Converter. DTE1024S48 Datasheet

DTE1024S48 Datasheet PDF


Part

DTE1024S48

Description

DC-DC Converter

Manufacture

XP Power

Page 4 Pages
Datasheet
Download DTE1024S48 Datasheet


DTE1024S48 Datasheet
DTE10 Series
DC-DC Converter
10 Watts
xxx Series• Regulated single & dual outputs from 5VDC to 48VDC
• Wide 4:1 input range
• Fully encapsulated chassis mount
• Optional DIN rail version
• IEC/UL/cUL62368-1 safety approvals
• EN55032 class A with no external components
• Remote on/off
• 3kVDC isolation
• -40°C to +105°C operating temperature
• Full power to 80°C
• MTBF >4Mhrs (MIL-HBDK-27F, +25°C GB)
• 3 year warranty
Dimensions:
DTE10:
3.11 x 1.34 x 0.87” (79.0 x 34.0 x 22.0 mm)
Available in two wide (4:1) input ranges for nominal 12/24VDC and 24/48VDC, the DTE10 series of encapsulated 10W DC-DC converters are
chassis mount as standard or can be ordered with a DIN rail mount. They have screw terminals for ease of connection and an LED provides
clear ‘power good’ indication. Remote On/Off is standard and when inhibited the standby current is just 2.5mA. Isolation is 3kVDC input/output
providing excellent separation between supply and load. The modules are fully protected against input undervoltage, short circuit and overload
conditions. These features, along with a rugged design and wide operating temperature range make the DTE10 series suitable for a variety of
commercial and industrial applications.
Models & Ratings
Input Voltage Output Voltage Output Current
Input Current(1,4)
No Load
Full Load
Maximum
Capacitive Load(5)
Efficiency(2)
Model Number(3)
24V
(9-36V)
48V
(18-75V)
5.1 V
12.0 V
15.0 V
24.0 V
48.0 V
±12.0 V
±15.0 V
±24.0 V
5.1 V
12.0 V
15.0 V
24.0 V
48.0 V
±12.0 V
±15.0 V
±24.0 V
2.00 A
0.833 A
0.666 A
0.418 A
0.208 A
±0.416 A
±0.333 A
±0.208 A
2.00 A
0.833 A
0.666 A
0.418 A
0.208 A
±0.416 A
±0.333 A
±0.208 A
30 mA
30 mA
30 mA
30 mA
30 mA
30 mA
30 mA
30 mA
20 mA
20 mA
20 mA
20 mA
20 mA
20 mA
20 mA
20 mA
506 mA
484 mA
484 mA
484 mA
495 mA
484 mA
484 mA
489 mA
253 mA
242 mA
242 mA
242 mA
248 mA
242 mA
242 mA
245 mA
1000 µF
470 µF
330 µF
150 µF
68 µF
±220 µF
±150 µF
±68 µF
1000 µF
470 µF
330 µF
150 µF
68 µF
±220 µF
±150 µF
±68 µF
84%
86%
86%
86%
84%
86%
86%
85%
84%
86%
86%
86%
84%
86%
86%
85%
DTE1024S5V1
DTE1024S12
DTE1024S15
DTE1024S24
DTE1024S48
DTE1024D12
DTE1024D15
DTE1024D24
DTE1048S5V1
DTE1048S12
DTE1048S15
DTE1048S24
DTE1048S48
DTE1048D12
DTE1048D15
DTE1048D24
Notes
1. Input current measured at nominal input voltage.
4. Input current is typically 2.5mA at nominal input voltage when output is remotely
2. Typical values.
turned off.
3. For optional version fitted with DIN Clip add suffix ‘-D’ e.g. DTE1024S24-D.
5. Per output.
DIN Rail mounting clip is available as a separate item, order code DTE10 DIN CLIP.
1 www.xppower.com

DTE1024S48 Datasheet
DTE10 Series
DC-DC Converter
Input
Characteristic
Input Voltage Range
Input Current
Inrush Current
External Fuse Required
Input Filter
Undervoltage Lockout
Input Surge
Remote On/Off
Minimum
9
18
Typical
Maximum
36
75
89/161
2A/1A timelag 24V/48V nominal
Pi type
On at >9 V. Off <8.0 V
On at >18 V. Off <16.0 V
50
100
On: Logic High (3.5-12 V) or open circuit
Off: Logic Low (<1.2 V) or short pin 1 to pin 2
Units
VDC
VDC
A
Notes & Conditions
12V & 24V nominal input voltage
24V & 48V nominal input voltage
See Models and Ratings table
DTE1024/DTE1048 series
VDC
VDC
DTE1024 series
DTE1048 series
DTE1024 series for 1s
DTE1048 series for 1s
Output
Characteristic
Output Voltage
Initial Set Accuracy
Minimum Load
Start Up Delay
Line Regulation
Load Regulation
Cross Regulation
Transient Response
Ripple & Noise
Short Circuit Protection
Overload Protection
Temperature Coefficient
Minimum
5.1
0
Typical
90
180
150
Maximum
48
±2
60
±0.5
±0.5
±5
±5
±0.02
Units
V
%
A
ms
%
%
%
% deviation
mV pk-pk
%
%/ ˚C
Notes & Conditions
See models and ratings table
At full load
No minimum load required
At nominal input voltage
From minimum to maximum input voltage
0 - 100% load
On dual output models with one output at 25% load and the
other varied from 10% to 100% load.
Recovery to within 1% in <500µs for a 25% load change
5V-15V output models, 20MHz bandwidth
24V, 48V output models, 20MHz bandwidth
Trip & Restart (hiccup mode), auto recovery
Trip & Restart (hiccup mode)
General
Characteristic
Efficiency
Isolation
Isolation Resistance
Input to Output Capacitance
Switching Frequency
Power Density
Mean Time Between Failure
Case Material
Weight
Minimum
Typical
Maximum
86
3000
1000
2200
330
3.8
4100
Epoxy potted in plastic case, UL94V-0
0.145 (66.0)
Environmental
Characteristic
Operating Temperature
Storage Temperature
Case Temperature
Thermal Impendance
Humidity
Cooling
Altitude
Shock and Vibration
Minimum
-40
-50
5
Typical
4.3
Tested to EN60068-2
Maximum
+105
+125
+105
95
5000
Units
%
VDC
MΩ
pF
kHz
W/in3
kHrs
lb (g)
Notes & Conditions
See Models and Ratings table
For 60s functional
At 500VDC
At 100KHz, 1V
MIL-HDBK-217F, +25°C GB
DIN rail option add 0.240 (109)
Units
°C
°C
°C
°C/W
%RH
m
Notes & Conditions
See derating curve
Natural convection, 20 LFM case to air
Non-condensing
Natural convection
Operating
www.xppower.com
2


Features Datasheet pdf DTE10 Series DC-DC Converter 10 Watts xxx Series• Regulated single & dual outputs from 5VDC to 48VDC • Wide 4:1 input range • Fully encapsulated cha ssis mount • Optional DIN rail versio n • IEC/UL/cUL62368-1 safety approval s • EN55032 class A with no external components • Remote on/off • 3kVDC isolation • -40°C to +105°C operati ng temperature • Full power to 80°C • MTBF >4Mhrs (MIL-HBDK-27F, +25°C G B) • 3 year warranty Dimensions: DTE 10: 3.11 x 1.34 x 0.87” (79.0 x 34.0 x 22.0 mm) Available in two wide (4:1) input ranges for nominal 12/24VDC and 24/48VDC, the DTE10 series of encapsula ted 10W DC-DC converters are chassis mo unt as standard or can be ordered with a DIN rail mount. They have screw termi nals for ease of connection and an LED provides clear ‘power good’ indicat ion. Remote On/Off is standard and when inhibited the standby current is just 2.5mA. Isolation is 3kVDC input/output providing excellent separation between supply and load. The modules are fully protected against i.
Keywords DTE1024S48, datasheet, pdf, XP Power, DC-DC, Converter, TE1024S48, E1024S48, 1024S48, DTE1024S4, DTE1024S, DTE1024, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)