Sensor Transponder. RF430FRL152H Datasheet

RF430FRL152H Datasheet PDF, Equivalent


Part Number

RF430FRL152H

Description

NFC ISO 15693 Sensor Transponder

Manufacture

etcTI

Total Page 30 Pages
PDF Download
Download RF430FRL152H Datasheet PDF


RF430FRL152H Datasheet
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
RF430FRL152H, RF430FRL153H, RF430FRL154H
SLAS834C – NOVEMBER 2012 – REVISED DECEMBER 2014
RF430FRL15xH NFC ISO 15693 Sensor Transponder
1 Device Overview
1.1 Features
1
• ISO/IEC 15693, ISO/IEC 18000-3 (Mode 1)
Compliant RF Interface
• Power Supply System With Either Battery or
13.56-MHz H-Field Supply
• 14-Bit Sigma-Delta Analog-to-Digital Converter
(ADC)
• Internal Temperature Sensor
• Resistive Sensor Bias Interface
• CRC16 CCITT Generator
• MSP430™ Mixed-Signal Microcontroller
– 2KB of FRAM
– 4KB of SRAM
– 8KB of ROM
– Supply Voltage Range: 1.45 V to 1.65 V
– Low Power Consumption
• Active Mode (AM): 140 µA/MHz (1.5 V)
• Standby Mode (LPM3): 16 µA
– 16-Bit RISC Architecture
– Up to 2-MHz CPU System Clock
– Compact Clock System
• 4-MHz High-Frequency Clock
• 256-kHz Internal Low-Frequency Clock
Source
• External Clock Input
– 16-Bit Timer_A With Three Capture/Compare
Registers
– LV Port Logic
• VOL Lower Than 0.15 V at 400 µA
• VOH Higher Than (VDDB – 0.15 V) at 400 µA
• Timer_A PWM Signal Available on All Ports
– eUSCI_B Module Supports 3-Wire and 4-Wire
SPI and I2C
– 32-Bit Watchdog Timer (WDT_A)
– ROM Development Mode (Map ROM Addresses
to SRAM to Enable Firmware Development)
– Full 4-Wire JTAG Debug Interface
• For Complete Module Descriptions, See the
RF430FRL15xH Family Technical Reference
Manual (SLAU506)
• For Application Operation and Programming, See
the RF430FRL15xH Firmware User's Guide
(SLAU603)
1.2 Applications
• Industrial Wireless Sensors
• Medical Wireless Sensors
1.3 Description
The RF430FRL15xH device is a 13.56-MHz transponder chip with a programmable 16-bit MSP430™ low-
power microcontroller. The device features embedded universal FRAM nonvolatile memory for storage of
program code or user data such as calibration and measurement data. The RF430FRL15xH supports
communication, parameter setting, and configuration through the ISO/IEC 15693, ISO/IEC 18000-3
compliant RFID interface and the SPI or I2C interface. Sensor measurements are supported by the
internal temperature sensor and the onboard 14-bit sigma-delta analog-to-digital converter (ADC), and
digital sensors can be connected through SPI or I2C.
The RF430FRL15xH device is optimized for operation in fully passive (battery-less) or single-cell battery-
powered (semi-active) mode to achieve extended battery life in portable and wireless sensing applications.
FRAM is a nonvolatile memory that combines the speed, flexibility, and endurance of SRAM with the
stability and reliability of flash, all at lower total power consumption.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.

RF430FRL152H Datasheet
RF430FRL152H, RF430FRL153H, RF430FRL154H
SLAS834C – NOVEMBER 2012 – REVISED DECEMBER 2014
www.ti.com
PART NUMBER
RF430FRL152H
RF430FRL153H
RF430FRL154H
Device Information(1)
PACKAGE
VQFN (24)
VQFN (24)
VQFN (24)
BODY SIZE(2)
4 mm x 4 mm
4 mm x 4 mm
4 mm x 4 mm
(1) For the most current part, package, and ordering information for all available devices, see the Package
Option Addendum in Section 9, or see the TI web site at www.ti.com.
(2) The sizes shown here are approximations. For the package dimensions with tolerances, see the
Mechanical Data in Section 9.
1.4 Functional Block Diagram
Figure 1-1 shows the block diagram of the RF430FRL15xH device.
RST/NMI
P1.0 to P1.7
VDDB VSS VDDH
CLKIN
TMS, TCK,
TDI, TDO
LF-OSC
HF-OSC
Clock
System
ACLK
SMCLK
Reset
Int-Logic
MCLK
CPU and
Working
Registers
MAB
8KB
ROM
4KB
RAM
2KB
FRAM
CRC
16 bit
IO Port
8 I/Os
with
interrupt
capability
4W-JTAG
Debug
support
eUSCI_B0
SPI
I2C
Timer_A
3 CC
Registers
Watchdog
WDTA
32/16 Bit
14-Bit
Sigma-
Delta
ADC
ISO
15693
Decode
and
Encode
Power
Supply
System
VDDSW
VDD2X
VDDD
CP1
CP2
ISO
15693
Analog
Front End
ANT2
CRES
ANT1
LRES
ADC0/ADC1/ADC2
TEMP1/TEMP2
Figure 1-1. Functional Block Diagram
2 Device Overview
Copyright © 2012–2014, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: RF430FRL152H RF430FRL153H RF430FRL154H


Features Datasheet pdf Product Folder Sample & Buy Technical Documents Tools & Software Support & Community RF430FRL152H, RF430FRL153H, RF430FRL154H SLAS834C – NOVEMBER 2012 – REVISED DECEMBER 2014 RF430FRL15xH NFC ISO 15693 Sensor Transponder 1 De vice Overview 1.1 Features 1 • ISO/I EC 15693, ISO/IEC 18000-3 (Mode 1) Comp liant RF Interface • Power Supply Sys tem With Either Battery or 13.56-MHz H- Field Supply • 14-Bit Sigma-Delta Ana log-to-Digital Converter (ADC) • Inte rnal Temperature Sensor • Resistive S ensor Bias Interface • CRC16 CCITT Ge nerator • MSP430™ Mixed-Signal Micr ocontroller – 2KB of FRAM – 4KB of SRAM – 8KB of ROM – Supply Voltage Range: 1.45 V to 1.65 V – Low Power C onsumption • Active Mode (AM): 140 µ A/MHz (1.5 V) • Standby Mode (LPM3): 16 µA – 16-Bit RISC Architecture – Up to 2-MHz CPU System Clock – Compa ct Clock System • 4-MHz High-Frequenc y Clock • 256-kHz Internal Low-Frequ ency Clock Source • External Clock Input – 16-Bit Timer_A With Three Capture/Compare Registers – LV Port Logi.
Keywords RF430FRL152H, datasheet, pdf, etcTI, NFC, ISO, 15693, Sensor, Transponder, F430FRL152H, 430FRL152H, 30FRL152H, RF430FRL152, RF430FRL15, RF430FRL1, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)