PI3CH480 Mux/DeMux Datasheet

PI3CH480 Datasheet, PDF, Equivalent


Part Number

PI3CH480

Description

4-Channel 2:1 Mux/DeMux

Manufacture

Diodes

Total Page 11 Pages
Datasheet
Download PI3CH480 Datasheet


PI3CH480
Features
PI3CH480
4-Channel 2:1 Mux/DeMux, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug
Description
Pin Configuration
Block Diagram
TSSOP/QSOP Top View
Truth Table
EN S YA YB YC YD
Function
H X Hi-Z Hi-Z Hi-Z Hi-Z
Disable
L L IA0 IB0 IC0 ID0
S=0
L H IA1 IB1 IC1 ID1
S=1
Note: H=High Voltage Level; L=Low Voltage Level
UQFN3x3-16 Top View
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm
antimony compounds.
PI3CH480
Document Number DS40329 Rev 3-2
www.diodes.com
1
November 2018
© Diodes Incorporated

PI3CH480
Pin Description
Pin No of Pin No of
TSSOP UQFN3x3-
QSOP
16
1 15
Pin Name
S
2, 3, 5, 6, 16,1,3,4,
11,10,14,13 9,8,12,11
4, 7, 9, 12 2,5,7,10
86
15 13
16 14
Center Pad
IA0, IA1, IB0, IB1,
IC0, IC1, ID0, ID1
YA, YB, YC, YD
GND
1111111
EN
VCC
GND
PI3CH480
Description
Select Inputs
Data Inputs
Data Outputs
Ground
Enable
Power
Maximum Ratings
StorageTemperature....................................................................................-65°C to +150°C
Ambient Temperaturewith Power Applied........................................40°C to +85°C
SupplyVoltage to Ground Potential............................................................-0.5Vto +4.6V
DC Input Voltage ............................................................................................-0.5Vto +6.0V
DC Output Current.......................................................................................... 120mA
Power Dissipation..............................................................................................................0.5W
Note:
Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the device.
This is a stress rating only and functional operation of the
device at these or any other conditions above those
indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
DC Electrical Characteristics
3.3V Supply (Over Operating Range, TA = -40°C ~ +85°C, VCC = 3.3V ± 10%, unless otherwise noted)
Symbol
Description
Test Conditions(1)
Min Typ(2) Max Unit
VIH Control Input HIGH Voltage
Guaranteed Logic HIGH Level
2.0
V
VIL Control Input LOW Voltage
Guaranteed Logic LOW Level
-0.5
0.8 V
VIK Clamp Diode Voltage
VCC = Min., IIN = -18mA
-1.3 -1.8 V
IIH Input HIGH Current
VCC = Max., VIN = VCC
— — ±1 μA
IIL Input Low Current
VCC = Max., VIN = GND
— — ±1 μA
IOZH High-Impedance Current(3)
0 ≤ Y, In ≤ VCC
— — ±1 μA
RON Switch On-Resistance(4)
VCC = Min., VIN = 0.0V
ION = -48mA or -64mA
VCC = Min., VIN = 3.6V
ION = -15mA
4
5
6
8
Notes:
1. For maximum or minimum conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 3.3V, TA = 25°C ambient and maximum loading.
3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
4. Measured by the voltage drop between Y and In pin at indicated current through the switch. ON resistance is determined by the lower of the
voltages on the two (Y, In) pins.
PI3CH480
Document Number DS40329 Rev 3-2
www.diodes.com
2
November 2018
© Diodes Incorporated


Features Features              PI3CH480 4-Channe l 2:1 Mux/DeMux, Enable Low 1.8V/2.5V/3 .3V, High-Bandwidth, Hot Plug Descripti on Pin Configuration Block Diagram TS SOP/QSOP Top View Truth Table EN S YA YB YC YD Function H X Hi-Z Hi-Z Hi-Z Hi-Z Disable L L IA0 IB0 IC0 ID0 S= 0 L H IA1 IB1 IC1 ID1 S=1 Note: H=Hi gh Voltage Level; L=Low Voltage Level UQFN3x3-16 Top View Notes: 1. No purpo sely added lead. Fully EU Directive 200 2/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2 015/863/EU (RoHS 3) compliant. 2. See h ttps://www.diodes.com/quality/lead-free / for more information about Diodes Inc orporated’s definitions of Halogen- a nd Antimony-free, "Green" and Lead-free . 3. Halogen- and Antimony-free "Green products are defined as those which contain <900ppm bromine, <900ppm chlori ne (<1500ppm total Br + Cl) and <1000pp m antimony compounds. PI3CH480 Documen t Number DS40329 Rev 3-2 www.diodes.co m 1 November 2018 © Diodes Incorporated Pin Description Pin No of Pin No of TSSOP UQFN3x3.
Keywords PI3CH480, datasheet, pdf, Diodes, 4-Channel, 2:1, Mux/DeMux, I3CH480, 3CH480, CH480, PI3CH48, PI3CH4, PI3CH, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)