Ambient Light and Proximity Sensor with Internal IR-LED and Digital
Output
DATASHEET
FN8305
Rev 2.00
April 28, 2016
The ISL29044 is an integrated ambient and infrared
light-to-digital converter with a built-in IR LED and I2C Interface
(SMBus Compatible). This device uses two independent ADCs
for concurrently measuring ambient light and proximity in
parallel. The flexible interrupt scheme is designed for minimal
microcontroller utilization.
For ambient light sensor (ALS) data conversions, an ADC
converts photodiode current (with a light sensitivity range up to
2000 Lux) in 100ms per sample. The ADC rejects 50Hz/60Hz
flicker noise caused by artificial light sources.
For proximity sensor (Prox) data conversions, the built-in driver
turns on an internal infrared LED and the proximity sensor ADC
converts the reflected IR intensity to digital. This ADC rejects
ambient IR noise (such as sunlight) and has a 547μs
conversion time.
The ISL29044 provides low power operation of ALS and
proximity sensing with a typical 133μA normal operation
current (108μA for sensors and internal circuitry, ~25μA for
LED) with 220mA current pulses for a net 100μs, repeating
every 800ms (or under).
The ISL29044 uses both a hardware pin and software bits to
indicate an interrupt event has occurred. An ALS interrupt is
defined as a measurement that is outside a set window. A
proximity interrupt is defined as a measurement over a
threshold limit. The user may also require that both ALS/Prox
interrupts occur at once, up to 16 times in a row before
activating the interrupt pin.
The ISL29044 is designed to operate from 2.25V to 3.63V over
the -40°C to +85°C ambient temperature range. It is
packaged in a clear, lead-free 8 Ld ODFN package.
Features
• Internal LED + Sensor = Complete Solution
• Works under all light sources including sunlight
• Dual ADCs measure ALS/Prox concurrently
• <1.0μA Supply current when powered down
• Temperature compensated
• Pb-Free (RoHS compliant)
Intelligent and Flexible Interrupts
• Independent ALS/Prox interrupt thresholds
• Adjustable interrupt persistency
- 1/4/8/16 consecutive triggers required before interrupt
Applications
• Display and keypad dimming adjustment and proximity
sensing for:
- Mobile devices: Smart phone, PDA, GPS
- Computing devices: Laptop PC, Netbook, Tablet PC
- Consumer devices: LCD-TV, digital picture frame, digital
camera
- Industrial and medical light and proximity sensing
Related Literature
• See AN1436, “Proximity Sensors”
V_LED
V_PULLUP
I2C SLAVE 0
5 LED- LED+ 4
6 IRDR GND 3
7 INT SCL 2
8 SDA VDD 1
ISL29044 C1
0.1µF
C3
0.1µF
R1
RES1
VDD
I2C SLAVE 1 I2C SLAVE_n
C2
1µF
SCL
SCL
SDA
SDA
I2C-DIAGRAM I2C-DIAGRAM
R2
RES1
R3
RES1
I2C MASTER
SCL
SDA
INT
CONTROLLER
FIGURE 1. TYPICAL APPLICATION
100
90
80
70
60
50
40
30
20
10
00
110mA GREY
20 40
220mA WHITE
110mA WHITE
220mA GREY
60 80 100 120 140
DISTANCE (mm)
FIGURE 2. PROXIMITY RESPONSE vs DISTANCE
160
FN8305 Rev 2.00
April 28, 2016
Page 1 of 19




 ISL29044
ISL29044
ISL29044 Block Diagram
ALS PHOTODIODE
ARRAY
VDD
1
LIGHT DATA
PROCESS
ALS AND IR
DUAL CHANNEL
ADCs
IR PHOTODIODE
ARRAY
IREF
FOSC
3
GND
4
LED+
5
LED-
COMMAND
REGISTER
DATA
REGISTER
I2C
INTERRUPT
IR DRIVER
2 SCL
8 SDA
7 INT
6 IRDR
Pin Configuration
ISL29044
(8 LD 2.36X3.94 (mm) OPTICAL CO-PACKAGE)
TOP VIEW
LED- 5
IRDR 6
INT 7
SDA 8
4 LED+
3 GND
2 SCL
1 VDD
Pin Descriptions
PIN# PIN NAME
DESCRIPTIONS
1 VDD Voltage supply 2.25V to 3.63V.
2 SCL I2C clock line can be pulled from 1.7V to above VDD,
3.63V max.
3 GND Ground
4 LED+ Anode of IR LED
5 LED- Cathode of IR LED
6 IRDR IR-LED driver pin - current flows into ISL29044 from
LED cathode.
7 INT Interrupt pin; Logic output (open-drain) for interrupt.
8 SDA I2C data line can be pulled from 1.7V to above VDD,
3.63V max.
Ordering Information
PART NUMBER
(Notes 1, 2, 3)
TEMP. RANGE
(°C)
PACKAGE
Tape & Reel
(Pb-free)
PKG.
DWG. #
ISL29044IROMZ-T7
-40 to +85
8 Ld Optical Co-package
L8.2.36x3.94
ISL29044IROMZ-EVALZ
Evaluation Board
NOTES:
1. Please refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets: molding compounds, die attach materials, NiPdAu plate
(e4 termination finish), which are all RoHS compliant. The ISL29044 is compatible with limited SnPb and Pb-free soldering operations. The ISL29044
is MSL classified. See Tech Brief TB487 (Surface Mount Assembly Guidelines for Optical Co-Package Sensor and LED) for reflow profile and more
information.
3. For more information on MSL please see tech brief TB477.
FN8305 Rev 2.00
April 28, 2016
Page 2 of 19




 ISL29044
ISL29044
Absolute Maximum Ratings (TA = +25°C)
VI2DCDBSuuspPpilny
Voltage
Voltage
between VDD and
(SCL, SDA). . . . . .
GND
.....
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
........
-0.5V to
4.0V
4.0V
I2C Bus Pin Current (SCL, SDA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <10mA
IRDR, LED+Pin Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.5V
INT Pin Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 4.0V
INT Pin Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <10mA
ESD Rating
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2kV
Thermal Information
Thermal Resistance (Typical)
JA (°C/W) JC (°C/W)
8 Ld Optical Module Package (Notes 4, 5)
113
58
Maximum Die Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +90°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see TB487
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
4. JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
5. For JC, the “case temp” location is the center of the exposed metal pad on the package underside.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise
noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
Electrical Specifications VDD = 3.0V, TA = +25°C.
PARAMETER
DESCRIPTION
CONDITION
MIN MAX
(Note 6) TYP (Note 6) UNIT
VDD
SR_VDD
VLED+
Power Supply Range
Power Supply Slew Rate
Voltage Supply for IR LED
VDD Rising Edge between 0.4V and 2.25V
2.25 3.0 3.63 V
0.5 V/ms
5V
IDD_OFF Supply Current when Powered Down
ALS_EN = 0; PROX_EN = 0
IDD_NORM Supply Current for ALS+Prox in Sleep Time
ALS_EN = 1; PROX_EN = 1
IDD_PRX_SLP Supply Current for Prox in Sleep Time
ALS_EN = 0; PROX_EN = 1
IDD_ALS Supply Current for ALS
ALS_EN = 1; PROX_EN = 0
tINTGR_ALS 12-bit ALS Integration/Conversion Time
tINTGR_PROX 8-bit Prox Integration/Conversion Time
DATAALS_0 ALS Result when Dark
EAMBIENT = 0 lux, 2k Range
DATAALS_F Full Scale ALS ADC Code
EAMBIENT > Selected Range Maximum Lux (Note 9)
ΔDATA
DATA
Count Output Variation Over Three Light Sources: Ambient Light Sensing
Fluorescent, Incandescent and Sunlight
88
0.05 0.8 µA
108 135 µA
79 µA
94 µA
100 112 ms
0.51 ms
1 3 Counts
4095 Counts
15 %
DATAALS_1 Light Count Output with LSB of 0.0302 lux/count E = 48lux, Fluorescent (Notes 7,9), ALS_RANGE = 0
1587
Counts
DATAALS_2 Light Count Output With LSB of 0.4824 lux/count E = 288lux, Fluorescent (Note 7,9), ALS_RANGE = 1 447 597 747 Counts
DATAPROX_0 Prox Measurement w/o Object in Path
1 Counts
DATAPROX_F Full Scale Prox ADC Code
255 Counts
tr Rise Time for IRDR Sink Current
RLOAD = 15at IRDR pin, 20% to 80%
500 ns
tf Fall Time for IRDR Sink Current
RLOAD = 15at IRDR pin, 80% to 20%
400 ns
IIRDR_0 IRDR Sink Current
PROX_DR = 0; VIRDR = 0.5V
85 105 125 mA
IIRDR_1 IRDR Sink Current
PROX_DR = 1; VIRDR = 0.5V
208 mA
IIRDR_LEAK IRDR Leakage Current
PROX_EN = 0; VDD = 3.63V (Note 8)
0.001 1
µA
VIRDR
Acceptable Voltage Range on IRDR Pin
Register bit PROX_DR = 0
0.5 4.3 V
tPULSE
FI2C
VI2C
Net IIRDR On Time Per PROX Reading
I2C Clock Rate Range
Supply Voltage Range for I2C Interface
100 µs
400 kHz
1.7 3.63 V
FN8305 Rev 2.00
April 28, 2016
Page 3 of 19



Recommended third-party ISL29044 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)