THCV241A Datasheet | SerDes transmitter





(Datasheet) THCV241A Datasheet PDF Download

Part Number THCV241A
Description SerDes transmitter
Manufacture THine Electronics
Total Page 30 Pages
PDF Download Download THCV241A Datasheet PDF

Features: THCV241A_Rev.1.00_E THCV241A SerDes tra nsmitter with bi-directional transceive r 1 General Description THCV241A is de signed to support 1080p60 2Mpixel uncom pressed video data over 15m 100ohm diff erential STP or single-end 50ohm Coaxia l cable with 4 in-line connectors betwe en camera and processor by V-by-One® H S. THCV241A supports a MIPI CSI-2. Each CSI-2 data lane can transmit up to 1.2 Gbps/lane. Virtual channel is supported . One high-speed V-by-One® HS lane can transmit up to 1080p60fps. The maximum serial data rate is 4Gbps/lane. 2nd ou tput lane supports HDR large amount of data or data copy-and-distribution expe rience. THCV241A is capable to control and monitor camera module from remote E CU via GPIO, UART or 1Mbps 2-wire seria l interface. Several fault and error de tection function including CRC provides hardware functional safety design. 2 Features  MIPI CSI-2 with 1,2 or 4-l ane input  MIPI D-PHY supports 80Mbp s~1.2Gbps  MIPI Virtual channel supported  Video formats: RAW8/10/1.

Keywords: THCV241A, datasheet, pdf, THine Electronics, SerDes, transmitter, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

THCV241A_Rev.1.00_E
THCV241A
SerDes transmitter with bi-directional transceiver
1 General Description
THCV241A is designed to support 1080p60 2Mpixel
uncompressed video data over 15m 100ohm
differential STP or single-end 50ohm Coaxial cable
with 4 in-line connectors between camera and
processor by V-by-One® HS.
THCV241A supports a MIPI CSI-2. Each CSI-2 data
lane can transmit up to 1.2Gbps/lane. Virtual channel
is supported.
One high-speed V-by-One® HS lane can transmit up
to 1080p60fps. The maximum serial data rate is
4Gbps/lane. 2nd output lane supports HDR large
amount of data or data copy-and-distribution
experience.
THCV241A is capable to control and monitor
camera module from remote ECU via GPIO, UART or
1Mbps 2-wire serial interface.
Several fault and error detection function including
CRC provides hardware functional safety design.
2 Features
MIPI CSI-2 with 1,2 or 4-lane input
MIPI D-PHY supports 80Mbps~1.2Gbps
MIPI Virtual channel supported
Video formats: RAW8/10/12/14/16/20,
YUV422/420, RGB888/666/565, JPEG, User-
defined generic 8-bit
V-by-One® HS 400Mbps~4Gbps x2lane
V-by-One® HS standard version1.5
Reference clock input CKI range 10~40MHz
shareable with video source CMOS sensor
Wide range IO voltage from 1.7V to 3.6V
Additional spread spectrum to reduce EMI
2-wire serial interface 1Mbps bridge function
Remote GPIO/UART control and monitoring
Error detection including CRC and notification
QFN40 5x5mm 0.4mm pitch Exp-pad package
3 Block Diagram
MIPI CSI-2
Rx 4-lane
RD3p
RD3n
RD1p
RD1n
RCKp
RCKn
RD0p
RD0n
RD2p
RD2n
CKI
Settings
GPIO
2-wire
serial I/F
THCV241A
Controls
OSC
V-by-One® HS
Tx 2 lane
TX0N
TX0P
TX1N
TX1P
Sub-Link
TCMN
TCMP
Copyright©2019 THine Electronics, Inc.
1/70
THine Electronics, Inc.
Security D

                    
                    






Index : 0  1  2  3   4  5  6  7   8  9  A  B   C  D  E  F   G  H  I  J   K  L  M  N   O  P  Q  R   S  T  U  V   W  X  Y  Z
@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)