FP1007R6 inductors Datasheet

FP1007R6 Datasheet, PDF, Equivalent


Part Number

FP1007R6

Description

High current power inductors

Manufacture

EATON

Total Page 4 Pages
Datasheet
Download FP1007R6 Datasheet


FP1007R6
Technical Data 10007
Effective June 2017
Supersedes September 2012
FP1007R6
High frequency, high current power inductors
SMD Device
Product features
10.5 x 8.0 x 7.0mm Maximum surface mount
package
Ferrite core material
Controlled DCR tolerance for sensing circuits
Inductance Range from 150nH to 470nH
Current range from 23.5 to 75 Amps
Frequency range up to 2MHz
Halogen free, lead free, RoHS compliant
Applications
Multi-phase regulators
Voltage Regulator Modules (VRMs)
Desktop and server VRMs and EVRDs
Data networking and storage systems
Graphics cards and battery power systems
Point-of-Load modules
DCR Sensing
Environmental data
Storage temperature range (component):
-40 °C to +125 °C
Operating temperature range: -40 °C to +125 °C
(ambient plus self-temperature rise)
Solder reflow temperature:
J-STD-020 (latest revision) compliant
Pb
HFHALOGEN
FREE

FP1007R6
Technical Data 10007
Effective June 2017

Part
Number 7
FP1007R6-R15-R
FP1007R6-R18-R
FP1007R6-R22-R
FP1007R6-R27-R
FP1007R6-R33-R
FP1007R6-R39-R
FP1007R6-R47-R
OCL 1 ±10%
(nH)
150
180
220
270
330
390
470
FLL 2 Min.
(nH)
108
129
158
194
237
280
338
Product Speci cations
Irms 3
(Amps)
Isat 14 @25°C
(Amps)
75.0
60.0
50.0
61 41.0
33.0
28.0
23.5
Isat 25 @100°C
(Amps)
60.0
50.0
40.0
33.0
26.5
22.5
19.0
DCR @20°C
(mΩ)
0.29 ± 5%
K-Factor 6
348.8
1. Open Circuit Inductance (OCL) Test Parameters: 100kHz, 0.10Vrms, 0.0Adc
2. Full Load Inductance (FLL) Test Parameters: 100kHz, 0.1Vrms, Isat1
3. Irms: DC current for an approximate temperature rise of 40°C without core loss. Derating is
necessary for AC currents. PCB layout, trace thickness and width, air-flow, and proximity of
other heat generating components will affect the temperature rise. It is recommended that
the temperature of the part not exceed 125°C under worst case operating conditions
verified in the end application.
4. Isat1: Peak current for approximately 20% rolloff at +25°C.
5. Isat2: Peak current for approximately 20% rolloff at +100°C.
6. K-factor: Used to determine Bp-p for core loss (see graph). Bp-p = K * L
* ∆I * 10-3. Bp-p:(Gauss), K: (K-factor from table), L: (Inductance in nH),
∆I (peak-to-peak ripple current in Amps).
7. Part Number Definition: FP1007R6-Rxx-R
FP1007R6 = Product code and size
Rxx= Inductance value in uH, R = decimal point
-R suffix = RoHS compliant
Dimensions- mm
The nominal DCR is measured from point "A" to point "B"
Part Marking: 1007R6, Rxx = Inductance value in µH. (R = Decimal point) wwllyy = Date code R = Revision level Tolerance are
±0.15mm unless otherwise specified.
Soldering surfaces to be coplanar within 0.1016mm.
PCB tolerance ±0.1mm unless otherwise specified.
Packaging information - mm
1.75
11.5
1.5 dia
1.5 dia
1
2.0
4.0 A
2
8.1
Supplied in Tape-and-Reel packaging, 700 parts per 13 inch diameter reel.
12.0 A
24.0
±0.30
10.60
7.1
SECTION A-A
2 www.eaton.com/electronics


Features Technical Data 10007 Effective June 201 7 Supersedes September 2012 FP1007R6 H igh frequency, high current power induc tors SMD Device Product features • 1 0.5 x 8.0 x 7.0mm Maximum surface mount package • Ferrite core material • Controlled DCR tolerance for sensing ci rcuits • Inductance Range from 150nH to 470nH • Current range from 23.5 to 75 Amps • Frequency range up to 2MHz • Halogen free, lead free, RoHS comp liant Applications • Multi-phase reg ulators • Voltage Regulator Modules ( VRMs) • Desktop and server VRMs and E VRDs • Data networking and storage sy stems • Graphics cards and battery po wer systems • Point-of-Load modules DCR Sensing Environmental data • Storage temperature range (component): -40 °C to +125 °C • Operating tempe rature range: -40 °C to +125 °C (ambi ent plus self-temperature rise) • Sol der reflow temperature: J-STD-020 (late st revision) compliant Pb HFHALOGEN F REE Technical Data 10007 Effective June 2017  Part Number 7 FP1007R6-R15-R FP1007R6-R18-R FP1007R.
Keywords FP1007R6, datasheet, pdf, EATON, High, current, power, inductors, P1007R6, 1007R6, 007R6, FP1007R, FP1007, FP100, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)