TSOP93538 Modules Datasheet

TSOP93538 Datasheet PDF, Equivalent


Part Number

TSOP93538

Description

IR Receiver Modules

Manufacture

Vishay

Total Page 8 Pages
PDF Download
Download TSOP93538 Datasheet PDF


TSOP93538
www.vishay.com
TSOP931.., TSOP933.., TSOP935..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
ADDITIONAL RESOURCES
3D 3D
3D Models
FEATURES
• Improved dark sensitivity
• Improved immunity against optical noise
• Very low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Supply voltage: 2.0 V to 3.6 V
• Insensitive to supply voltage ripple and noise
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
23051
MECHANICAL DATA
1 = OUT, 2 = GND, 3 = VS
DESCRIPTION
The TSOP93... series devices are the latest generation miniaturized IR receiver modules for infrared remote control systems.
These series provide improvements in sensitivity to remote control signals in dark ambient as well as in sensitivity in the
presence of optical disturbances e.g. from CFLs.
The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The
demodulated output signal can be directly connected to a microprocessor for decoding.
The TSOP931.., TSOP933.., and TSOP935.., series devices are designed to receive short burst codes (6 or more carrier cycles
per burst). The third digit designates the AGC level (AGC1, AGC3, or AGC5) and the last two digits designate the band-pass
frequency (see table below). The higher the AGC, the better noise is suppressed, but the lower the code compatibility. AGC3
provides enhanced noise suppression and AGC5 provides maximized noise suppression. Generally, we advise to select the
highest AGC that satisfactorily receives the desired remote code.
These components have not been qualified to automotive specifications.
PARTS TABLE
AGC
30 kHz
33 kHz
Carrier
36 kHz
frequency 38 kHz
40 kHz
56 kHz
Package
Pinning
Dimensions (mm)
Mounting
Application
Best choice for
LEGACY, FOR SHORT BURSTS ENHANCED NOISE SUPPRESSION MAXIMIZED NOISE SUPPRESSION
(AGC1)
(AGC3)
(AGC5)
TSOP93130
TSOP93330
TSOP93530
TSOP93133
TSOP93333
TSOP93533
TSOP93136
TSOP93336 (1)(5)
TSOP93536
TSOP93138
TSOP93338 (2)(4)
TSOP93538
TSOP93140
TSOP93340
TSOP93540
TSOP93156
TSOP93356
TSOP93556 (3)
Minimold
1 = OUT, 2 = GND, 3 = VS
5.4 W x 6.35 H x 4.9 D
Leaded
Remote control
(1) RCMM (2) RECS-80 Code (3) r-map (4) XMP-1, XMP-2 (5) MCIR
Note
• 30 kHz and 33 kHz only available on written request
Rev. 1.4, 31-Jul-2019
1 Document Number: 82840
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TSOP93538
www.vishay.com
BLOCK DIAGRAM
16833-13
30 kΩ
Input
AGC
Band
pass
Demo-
dulator
PIN Control circuit
TSOP931.., TSOP933.., TSOP935..
Vishay Semiconductors
APPLICATION CIRCUIT
17170-12
3
R1
Transmitter IR receiver
with
TSALxxxx
VS
+ VS
1 C1
OUT
μC
GND
VO GND
2
R1 and C1 recommended to reduce supply ripple for VS < 2.2 V
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Supply voltage
Supply current
Output voltage
Output current
Junction temperature
Storage temperature range
Operating temperature range
Power consumption
Soldering temperature
Tamb 85 °C
t 10 s, 1 mm from case
VS
IS
VO
IO
Tj
Tstg
Tamb
Ptot
Tsd
-0.3 to +3.6
3
-0.3 to (VS + 0.3)
5
100
-25 to +85
-25 to +85
10
260
V
mA
V
mA
°C
°C
°C
mW
°C
Note
• Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability
ELECTRICAL AND OPTICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
Supply current
Supply voltage
Transmission distance
Output voltage low
Ev = 0, VS = 3.3 V
Ev = 40 klx, sunlight
Ev = 0, test signal see Fig. 1,
IR diode TSAL6200, IF = 50 mA
IOSL = 0.5 mA, Ee = 0.7 mW/m2,
test signal see Fig. 1
ISD
ISH
VS
d
VOSL
0.25
-
2.0
-
-
0.37
0.50
-
28
-
0.45
-
3.6
-
100
Minimum irradiance
Test signal: XMP code
Test signal: NEC code
Ee min.
-
-
0.12 0.25
0.09 0.20
Maximum irradiance
tpi - 3.0/f0 < tpo < tpi + 3.5/f0,
test signal see Fig. 1
Ee max.
30
-
-
Directivity
Angle of half transmission
distance
ϕ1/2
-
± 45
-
UNIT
mA
mA
V
m
mV
mW/m2
W/m2
°
Rev. 1.4, 31-Jul-2019
2 Document Number: 82840
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


Features www.vishay.com TSOP931.., TSOP933.., TS OP935.. Vishay Semiconductors IR Recei ver Modules for Remote Control Systems ADDITIONAL RESOURCES 3D 3D 3D Models FEATURES • Improved dark sensitivity • Improved immunity against optical n oise • Very low supply current • Ph oto detector and preamplifier in one pa ckage • Internal filter for PCM frequ ency • Supply voltage: 2.0 V to 3.6 V • Insensitive to supply voltage ripp le and noise • Material categorizatio n: for definitions of compliance please see www.vishay.com/doc?99912 23051 MEC HANICAL DATA 1 = OUT, 2 = GND, 3 = VS DESCRIPTION The TSOP93... series device s are the latest generation miniaturize d IR receiver modules for infrared remo te control systems. These series provid e improvements in sensitivity to remote control signals in dark ambient as wel l as in sensitivity in the presence of optical disturbances e.g. from CFLs. Th e devices contain a PIN diode and a pre amplifier assembled on a lead frame. The epoxy package contains an IR filter. T.
Keywords TSOP93538, datasheet, pdf, Vishay, IR, Receiver, Modules, SOP93538, OP93538, P93538, TSOP9353, TSOP935, TSOP93, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)