SIDACs. K2000EH70 Datasheet

K2000EH70 Datasheet PDF


Part

K2000EH70

Description

High Energy Bidirectional SIDACs

Manufacture

Littelfuse

Page 10 Pages
Datasheet
Download K2000EH70 Datasheet


K2000EH70 Datasheet
Kxxx0yH Series
Teccor® brand Thyristors
High Energy Bidirectional SIDACs
RoHS
Schematic Symbol
Description
The new Kxxx0yH is a higher energy SIDAC switch for gas
ignition applications requiring higher current pulse current
especially at low repetition rate. It is offered in a DO-15 and
TO-92 leaded packages as well as DO-214 surface mount
package. Voltage activation of this solid state switch is
accomplished with peak voltage level of 190 to 280Volts. The
SIDAC is a silicon bilateral voltage triggered Thyristor switch
that switches on through a negative resistance region to a
low on-state voltage. Conduction will continue until current
is interrupted or lowered below minimum holding current of
the device.
Features
• A C Circuit Oriented
• T riggering Voltage of 190
to 280V
• 2 80A Pulse Current
Capability
• RoHS Compliant
Applications
Suitable for high voltage power supplies, natural gas
igniters, and Xenon flash ignition.
Electrical Specifications (TJ = 25°C, unless otherwise specified)
Symbol
VBO
VDRM
IT(RMS)
VTM
IH
Parameters
Breakover/Trigger Voltage
Repetitive Peak Off-state Voltage
On-state RMS Current
Peak On-state Voltage
Dynamic Holding Current
Test Conditions
K2000yH
K2200yH
K2400yH
K2500yH
K2000yH
K2200yH
K2400yH
K2500yH
50/60Hz, TJ < 125°C
IT = 1A
RL = 100Ω
50/60Hz Sine Wave
RS
Switching
Resistance,
RS=
(_V_B_O__–_V_S_)
(IS – IBO)
IBO
ITRM
di/dt
dv/dt
TS
TJ
Breakover Current
Peak Repetitive Pulse Current
(refer to figure 4)
Critical Rate of Rise of On-State Current
Critical Rate of Rise of Off-State Voltage
Storage Temperature Range
Junction Temperature Range
RθJL Thermal Resistance, Junction to Lead
RθJC Thermal Resistance, Junction to Case
RθJA Thermal Resistance, Junction to Ambient
Note: xxx - voltage, y = package
50/60Hz Sine Wave
50/60Hz Sine Wave
tp = 10μs
60Hz
5Hz
DO-15
DO-214
TO-92
DO-15
TO-92
Min
Max
Unit
190 215
205
220
230
250
V
240 280
180
180
190
V
200
1A
1.5 V
150 mA
100
1500
-40
-40
Ω
50 μA
120
280
A
150 A/μs
V/μs
150 °C
125 °C
18
30
°C/W
35 °C/W
75
95
°C/W
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14

K2000EH70 Datasheet
Teccor® brand Thyristors
High Energy Bidirectional SIDACs
Figure 1: V-I Characteristics
IT
IH
IS
-V IDRM IBO
RS
=
(VBO
(IS -
- VS)
IBO)
+I
RS
VT VSVBO
VDRM
+V
-I
Figure 3: Power Dissipation vs. On-state Current
(Typical)
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0.0
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE:
See basic SIDAC circuit in Figure 12
0.2 0.4 0.6 0.8 1.0
RMS On-State Current [IT(RMS)] - Amps
1.2
Figure 5: Surge Peak On-state Current
vs. Number of Cycles
100
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
VRaMluSeOaNt -SSpTeAcTifiEeCdUJRuRnEcNtioT:nITTRemMpSeMraatxuirme um Rated
10
Notes:
1) Blocking capability may be lost during
and immediately following surge
current interval.
2) Overload may not be repeated until
junction temperature has returned
to steady-state rated value.
1
1 10 100
Surge Current Duration -- Full Cycles
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
1000
Figure 2: O n-state Current vs. On-state
Voltage (Typical)
9
8
7
6
5
4
3
2
1
0
0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Instantaneous On-state Voltage (vT) – Volts
Figure
4:
R epetitive Peak
vs. Pulse Width
aOtnV-asrtiaotuesCFurrerqeunet n(IcTiReMs)
1000
di/dt Limit Line
100
1 kHz
5 kHz
10
ITM
tO
1/f
5 Hz
60 Hz
1
1 10 100 1000
Pulse Base Width (tO) - us
Figure 6: Nvso.rJmuanlciztieodnVTBeOmCphearnagtuere
10%
8%
6%
4%
2%
0%
-2%
-4%
-6%
-8%
-40
-20
0 20 40 60 80 100 120 140
Junction Temperature (TJ) -- °C


Features Datasheet pdf Kxxx0yH Series Teccor® brand Thyristor s High Energy Bidirectional SIDACs RoH S Schematic Symbol Description The ne w Kxxx0yH is a higher energy SIDAC swit ch for gas ignition applications requir ing higher current pulse current especi ally at low repetition rate. It is offe red in a DO-15 and TO-92 leaded package s as well as DO-214 surface mount packa ge. Voltage activation of this solid st ate switch is accomplished with peak vo ltage level of 190 to 280Volts. The SID AC is a silicon bilateral voltage trigg ered Thyristor switch that switches on through a negative resistance region to a low on-state voltage. Conduction wil l continue until current is interrupted or lowered below minimum holding curre nt of the device. Features • A C C ircuit Oriented • T riggering Volta ge of 190 to 280V • 2 80A Pulse Cu rrent Capability • RoHS Compliant Applications Suitable for high voltage power supplies, natural gas igniters, a nd Xenon flash ignition. Electrical Specifications (TJ = 25°C, unless o.
Keywords K2000EH70, datasheet, pdf, Littelfuse, High, Energy, Bidirectional, SIDACs, 2000EH70, 000EH70, 00EH70, K2000EH7, K2000EH, K2000E, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)