F6102 Receiver Datasheet

F6102 Datasheet, PDF, Equivalent


Part Number

F6102

Description

Ka-Band SATCOM Receiver

Manufacture

Renesas

Total Page 3 Pages
Datasheet
Download F6102 Datasheet


F6102
Ka-Band SATCOM Receiver IC
17.5GHz to 21.5GHz
F6102 Advance
Short-Form Datasheet
Description
The F6102 is an 8-element receiver silicon IC designed using a
SiGe BiCMOS process for Ka-Band SATCOM phased array
applications. The core IC has 6-bit phase control coupled with 30dB
gain control on each channel to achieve fine beam steering and
gain compensation between radiating elements. The device has
16dB nominal electric gain and -30dBm IP1dB. The core chip
achieves an RMS phase error of 3° and RMS gain error of 0.3dB
over the frequency of operation. The typical total power con-
sumption is 0.32W (40mW per channel).
Competitive Advantage
High integration
Orthogonality of phase and amplitude control
Advanced Serial Peripheral Interface (SPI) with 4-state
memory
Superior channel-to-channel isolation
Minimal footprint
Typical Applications
Ka-Band SATCOM
Aerospace and Maritime
Beam Steering
Test and Measurement
Features
17.5GHz to 21.5GHz operation
8 radiation channels
6-bit phase control
20ns typical gain settling time
20ns typical phase settling time
3° typical RMS phase error
0.3dB typical RMS gain error
30dB gain attenuation range
5-bit IC address
Integrated proportional-to-absolute temperature (PTAT)
sensor with external biasing
-40°C to +95°C internal temperature sensor
Programmable 4-state on-chip memory
Supply voltage: +2.1V to +2.5V
-40°C to +95°C ambient operating temperature range
27°C typical ambient operating temperature
5mm x 5mm, 40-QFN package
Block Diagram
Figure 1. Block Diagram
RF1
RF2
RF3
RF4
RFC
RF8
RF7
RF6
RF5
© 2018 Integrated Device Technology, Inc.
1
September 27, 2018

F6102
F6102 Advance Short-Form Datasheet
Ordering Information
Orderable Part Number
Package
MSL Rating
Carrier Type
Temperature
F6102NTGK
5mm x 5mm 40-QFN
MSL 3
Tray -40° to +95°C
F6102NTGK8
5mm x 5mm 40-QFN
MSL 3
Reel -40° to +95°C
F6102EVB
Evaluation Board
F6102EVS
F6102 Evaluation Kit System, including Evaluation Board, 2x THRU Reference Fixture, FT2232H Mini-Module
Microcontroller, Digital Cable, Power Cable, and USB-to-Mini Cable
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138
www.IDT.com
Sales
1-800-345-7015 or 408-284-8200
Fax: 408-284-2775
www.IDT.com/go/sales
Tech Support
www.IDT.com/go/support
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modi fy the products and/or specifications described herein at any time,
without notice, at IDT's sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to per form the same
way when installed in customer products. The information contained herein is provided without representation or warra nty of any kind, whether express or implied, including, but not limited to, the suitability
of IDT's products for any particular purpose, an implied warranty of merchantability, or non -infringement of the intellectual property rights of others. This document is presented only as a guide and does not
convey any license under intellectual property rights of IDT or any third parties.
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be
reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the
property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated
Device Technology, Inc. All rights reserved.
© 2018 Integrated Device Technology, Inc.
2
September 27, 2018


Features Ka-Band SATCOM Receiver IC 17.5GHz to 21 .5GHz F6102 Advance Short-Form Datashe et Description The F6102 is an 8-eleme nt receiver silicon IC designed using a SiGe BiCMOS process for Ka-Band SATCOM phased array applications. The core IC has 6-bit phase control coupled with 3 0dB gain control on each channel to ach ieve fine beam steering and gain compen sation between radiating elements. The device has 16dB nominal electric gain a nd -30dBm IP1dB. The core chip achieves an RMS phase error of 3° and RMS gain error of 0.3dB over the frequency of o peration. The typical total power consu mption is 0.32W (40mW per channel). Com petitive Advantage  High integration  Orthogonality of phase and amplitu de control  Advanced Serial Peripher al Interface (SPI) with 4-state memory  Superior channel-to-channel isolati on  Minimal footprint Typical Applic ations  Ka-Band SATCOM  Aerospace and Maritime  Beam Steering  Tes t and Measurement Features  17.5GHz to 21.5GHz operation  8 radiation channels .
Keywords F6102, datasheet, pdf, Renesas, Ka-Band, SATCOM, Receiver, 6102, 102, 02, F610, F61, F6, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)