RI-I17-114A-01 Datasheet: HF-I STANDARD TRANSPONDER INLAYS CD





RI-I17-114A-01 HF-I STANDARD TRANSPONDER INLAYS CD Datasheet

Part Number RI-I17-114A-01
Description HF-I STANDARD TRANSPONDER INLAYS CD
Manufacture etcTI
Total Page 4 Pages
PDF Download Download RI-I17-114A-01 Datasheet PDF

Features: RI-I17-114A-01 www.ti.com Tag-it™ HF -I STANDARD TRANSPONDER INLAYS CD SCBS 819 – DECEMBER 2005 FEATURES • ISO /IEC 15693-2,-3; ISO/IEC 18000-3 Compli ant • 13.56-MHz Operating Frequency 256-Bit User Memory in 8-Bit × 32-B it Blocks • Application Family Identi fier (AFI) • Fast Simultaneous Identi fication (Anti-Collision) APPLICATIONS • Product Authentication • Library • Supply-Chain Management • Asset Management • Ticketing/Stored Value DESCRIPTION Texas Instruments Tag-it™ HF-I standard transponder inlays consi st of 13.56-MHz high-frequency (HF) tra nsponders that are compliant with the I SO/IEC 15693 and ISO/IEC 18000-3 global open standards. These products offer a user-accessible memory of 256 bits, or ganized in eight blocks, and an optimiz ed command set available in five differ ent antenna shapes, with frequency offs et for integration into paper, PVC, or other substrates. SPECIFICATIONS (1) Supported standard Recommended operating frequency Passive resonance frequency (at 25°C) T.

Keywords: RI-I17-114A-01, datasheet, pdf, etcTI, HF-I, STANDARD, TRANSPONDER, INLAYS, CD, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

RI-I17-114A-01
www.ti.com
Tag-it™ HF-I STANDARD TRANSPONDER INLAYS
CD
SCBS819 – DECEMBER 2005
FEATURES
ISO/IEC 15693-2,-3; ISO/IEC 18000-3
Compliant
13.56-MHz Operating Frequency
256-Bit User Memory in 8-Bit × 32-Bit Blocks
Application Family Identifier (AFI)
Fast Simultaneous Identification
(Anti-Collision)
APPLICATIONS
Product Authentication
Library
Supply-Chain Management
Asset Management
Ticketing/Stored Value
DESCRIPTION
Texas Instruments Tag-it™ HF-I standard transponder inlays consist of 13.56-MHz high-frequency (HF)
transponders that are compliant with the ISO/IEC 15693 and ISO/IEC 18000-3 global open standards. These
products offer a user-accessible memory of 256 bits, organized in eight blocks, and an optimized command set
available in five different antenna shapes, with frequency offset for integration into paper, PVC, or other
substrates.
SPECIFICATIONS (1)
Supported standard
Recommended operating frequency
Passive resonance frequency (at 25°C)
Typical required activation field strength to read (at 25°C)
Typical required activation field strength to write (at 25°C)
Factory-programmed read-only number
Memory (user programmable)
Typical programming cycles (at 25°C)
Data retention time (at 55°C)
Simultaneous identification of tags
PART NUMBER
RI-I17-114A-01
ISO/IEC 15693-2, -3; ISO/IEC 18000-3
13.56 MHz
13.80 MHz ± 400 kHz (includes frequency offset to compensate further
integration into paper or PVC lamination)
110 dBµA/m(2)
113 dBµA/m(2)
64 bits
256 bits organized in 8-bit × 32-bit blocks
100,000
>10 years
Up to 50 tags per second (reader/antenna dependent)
Antenna size
Foil width
Foil pitch
Outer diameter: ø 32.5 mm +0.1 mm/–0.2 mm (~1.28 in)
Inner diameter: min. ø 18 mm (~0.7 in)
48 mm ± 0.5 mm (1.89 in ± 0.02 in)
50.8 mm +0.1 mm/–0.4 mm (2 in)
Base material
Operating temperature
Storage temperature (single inlay)
Storage temperature (on reel)
Substrate: PET (polyethylenetherephtalate)
Antenna: Aluminum
–25°C to 70°C
–40°C to 85°C (warpage may occur at upper temperature range)
–40°C to 40°C
(1) For highest possible read-out coverage, operate readers at a modulation depth of 20% or higher.
(2) After integration into paper
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Tag-it is a trademark of Texas Instruements.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005, Texas Instruments Incorporated

           






Index : 0  1  2  3   4  5  6  7   8  9  A  B   C  D  E  F   G  H  I  J   K  L  M  N   O  P  Q  R   S  T  U  V   W  X  Y  Z
@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)