TEN40-2410WI Converter Datasheet

TEN40-2410WI Datasheet PDF, Equivalent


Part Number

TEN40-2410WI

Description

DC/DC Converter

Manufacture

TRACO

Total Page 4 Pages
Datasheet
Download TEN40-2410WI Datasheet


TEN40-2410WI
DC/DC Converters
TEN 40WI Series, 40 Watt
Features
High power density: 40W in
2”x2”x0.4” metal package
Ultra wide 4:1 input voltage range
Very high efficiency up to 87 %
No minimum load required for
single output models
Over temperature protection
Under voltage lockout
Remote On/Off
Shielded metal case with insulated
baseplate
Optional heat-sink
3-year product warranty
UL 60950-1
The TEN 40WI series is a family of high performance 40W dc-dc converter modules
featuring ultra wide 4:1 input voltage ranges in a compact low profile case with
industry-standard footprint. A very high efficiency allows an operating temperature
range of –40°C to 85°C. Further standard features include remote On/Off, output
voltage trimming, over voltage protection, under voltage lockout, over temperature
and short circuit protection.
Typical applications for these products are battery operated equipment and distrib-
uted power architectures in communication and industrial electronics, everywhere
where isolated, tightly regulated voltages are required and space is limited on the
PCB.
Models
Ordercode
TEN 40-2410WI
TEN 40-2411WI
TEN 40-2412WI
TEN 40-2413WI
TEN 40-2422WI
TEN 40-2423WI
TEN 40-4810WI
TEN 40-4811WI
TEN 40-4812WI
TEN 40-4813WI
TEN 40-4822WI
TEN 40-4823WI
Input voltage range
9 – 36 VDC
(24 VDC nominal)
18 – 75 VDC
(48 VDC nominal)
Output voltage
3.3 VDC
5.0 VDC
12 VDC
15 VDC
±12 VDC
±15 VDC
3.3 VDC
5.0 VDC
12 VDC
15 VDC
±12 VDC
±15 VDC
Output current max.
10.0 A
8.0 A
3.35 A
2.65 A
±1.65 A
±1.35 A
10.0 A
8.0 A
3.35 A
2.65 A
±1.65 A
±1.35 A
Efficiency typ.
86 %
87 %
87 %
87 %
86 %
86 %
86 %
88 %
87 %
87 %
86 %
86 %
http://www.tracopower.com
Page 1 of 4

TEN40-2410WI
DC/DC Converters
TEN 40WI
40 Watt
Input Specifications
Input current (no load)
24 Vin single output models: 100 mA typ
48 Vin single output models: 60 mA typ
.
dual putput models: 30 mA typ
Input current (full load) (nominal input 24/48 VDC)
3.3 VDC models: 1680 / 840 mA typ.
other models: 2000 / 1000 mA typ.
Input voltage variation (dv/dt) 5 V/ms, max.
(complies with ETS300 132 part 4.4)
Start-up voltage / under voltage lockout
24 Vin models: 9 VDC / 8 VDC (typ.)
48 Vin models: 18 VDC / 16 VDC (typ.)
Surge voltage (100 msec. max.)
24 Vin models: 50 V max.
48 Vin models: 100 V max.
EMC characteristics (with external capacitors)
see application note: www.tracopower.com/overview/ten40wi
– Conducted noise EN 55022 level A, FCC part 15, level A
– ESD EN 61000-4-2, air: ±8 KV contact: ±6 KV,
perf. criteria A
– Fast transient EN 61000-4-4, ±2 KV, perf. criteria B
– Surge EN 61000-4-5, ±1 KV, perf. criteria A
Output Specifications
Voltage set accuracy (at nominal input and full load) ±1 %
Output voltage adjustment ±10 % (see application note)
Regulation
– Input variation Vin min. to Vin max. 0.2 % max.
– Load variation
single output models: 0.5 % max. (0 – 100 % load)
dual output models balanced load: 1.0 % max. (4 – 100 % load)
– Load cross variation 25 % / 100 % 5 % max.
Temperature coefficient 0.02 %/K max.
Ripple and noise (20 MHz Bandwidth)
3.3 VDC & 5 VDC output models: 50 mVpk-pk max.
dual outputs: 150 mVpk-pk max.
all other outputs: 75 mVpk-pk max.
Start up time (nominal Vin and constant resistive load) 25 ms typ.
Transient response time (25 % load change) 250 µs typ.
Short circuit protection indefinite (automatic recovery)
Over load protection 150 % of Iout max. typ. foldback
Thermal shutdown @ +110°C typ.
Over voltage protection
3.3 VDC models: 3.9 V
5 VDC models 6.2 V
12/±12 DC models: 15 /±15 V
15 VDC output: 18 /±18 V
Minimum load
– Single output
12 VDC models: 2% of rated max currrent
15 VDC models: 1.5% of rated max current
other models: not required.
– Dual output
±12 VDC models: 4 % of rated max current on each output
±15 VDC models: 4.5 % of rated max current on each output
(operation at lower load condition will not damage
these converters, however, they may not meet all
listed specifications)
Capacitive load output models
3.3 VDC models: 25’000 µF max.
5.0 VDC models: 13’000 µF max.
12 VDC models: 2’300 µF max.
15 VDC models: 1’500 µF max.
±12 VDC models: 1’200 µF max. (each output)
±15 VDC models: 750 µF max. (each output)
http://www.tracopower.com
Page 2 of 4


Features DC/DC Converters TEN 40WI Series, 40 Wat t Features ◆ High power density: 40 W in 2”x2”x0.4” metal package Ultra wide 4:1 input voltage range ◆ Very high efficiency up to 87 % No minimum load required for singl e output models ◆ Over temperature p rotection ◆ Under voltage lockout Remote On/Off ◆ Shielded metal ca se with insulated baseplate ◆ Optio nal heat-sink ◆ 3-year product warra nty UL 60950-1 The TEN 40WI series is a family of high performance 40W dc-dc converter modules featuring ultra wide 4:1 input voltage ranges in a compact l ow profile case with industry-standard footprint. A very high efficiency allow s an operating temperature range of – 40°C to 85°C. Further standard featur es include remote On/Off, output voltag e trimming, over voltage protection, un der voltage lockout, over temperature a nd short circuit protection. Typical ap plications for these products are batte ry operated equipment and distributed power architectures in communication and industrial ele.
Keywords TEN40-2410WI, datasheet, pdf, TRACO, DC/DC, Converter, EN40-2410WI, N40-2410WI, 40-2410WI, TEN40-2410W, TEN40-2410, TEN40-241, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)