NTC Thermistors. NTCLE203E3 Datasheet

NTCLE203E3 Thermistors. Datasheet pdf. Equivalent

NTCLE203E3 Datasheet
Recommendation NTCLE203E3 Datasheet
Part NTCLE203E3
Description NTC Thermistors
Feature NTCLE203E3; www.vishay.com NTCLE203E3 Vishay BCcomponents NTC Thermistors, Radial Leaded, Accuracy Line ADDIT.
Manufacture Vishay
Datasheet
Download NTCLE203E3 Datasheet





Vishay NTCLE203E3
www.vishay.com
NTCLE203E3
Vishay BCcomponents
NTC Thermistors, Radial Leaded, Accuracy Line
ADDITIONAL RESOURCES
3D 3D
3D Models
Design Tools
Models
QUICK REFERENCE DATA
PARAMETER
VALUE
UNIT
Resistance value at 25 °C
2K to 470K
Tolerance on R25-value
B25/85-value
Tolerance on B25/85-value
Operating temperature range at:
± 1; ± 2; ± 3; ± 5
3528 to 4570
± 0.5 to ± 2.0
%
K
%
Zero power dissipation (continuously)
Zero power dissipation
(for short periods) (2)
-40 to +125
150
°C
Maximum power dissipation at 55 °C
100
mW
Dissipation factor in still air (for info)
Response time (1)
Thermal time constant (1)
2.2
1.7
13
mW/K
s
Mass
0.11
g
Notes
(1) Response time in silicone oil MS200/50. This is the time needed
for the sensor to reach 63.2 % of the total temperature
difference when subjected to a temperature change from 25 °C
in air to 85 °C in oil. Thermal time constant by cooling from
electrically pre-heated body
(2) Valid for all types with the exception of the R25 values 12 k,
22 kand 470 k
FEATURES
• Accurate over a wide temperature range
(tolerance on B-value down to 0.5 %)
• Good stability over a long life
Available
• Excellent price/performance ratio
• Low heat conductivity through 0.4 mm Ni-leads
• cULus recognized, file E148885
(UL category XGPU2/XGPU8)
• Mounting: radial
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Temperature measurement, sensing and control in
industrial, consumer and telecom applications. For
on-board sensing or accurate remote sensing
DESCRIPTION
These thermistors are made of NTC ceramic material. The
device consists of a chip with two tinned nickel leads. The
parts are coated and color band marked. Tape and reel
versions available on request.
PACKAGING
The thermistors are packed in cardboard boxes; the
smallest packing quantity is 500 units.
DESIGN-IN SUPPORT
For complete curve computation, please visit:
www.vishay.com/thermistors/ntc-curve-list/.
MARKING
The thermistors are marked with color bands on a gray
epoxy base coating; see Dimensions and “Electrical Data
and Ordering Information”.
MOUNTING
By soldering in any position. Not intended for potting.
ELECTRICAL DATA AND ORDERING INFORMATION
CODING
UL
R25 R25-TOL. B25/85 B25/85-TOL. (see dimensions) APPROVED
() (± %) (K) (± %)
I II
Y/N
2000 1, 2, 3, 5 3528 0.5 Orange Orange
2700 1, 2, 3, 5 3977 0.75
Red Red
4700 1, 2, 3, 5 3977 0.75
Green Green
5000 1, 2, 3, 5 3977 0.75
Black White
10 000 1, 2, 3, 5 3977 0.75
Blue Blue
12 000 1, 2, 3, 5 3740
2
Yellow Yellow
22 000 1, 2, 3, 5 3740
2
White White
47 000 1, 2, 3, 5 4090
1.5
Black Black
68 000 1, 2, 3, 5 4190
1.5
Grey Grey
100 000 1, 2, 3, 5 4190 1.5 Brown Brown
470 000 1, 2, 3, 5 4570
1.5
Violet Violet
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
SAP MATERIAL AND ORDERING NUMBER (1)
RoHS COMPLIANT
WITH EXEMPTION (2)
202*B0
272*B0
472*B0
502*B0
103*B0
123*B0
223*B0
473*B0
683*B0
104*B0
474*B0
RoHS COMPLIANT
202*B0A
272*B0A
472*B0A
502*B0A
103*B0A
123*B0A
223*B0A
473*B0A
683*B0A
104*B0A
474*B0A
Notes
(1) Replace * in SAP by J for ± 5 %, H for ± 3 %, G for ± 2 %, F for ± 1 %
(2) RoHS exemption 7(c)-I: electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in
capacitors, e.g. piezo-electronic devices, or in a glass or ceramic matrix compound
Revision: 28-Oct-2019
1 Document Number: 29048
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000



Vishay NTCLE203E3
www.vishay.com
DIMENSIONS in millimeters
B
I
II H2
H1
F
L
T
I
II
DERATING
P
(%)
100
NTCLE203E3
Vishay BCcomponents
d
B max. T max. H1 H2 max. L
dF
3.6 3.0 2.0 ± 1.0 6.0 40 ± 1.5 0.4 ± 0.04 2.54
0
- 40
0
55 85
150
Tamb (°C)
Power derating curve
Note
• Zero power is considered as measuring power max. 1 % of max.
power
LONG TERM STABILITY AS A FUNCTION OF TEST DURATION AT MAXIMUM TEMPERATURE (150 °C)
TYPICAL R25 STABILITY
TYPICAL ROOM TEMPERATURE STABILITY
0.4
R25
R 25
(%)
0.2
0
Max.
Ave.
Min.
0.05
T
(K)
0
-0.05
Min.
Ave.
Max.
-0.2
102
103 104
Test Duration (h)
Typical curves valid for 2.2 kto 10 k
-0.1
102
103 104
Test Duration (h)
Typical curves valid for 2.2 kto 10 k
Revision: 28-Oct-2019
2 Document Number: 29048
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000



Vishay NTCLE203E3
www.vishay.com
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2019
1
Document Number: 91000





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)