Optocouplers. HCPL-0630 Datasheet

HCPL-0630 Datasheet PDF


Part

HCPL-0630

Description

High Speed TTL Compatible Optocouplers

Manufacture

Broadcom

Page 30 Pages
Datasheet
Download HCPL-0630 Datasheet


HCPL-0630 Datasheet
6N137, HCNW137, HCNW2601, HCNW2611,
HCPL-0600, HCPL-0601, HCPL-0611, HCPL-0630,
HCPL-0631, HCPL-0661, HCPL-2601, HCPL-2611,
HCPL-2630, HCPL-2631, HCPL-4661
High CMR, High Speed TTL Compatible Optocouplers
Data Sheet
Description
The Broadcom® 6N137, HCPL-26xx/06xx/4661,
HCNW137/26x1 are optically coupled gates that combine a
GaAsP light emitting diode and an integrated high gain
photo detector. An enable input allows the detector to be
strobed. The output of the detector IC is an open collector
Schottky-clamped transistor. The internal shield provides a
guaranteed common mode transient immunity specification
up to 15,000 V/µs at Vcm = 1000V.
This unique design provides maximum AC and DC circuit
isolation while achieving TTL compatibility. The optocoupler
AC and DC operational parameters are guaranteed from –
40°C to +85°C allowing trouble-free system performance.
Functional Diagram
6N137, HCPL-2601/2611
HCPL-0600/0601/0611
NC 1
8 VCC
ANODE 2
7 VE
CATHODE 3
6 VO
NC 4 SHIELD
5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED ENABLE OUTPUT
ON H
L
OFF H
H
ON L
H
OFF L
H
ON NC
L
OFF NC
H
HCPL-2630/2631/4661
HCPL-0630/0631/0661
ANODE 1 1
8 VCC
CATHODE 1 2
7 VO1
CATHODE 2 3
6 VO2
ANODE 2 4 SHIELD 5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED OUTPUT
ON L
OFF H
NOTE: A 0.1-µF bypass capacitor must be connected as
close as possible between pins 5 and 8.
CAUTION! Take normal static precautions in handling and
assembly of this component to prevent damage
and/or degradation that may be induced by ESD.
Broadcom
Features
15 kV/µs minimum Common Mode Rejection (CMR) at
VCM= 1 kV for HCNW2611, HCPL-2611, HCPL-4661,
HCPL-0611, HCPL-0661
High speed: 10 MBd typical
LSTTL/TTL compatible
Low input current capability: 5 mA
Guaranteed AC and DC performance over temperature:
–40°C to +85°C
Available in 8-Pin DIP, SOIC-8, widebody packages
Strobable output (single channel products only)
Safety approval
– UL recognized – 3750 Vrms for 1 minute and
5000 Vrms for 1 minute per UL1577 CSA approved
(5000 Vrms/1 Minute rating is for HCNW137/26X1
and Option 020 [6N137, HCPL-2601/11/30/31,
HCPL-4661] products only)
– IEC/EN/DIN EN 60747-5-5 approved with:
VIORM = 567 Vpeak for 06xx Option 060
VIORM = 630 Vpeak for 6N137/26xx Option 060
VIORM =1414 Vpeak for HCNW137/26x1
MIL-PRF-38534 hermetic version available (HCPL-
56xx/66xx)
Applications
Isolated line receiver
Computer-peripheral interfaces
Microprocessor system interfaces
Digital isolation for A/D, D/A conversion
Switching power supply
Instrument input/output isolation
Ground loop elimination
Pulse transformer replacement
Power transistor isolation in motor drives
Isolation of high speed logic systems
AV02-0940EN
April 12, 2019

HCPL-0630 Datasheet
6N137, HCNW137, HCNW2601, HCNW2611, HCPL-0600, HCPL-0601, HCPL-
0611, HCPL-0630, HCPL-0631, HCPL-0661, HCPL-2601, HCPL-2611, HCPL-
2630, HCPL-2631, HCPL-4661 Data Sheet
High CMR, High Speed TTL Compatible Optocouplers
The 6N137, HCPL-26xx, HCPL-06xx, HCPL-4661, HCNW137, and HCNW26x1 are suitable for high speed logic interfacing,
input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate and are
recommended for use in extremely high ground or induced noise environments.
Selection Guide
Minimum CMR
8-Pin DIP (300 Mil)
Small-Outline SO-8
Widebody
(400 Mil)
Input On-
dV/dt
Current
(V/µs) VCM (V) (mA)
Output
Enable
1000 10
5
5,000 1,000 5
10,000 1,000
15,000 1,000
1,000 50
YES
YES
NO
YES
NO
YES
NO
YES
3,500 300
YES
1,000 50
3
YES
NO
1,000b 1,000
YES
NO
1,000 50
12.5
c
Single
Channel
Package
6N137
HCPL-2601
HCPL-2611
HCPL-2602a
HCPL-2612a
HCPL-261Aa
HCPL-261Na
Dual Channel
Package
Single
Channel
Package
HCPL-2630
HCPL-2631
HCPL-4661
HCPL-0600
HCPL-0601
HCPL-0611
HCPL-263Aa
HCPL-263Na
HCPL-061Aa
HCPL-061Na
Dual Channel
Package
Single
Channel
Package
HCPL-0630
HCPL-0631
HCPL-0661
HCNW137
HCNW2601
HCNW2611
HCPL-063Aa
HCPL-063Na
a. Technical data are on separate Broadcom publications.
b. 15 kV/µs with VCM = 1 kV can be achieved using Broadcom application circuit.3.
c. Enable is available for single channel products only, except for HCPL-193x devices.
Hermetic
Single and
Dual Channel
Packages
HCPL-193xa
HCPL-56xxa
HCPL-66xxa
Ordering Information
HCPL-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577.
HCNWxxxx is UL Recognized with 5000 Vrms for 1 minute per UL1577.
Broadcom
AV02-0940EN
2


Features Datasheet pdf 6N137, HCNW137, HCNW2601, HCNW2611, HCPL -0600, HCPL-0601, HCPL-0611, HCPL-0630, HCPL-0631, HCPL-0661, HCPL-2601, HCPL- 2611, HCPL-2630, HCPL-2631, HCPL-4661 H igh CMR, High Speed TTL Compatible Opto couplers Data Sheet Description The B roadcom® 6N137, HCPL-26xx/06xx/4661, H CNW137/26x1 are optically coupled gates that combine a GaAsP light emitting di ode and an integrated high gain photo d etector. An enable input allows the det ector to be strobed. The output of the detector IC is an open collector Schott ky-clamped transistor. The internal shi eld provides a guaranteed common mode t ransient immunity specification up to 1 5,000 V/µs at Vcm = 1000V. This unique design provides maximum AC and DC circ uit isolation while achieving TTL compa tibility. The optocoupler AC and DC ope rational parameters are guaranteed from – 40°C to +85°C allowing trouble-f ree system performance. Functional Diag ram 6N137, HCPL-2601/2611 HCPL-0600/06 01/0611 NC 1 8 VCC ANODE 2 7 VE CATHODE 3 6 VO NC 4 SHIELD 5 .
Keywords HCPL-0630, datasheet, pdf, Broadcom, High, Speed, TTL, Compatible, Optocouplers, CPL-0630, PL-0630, L-0630, HCPL-063, HCPL-06, HCPL-0, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)