Chip Capacitors. X7R Datasheet

X7R Datasheet PDF, Equivalent


Part Number

X7R

Description

Surface Mount Multilayer Ceramic Chip Capacitors

Manufacture

Vishay

Total Page 5 Pages
PDF Download
Download X7R Datasheet


X7R Datasheet
www.vishay.com
VJ Safety Certified Capacitors X7R
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Safety Certified Applications
FEATURES
• Approved IEC 60384-14
• Specialty: safety certified capacitors
• AEC-Q200 qualified available with PPAP for
size 2008 and 2220
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
Available
APPLICATIONS
• Power supplies
• EMI and AC line filtering
• EV charging systems
• AC equipment and appliances
• Lighting strike and voltage surge protection
• Isolators
• Facsimile and telephone
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range X1 / Y2 (1): 100 pF to 4.7 nF
Capacitance Range X2 (1): 100 pF to 12 nF
Voltage Range: 250 VAC
Temperature Coefficient of Capacitance (TCC):
± 15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF) (1):
C < 100 pF: 8 % maximum
C 100 pF: 2.5 % maximum
Note
(1) Test conditions per IEC 60384-14:
Voltage: 1.0 VRMS
C < 100 pF at 1 MHz
C 100 pF at 1 kHz
Insulating Resistance:
at +25 °C 100 000 Mmin. or 1000 F whichever is less
at +125 °C 10 000 Mmin. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Voltage Proof Test:
X1 / Y2: min. 1500 VAC
X2: min. 1075 VDC
Peak Impulse Voltage:
X1 / Y2: 5000 V
X2: 2500 V
Voltage Rating DC:
X1 / Y2: 2000 VDC
X2: 1500 VDC
Climatic Category According to EN 60068-1:
55/125/21
Revision: 05-Apr-2019
1 Document Number: 45020
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

X7R Datasheet
www.vishay.com
VJ Safety Certified Capacitors X7R
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CASE
MAXIMUM VOLTAGE
(VAC)
CAPACITANCE
MINIMUM
MAXIMUM
X7R (X1 / Y2)
2008
2220
250
100 pF
1.0 nF
250
270 pF
4.7 nF
X7R (X2)
2008
2220
250
100 pF
2.7 nF
250
270 pF
12 nF
Notes
• Detail ratings see “Selection Chart”
• Size 2008 is compatible with 1808 solderlands and full conform with the IEC-60384-14 requirements for creepage distance
ORDERING INFORMATION
VJ2008
Y
102
K
XU
CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION AC VOLTAGE
CODE
NOMINAL CODE TOLERANCE
RATING
S
MARKING
T
PACKAGING
### (1)(2)
PROCESS
CODE
2008
2220
Y = X7R
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a multiplier.
Examples:
102 = 1000 pF
K = ± 10 %
M = ± 20 %
X = Ni barrier
100 % tin plated
U = 250 VAC
S = marked
(see Part Marking
table below)
T = 7" reel /
plastic tape
X1 = X1 / Y2
X2 = X2
Vishay
automotive
grade per
customer
request
add “A”:
X1A = X1 / Y2
X2A = X2
Notes
(1) Process code must be added to control products and requirements
(2) Vishay automotive grade “X1A” and “X2A” only for size 2008 and 2220
• Detail ratings see “Selection Chart”
PART MARKING
MARKING
VA
VM
1ST DIGIT
MANUFACTURER
V = Vishay
2ND DIGIT
DIELECTRIC AND RATING
A = X7R, X1 / Y2
M = X7R, X2
DIMENSIONS in inches (millimeters)
L
W
CASE
CODE
2008
2220
PART ORDERING
NUMBER
VJ2008
VJ2220
P
LENGTH
(L)
0.200 ± 0.010
(5.08 ± 0.25)
0.220 ± 0.008
(5.59 ± 0.20)
WIDTH
(W)
0.080 ± 0.010
(2.03 ± 0.25)
0.200 ± 0.010
(5.08 ± 0.25)
T
MAX.
MAXIMUM
THICKNESS
(T)
0.086
(2.18)
0.086
(2.18)
TERMINATION
(P)
MINIMUM
MAXIMUM
0.010
(0.25)
0.030
(0.76)
0.010
(0.25)
0.030
(0.76)
Revision: 05-Apr-2019
2 Document Number: 45020
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


Features Datasheet pdf www.vishay.com VJ Safety Certified Capa citors X7R Vishay Vitramon Surface Mou nt Multilayer Ceramic Chip Capacitors f or Safety Certified Applications FEATU RES • Approved IEC 60384-14 • Speci alty: safety certified capacitors • A EC-Q200 qualified available with PPAP f or size 2008 and 2220 • Wet build pro cess • Reliable Noble Metal Electrode (NME) system • Material categorizati on: for definitions of compliance pl ease see www.vishay.com/doc?99912 Avai lable APPLICATIONS • Power supplies • EMI and AC line filtering • EV ch arging systems • AC equipment and app liances • Lighting strike and voltage surge protection • Isolators • Fac simile and telephone ELECTRICAL SPECIF ICATIONS Note • Electrical characteri stics at +25 °C unless otherwise speci fied Operating Temperature: -55 °C to +125 °C Capacitance Range X1 / Y2 (1): 100 pF to 4.7 nF Capacitance Range X2 (1): 100 pF to 12 nF Voltage Range: 250 VAC Temperature Coefficient of Capacitance (TCC): ± 15 % from -55 °C to +125 °C, with 0 VDC ap.
Keywords X7R, datasheet, pdf, Vishay, Surface, Mount, Multilayer, Ceramic, Chip, Capacitors, 7R, R, , X7, X, , Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)